Metallics CPD1M 8 x 15/8 in. B...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.31
$0.31
Metallics CPD1M 8 x 15/8 in. Bugle Head Square & Phillips Deck Screws - Steel Ceramic - Type 17 - Coarse Threads - 1000qty

Metallics CPD1M 8 x 15/8 in. Bugle Head Square & Phillips Deck Screws - Steel Ceramic - Type 17 - Coarse Threads - Each

(No reviews yet) Write a Review

Model: CPD1M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.31
$0.31
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 15/8 in. Bugle Head Square & Phillips Deck Screws - Steel Ceramic - Type 17 - Coarse Threads - 1000qty

  • Kit Components

    • #1 Drive Power Bit

  • Features

    • Steel Ceramic Coated
    • Includes Free Power Bit
    • Bugle Head with Square & Phillips Drive
    • Ceramic Polymer Coating Protects Against Corrosion, Good wear resistance and can be used in pressure treated lumber, Excellent resistance to UV radiation, Flat Head With Nibs, Combo Square-Phillips Drive
    • 8 Diameter, 15/8" Length

  • Additional Notes

    • Other sizes and quantities available by request | In the abscence of a single industry standard for Bugle Heads, these dimensions are offered as a guide; slight deviations are acceptable. | In the abscence of a single industry standard for Deck Screws, these dimensions are offered as a guide; slight deviations are acceptable. | There is no single standard for deck screw dimensions. These values are offered as a guide; deviations from these specifications may occur.

Manufacturer Resources

Product Specs

Minimum Purchase:
1000 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Square/Phillips
Driver Size:
#2
Fastener Head Height:
0.020 - 0.039 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.315 - 0.363 in.
Fastener Length:
1/5/08
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Sq_Phil_Type_17_Coarse_Thrd_Deck_Scr.pdf
Order Minimum Imperial:
1000
Order Minimum Uom Imperial:
TH
Pack Type:
Jar
Phillips Recess Depth:
0.124
Phillips Recess Diameter:
0.176 - 0.201
Product Group:
Fasteners
Product Height:
1.75 in
Product Length:
11 in
Product Weight:
6.27 lbs
Product Width:
7.25 in
Screw Point Type:
Type 17
Square Recess Depth:
0.064 - 0.075
Square Recess Width:
0.110 - 0.113
Sub Division:
Electrical-E H2
Thread Per Inch:
8 to 10
Thread Spacing:
Coarse
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Deck Screw
Type2:
Deck Screw
Series:
CPD
Product Finish:
Ceramic Polymer Coating
Product Details:
Deck Screw
Product Material:
Steel Ceramic

Metallics CPD1M – Frequently Asked Questions

1) Do I need to pre-drill for these #8 deck screws?
The CPD1M has a Type 17 point, which is the auger-cut tip made to self-start in wood and clear chips so softwood and treated lumber do not need a pilot hole in most cases. Coarse UNC threading at 8 to 10 threads per inch is what you want in wood rather than a fine thread.
2) Are Metallics CPD1M screws Buy American or ARRA compliant for a government job?
No on both counts. The CPD1M is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. If your contract carries domestic sourcing language, this screw will not satisfy it.
3) What driver bit do I need for Metallics CPD1M deck screws, and is one included?
It takes a #2 driver, and the head is a combo square and Phillips recess so either a square drive or a Phillips bit will seat. A #1 drive power bit ships with the screws, so you can run them out of the jar without pulling a separate bit.
4) Will a bugle head deck screw sit flush, or do I have to countersink it?
The bugle head draws itself flush into wood as it seats, so no separate countersink step. Head width runs 0.315 to 0.363 inches and head height 0.020 to 0.039 inches, and the head has nibs that cut the fibers as it pulls down. Note there is no single industry dimensional standard for bugle heads or deck screws, so treat those figures as a guide.
5) Will a ceramic coated deck screw corrode against treated lumber the way plain steel does?
The CPD1M is steel with a ceramic polymer coating specifically for corrosion resistance, and it is rated for pressure treated lumber, where the copper-based preservatives in modern ACQ-type treatment eat uncoated steel. It also has good wear resistance, so the coating survives being driven rather than stripping off at the threads.
6) How much does a 1,000 count jar of CPD1M screws weigh for shipping?
A jar runs 6.27 lbs. Useful if you are palletizing a multi-jar order or working to a weight limit on a jobsite delivery.
How fast can I get the Metallics CPD1M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics CPD1M come with a warranty?
Absolutely. The Metallics CPD1M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics CPD1M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics CPD1M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!