Metallics JFWPB20 8 x 1-1/4 in...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$192.86
Metallics JFWPB20 8 x 1-1/4 in. Flat Head Phillips Wood Screws - Brass - 100qty

Metallics JFWPB20 8 x 1-1/4 in. Flat Head Phillips Wood Screws - Brass - Each

(No reviews yet) Write a Review

Model: JFWPB20
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$192.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 1-1/4 in. Flat Head Phillips Wood Screws - Brass - 100qty

  • Features

    • Flat Head with Phillips Drive
    • Brass Material
    • 8 Diameter, 1-1/4" Length

  • Additional Notes

    • Other sizes and quantities available by request | Length of Thread: Length = 1 inch then 2/3 thread

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ASME B18.6.1
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
0.100 - 0.100 in.
Fastener Head Type:
Flat
Fastener Head Width:
0.292 - 0.332 in.
Fastener Length:
1/1/04
Field Application:
Electrical, Plumbing, Heating, Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Flat_Head_Wood_Screw_Brass.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.113 - 0.136
Phillips Recess Diameter:
0.191 - 0.204
Phillips Recess Width:
0.032
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.61 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Thread Per Inch:
15
Thread Standard:
ASME B18.6.1-1997
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Wood Screw
Type2:
Wood Screw
Series:
JFWPB
Product Details:
Wood Screw
Product Material:
Brass

Metallics JFWPB20 – Frequently Asked Questions

1) Are Metallics JFWPB20 brass wood screws Buy American or ARRA compliant?
No on both counts. The JFWPB20 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. If you are buying for a federally funded project with domestic sourcing requirements, this part will not satisfy them.
2) Will a #8 flat head screw sit flush in a countersunk hole?
Yes, if the countersink matches the head. The flat head on the JFWPB20 measures 0.292 to 0.332 inch across and 0.100 inch high, so an 82 degree countersink sized for a #8 flat head brings it flush or slightly below the surface. Flat head geometry here follows ASME B18.6.1.
3) What size Phillips driver do I need for #8 brass flat head wood screws?
A #2 Phillips bit. The JFWPB20 recess runs 0.191 to 0.204 inch in diameter and 0.113 to 0.136 inch deep, which is standard #2 territory. Brass is soft, so a sharp #2 bit and moderate torque matter more here than on a steel screw.
4) Why use brass wood screws instead of steel?
Two reasons drive it. Brass does not rust, so it holds up in damp or exterior-adjacent work and will not bleed stain into oak or cedar. And it is non-magnetic and non-sparking, which is why these get specified on electrical, plumbing, heating and air conditioning work. Trade-off: brass is softer than steel, so pilot hole it and do not overdrive.
5) Do I need a pilot hole for #8 brass wood screws?
Yes, in any hardwood and in most softwood near an edge. Brass shears easily, and with 15 threads per inch on a #8 body the screw generates real torque before it seats. Drill a pilot for the threaded portion and a clearance hole through the top piece so the head pulls down instead of twisting the head off.
6) What standard do these brass flat head wood screws conform to?
Head and body dimensions follow ASME B18.6.1, with threads to ASME B18.6.1-1997. That matters if a drawing calls out a standard wood screw head profile, because countersinks, finish washers and cup washers cut for B18.6.1 #8 flat heads will seat correctly on these.
How fast can I get the Metallics JFWPB20 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JFWPB20 come with a warranty?
Absolutely. The Metallics JFWPB20 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JFWPB20?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JFWPB20 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!