3M 7000132153 3M™ Heat Shrink ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$59.66
$10.51
3M 7000132153 3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN-0800, 8-1/0 AWG, Expanded/Recovered I.D. 0.80/0.20 in, 6 in Length, 100/case

3M 7000132153 3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN-0800, 8-1/0 AWG, Expanded/Recovered I.D. 0.80/0.20 in, 6 in Length, 100/case

(No reviews yet) Write a Review

Model: 7000132153
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$59.66
$10.51
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN-0800, 8-1/0 AWG, Expanded/Recovered I.D. 0.80/0.20 in, 6 in Length, 100/case

  • Features

    • HIGHLY RESISTANT: Delivers mechanical and environmental protection against abrasion, corrosion, and chemicals
    • IDEAL FOR A VARIETY OF APPLICATIONS: Used for insulating secondary splices; direct-buried, submersible, or dig in repairs; and physical protection of high voltage, air-insulated connectors or lugs
    • VOLTAGE: UL 486D, Voltage Rating 600 V; Applies to: ITCSN 0400, 0800, 1100, 1500, 2000; CSA Certified ITCSN 0400, 0800, 1100, 1500, 2000, 3000
    • DURABLE CONSTRUCTION: Adhesive-lined, split resistant, fast shrinking, and made from cross-linked polyolefin; non-adhesive options are also available
    • CERTIFICATIONS: UL Listed, CSA Certified, and RoHS 2011/65/EU Compliant
    • WIDE OPERATING TEMPERATURE RANGE: Withstands temperatures between 67–230 °F (55–110 °C)

Manufacturer Resources

Product Specs

Adhesive Lined:
Yes
Ais Url Article Information Sheet :
https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSu9n_zu8l00xmY_GMxm94v70k17zHvu9lxtD7xtBevSS
Cable Size Range:
8-1/0 AWG
Chemical Resistant:
Yes
Country Of Origin:
United States
Dielectric Strength V Mil :
500 V/mil
Direct Bury:
Yes
Elongation Uom:
%
Etim Class 8 0:
EC000217
Expanded Inner Diameter:
0.8 in
Expanded Inner Diameter Metric :
20.3 mm
Flame Retardant:
No
Flammability Rating:
Non-Flame Retardant
Heat Shrink Type:
Adhesive-Lined Polyolefin Heat Shrink Tubing
Inner Diameter After Shrink Imperial :
0.2 in
Inner Diameter After Shrink Metric :
0.508 cm²
Inner Diameter Before Shrink Imperial :
0.8 in
Inner Diameter Before Shrink Metric :
2.032 cm²
Manufacturing Origin:
USA
Maximum Operating Temperature Celsius :
100
Maximum Operating Temperature Celsius Uom:
Degree
Maximum Operating Temperature Fahrenheit :
230.0 Degree
Maximum Voltage Rating:
1 kV
Minimum Expanded Tubing I D :
0.8 in
Minimum Shrink Temperature Celsius :
121
Minimum Shrink Temperature Fahrenheit :
250 °F
Non Corrosive:
Yes
Operating Temperature Celsius :
-55 to 100 Degrees Celsius
Operating Temperature Fahrenheit :
-67 °F to 230 °F
Operating Temperature Range Celsius :
-55 °C to -100 °C
Operating Temperature Range Fahrenheit :
-67 °F to 230 °F
Overall Length Imperial :
6.0 in
Overall Length Metric :
152.4 mm
Product Color:
Black
Product Material:
Adhesive-lined Polyolefin
Product Type:
Splice
Product Voltage:
1 kV
Rds Url Regulatory Data Sheet :
https://cdmsweb.3m.com/ingredientcommunication/file/Media/3oiRvIxw8vI=
Recovered Inner Diameter:
0.2 in
Recovered Inner Diameter Metric :
5.1 mm
Rohs Eu Comments:
RoHS 2011/65/EU compliant without exemption
Shelf Life:
3600
Shrink Ratio:
4:01
Solution For:
Access Network: FTTH/FTTB/CATV
Specifications Met:
UL 486D*
Splice Type:
Heat Shrink
Tensile Strength Imperial :
2400 Pound-Force Per Square Inch
Tubing Type:
Heavy Wall
Units Per Case:
100
Department:
Electrical

3M 7000132153 – Frequently Asked Questions

1) Can this 3M heat shrink sleeve be used on a direct-buried or submerged splice?
Yes. The ITCSN-0800 is rated for direct bury, and the adhesive lining is what makes that work: as the polyolefin recovers, the hot-melt adhesive flows and seals the ends against moisture. 3M lists it for direct-buried, submersible, and dig-in repairs, plus secondary splice insulation. It is also non-corrosive and chemical resistant, which matters in wet vaults and contaminated soil.
2) What voltage is the ITCSN-0800 sleeve rated for?
Two numbers get quoted on this sleeve and they mean different things. The UL 486D listing covers it at 600 V, which is the rating you cite for a code-compliant secondary splice. The product voltage rating in 3M's data is 1 kV. Dielectric strength is 500 V/mil of wall. For high voltage work it is used as physical protection over air-insulated connectors or lugs, not as the primary insulation system.
3) Is this heat shrink tubing flame retardant?
No. The ITCSN-0800 is classed non-flame retardant. It is built for mechanical and environmental protection (abrasion, corrosion, chemicals) on buried and outdoor splices, not for applications where a flame-retardant or plenum-rated jacket is specified. If your spec calls for flame retardancy, this is the wrong sleeve.
4) Is 6 inches of sleeve long enough to cover my splice?
Each ITCSN-0800 piece is 6.0 in (152.4 mm) long. Measure your finished connector or crimp barrel and allow overlap onto the cable jacket at both ends so the adhesive has clean jacket to seal to. A short compression lug or an inline crimp on 8 AWG through 1/0 typically lands well inside 6 inches; a long barrel or an offset splice may not, and in that case you step up to a longer ITCSN sleeve rather than butting two pieces together.
5) How many sleeves come in a case of 3M 7000132153?
Part 7000132153 is a case of 100 individual 6-inch ITCSN-0800 sleeves, black. That is the packaging for crews doing repeat secondary splices or utility repair work rather than a one-off job.
6) Does the ITCSN-0800 meet UL and CSA, and is it RoHS compliant?
It is UL Listed to UL 486D at 600 V and CSA Certified, and 3M lists it RoHS 2011/65/EU compliant without exemption. The UL 486D voltage rating applies across ITCSN 0400, 0800, 1100, 1500 and 2000; CSA certification also covers the 3000. Country of origin is the United States, which matters if you are buying against a domestic-preference spec.
7) What is the difference between heavy-wall adhesive-lined sleeve and ordinary thin-wall heat shrink?
Heavy wall is what the ITCSN-0800 is, and the wall thickness plus the internal hot-melt adhesive is the whole point. Thin-wall tubing insulates but does not seal, so it is fine in a dry panel and wrong in a hand hole. The heavy-wall cross-linked polyolefin body takes abrasion and dig-in abuse, tensile strength runs 2400 psi, and the adhesive gives you a moisture block good for direct bury and submersion. Non-adhesive versions of this tubing exist for jobs that only need re-enterable insulation.
8) Can I use this sleeve on fiber and CATV drop hardware, or is it power only?
3M lists the ITCSN sleeve for access network work including FTTH, FTTB and CATV, alongside its use insulating secondary power splices. Same sleeve, same 0.80 in expanded to 0.20 in recovered range, so the deciding factor is the outside diameter of whatever you are covering rather than the type of circuit.
How fast can I get the 3M 7000132153 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the 3M 7000132153 come with a warranty?
Absolutely. The 3M 7000132153 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the 3M 7000132153?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the 3M 7000132153 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!