3M 7000132375 3M™ Heat Shrink ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$89.13
$42.72
3M 7000132375 3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN-2000, 250-750 kcmil, Expanded/Recovered I.D. 2.00/0.65 in, 12 in Length, 10/Case

3M 7000132375 3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN-2000, 250-750 kcmil, Expanded/Recovered I.D. 2.00/0.65 in, 12 in Length, 10/Case

(No reviews yet) Write a Review

Model: 7000132375
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$89.13
$42.72
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN-2000, 250-750 kcmil, Expanded/Recovered I.D. 2.00/0.65 in, 12 in Length, 10/Case

  • Features

    • VOLTAGE: UL 486D, Voltage Rating 600 V; Applies to: ITCSN 0400, 0800, 1100, 1500, 2000; CSA Certified ITCSN 0400, 0800, 1100, 1500, 2000, 3000
    • CERTIFICATIONS: UL Listed, CSA Certified, and RoHS 2011/65/EU Compliant
    • WIDE OPERATING TEMPERATURE RANGE: Withstands temperatures between 67–230 °F (55–110 °C)
    • DURABLE CONSTRUCTION: Adhesive-lined, split resistant, fast shrinking, and made from cross-linked polyolefin; non-adhesive options are also available
    • HIGHLY RESISTANT: Delivers mechanical and environmental protection against abrasion, corrosion, and chemicals
    • IDEAL FOR A VARIETY OF APPLICATIONS: Used for insulating secondary splices; direct-buried, submersible, or dig in repairs; and physical protection of high voltage, air-insulated connectors or lugs


7000132375 - spec sheet

Manufacturer Resources

Product Specs

Adhesive Lined:
Yes
Cable Size Range:
250-750 kcmil
Chemical Resistant:
Yes
Country Of Origin:
United States
Dielectric Strength V Mil :
500 V/mil
Direct Bury:
Yes
Elongation Uom:
%
Etim Class 8 0:
EC000217
Expanded Inner Diameter:
2.0 in
Expanded Inner Diameter Metric :
50.8 mm
Flame Retardant:
No
Flammability Rating:
Non-Flame Retardant
Heat Shrink Type:
Adhesive-Lined Polyolefin Heat Shrink Tubing
Inner Diameter After Shrink Imperial :
0.65 in
Inner Diameter After Shrink Metric :
1.651 cm²
Inner Diameter Before Shrink Imperial :
2.0 in
Inner Diameter Before Shrink Metric :
5.08 cm²
Manufacturing Origin:
USA
Maximum Operating Temperature Celsius :
100
Maximum Operating Temperature Celsius Uom:
Degree
Maximum Operating Temperature Fahrenheit :
230.0 Degree
Maximum Voltage Rating:
1 kV
Minimum Expanded Tubing I D :
2.0 in
Minimum Shrink Temperature Celsius :
121
Minimum Shrink Temperature Fahrenheit :
250 °F
Non Corrosive:
Yes
Operating Temperature Celsius :
-55 to 100 Degrees Celsius
Operating Temperature Fahrenheit :
-67 °F to 230 °F
Operating Temperature Range Celsius :
-55 °C to -100 °C
Operating Temperature Range Fahrenheit :
-67 °F to 230 °F
Overall Length Imperial :
12.0 in
Overall Length Metric :
304.8 mm
Product Color:
Black
Product Material:
Adhesive-lined Polyolefin
Product Type:
Splice
Product Voltage:
1 kV
Recovered Inner Diameter:
0.65 in
Recovered Inner Diameter Metric :
16.5 mm
Rohs Eu Comments:
RoHS 2011/65/EU compliant without exemption
Shelf Life:
3600
Shrink Ratio:
3:01
Solution For:
Access Network: FTTH/FTTB/CATV
Specifications Met:
UL 486D*
Splice Type:
Heat Shrink
Tensile Strength Imperial :
2400 Pound-Force Per Square Inch
Tubing Type:
Heavy Wall
Units Per Case:
10
Department:
Electrical

3M 7000132375 – Frequently Asked Questions

1) What cable sizes will the 3M ITCSN-2000 heat shrink sleeve fit?
The ITCSN-2000 heavy-wall sleeve covers 250 to 750 kcmil conductors. It goes on at a 2.0 inch expanded inner diameter and recovers down to 0.65 inch, a 3:1 shrink ratio, so it grips down tight over a range of connector and cable diameters within that band. Slide it on before you crimp, not after.
2) Can this 3M heavy-wall sleeve be direct buried or used in a wet vault?
Yes. The ITCSN-2000 is rated for direct burial, and it is adhesive-lined, so the inner wall melts and flows into the connector and cable jacket to form a moisture seal. 3M calls out direct-buried, submersible, and dig-in repair work as intended uses.
3) What voltage is the ITCSN-2000 sleeve rated for?
1 kV maximum, with a UL 486D 600 V rating called out for the ITCSN family. Dielectric strength is 500 V/mil. It is meant for insulating secondary splices and for physical protection over high voltage air-insulated connectors and lugs, not as primary insulation on a medium-voltage cable.
4) What temperature do I need to hit to shrink this 3M sleeve, and how hot can it run afterward?
Minimum shrink temperature is 250 F (121 C), so a propane torch with a spreader or a heavy-duty heat gun will do it. Once installed it operates from -67 F to 230 F (-55 C to 100 C). Work the heat around the circumference from the center outward so the adhesive flows evenly and air pushes out the ends.
5) Is 3M heat shrink tubing a substitute for a compression splice?
No, and this is the most common mix-up on an order. The ITCSN-2000 is insulation and environmental protection only. The electrical connection itself is made with a compression connector like the Burndy YS6C Hylink long barrel copper splice, then the heavy-wall sleeve goes over it. Order both for a buried or submersible secondary splice.
6) Can a Burndy YS6C Hylink compression splice be used instead of the 3M ITCSN-2000 heat shrink sleeve?
No, they do different jobs on the same splice. The Burndy YS6C is a Hylink long barrel copper compression splice, meaning it is the metallic connector that joins the two conductors and carries current. The 3M ITCSN-2000 is a heat shrink heavy-wall cable sleeve, an adhesive-lined polyolefin tube that slides over a completed splice and shrinks down to insulate and seal it. On a 250-750 kcmil secondary splice you typically use a compression connector to make the joint and a sleeve like the ITCSN-2000 to insulate it, so the YS6C is a companion item rather than a substitute.
7) I need a direct buried repair on a 500 kcmil secondary run. Is a compression splice alone enough, or do I need the 3M sleeve too?
A compression connector such as the Burndy YS6C Hylink copper splice restores the conductor path but leaves bare metal at the joint. The 3M ITCSN-2000 heavy-wall sleeve is rated for direct-buried, submersible, and dig-in repair use, is adhesive-lined for sealing, and carries a 600 V rating under UL 486D with a 1 kV maximum voltage rating, so it is what provides the moisture and abrasion barrier on a buried repair. For 500 kcmil the ITCSN-2000 covers it, with a 2.00 in expanded I.D. recovering to 0.65 in over a 12 in length.
8) Is this sleeve long enough to cover a long-barrel compression connector on 500 kcmil?
The sleeve is 12 inches long (304.8 mm) and must overlap onto sound jacket on both sides of the connector. On a long-barrel copper compression splice such as the Burndy YS6C Hylink, measure the finished barrel plus at least an inch of overlap each end before committing to a single 12 inch piece.
9) Is the 3M ITCSN-2000 flame retardant?
No. The ITCSN-2000 is classified non-flame retardant. If the installation is in a plenum or anywhere the spec calls for a flame-retardant covering, this is the wrong sleeve. For buried, vault, and outdoor secondary work it is doing the job it was built for: abrasion, corrosion, and chemical protection.
10) What should I order if the splice body is larger than 2 inches in diameter?
The ITCSN-2000 starts at a 2.0 in minimum expanded tubing I.D., so the completed connector has to slip inside 2 inches before shrinking. If the joint is bulkier than that, step up within the ITCSN family rather than forcing this size; the ITCSN line also includes 3000-size tubing, which the CSA certification covers alongside the 0400, 0800, 1100, 1500 and 2000 sizes. A metallic connector such as the Burndy YS6C Hylink long barrel copper splice is not an alternative here, since it makes the conductor joint rather than insulating it.
11) Will this 3M sleeve hold up against chemicals and corrosion in an industrial or coastal site?
Cross-linked polyolefin construction, chemical resistant and non-corrosive, with a tensile strength of 2400 psi. It is split resistant and gives mechanical protection against abrasion on top of the environmental seal, which is why it is specified for dig-in repairs where the sleeve takes handling and backfill.
12) Is there a flame retardant alternative for an indoor cable tray run?
The 3M ITCSN-2000 is listed as non-flame retardant, which is normal for a heavy-wall adhesive-lined polyolefin sleeve built for buried and submersible sealing across a -67 to 230 degrees F range. If a job specification calls for a flame retardant jacket, that is a different tubing family and not something a compression connector solves either, since the Burndy YS6C Hylink copper splice is the conductor joint and carries no insulation of its own.
How fast can I get the 3M 7000132375 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the 3M 7000132375 come with a warranty?
Absolutely. The 3M 7000132375 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the 3M 7000132375?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the 3M 7000132375 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!