Metallics JCPD1 8 x 15/8 in. B...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.44
$0.44
Metallics JCPD1 8 x 15/8 in. Bugle Head Square & Phillips Deck Screws - Steel Ceramic - Type 17 - Coarse Threads - 100qty

Metallics JCPD1 8 x 15/8 in. Bugle Head Square & Phillips Deck Screws - Steel Ceramic - Type 17 - Coarse Threads - Each

(No reviews yet) Write a Review

Model: JCPD1
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.44
$0.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 15/8 in. Bugle Head Square & Phillips Deck Screws - Steel Ceramic - Type 17 - Coarse Threads - 100qty

  • Features

    • Remains resistent to corrosion for appoximately twice as long as do dacrotized steel deck screws.
    • Ceramic Polymer Coating Protects Against Corrosion, Good wear resistance and can be used in pressure treated lumber, Excellent resistance to UV radiation, Flat Head With Nibs, Combo Square-Phillips Drive
    • Bugle Head with Square & Phillips Drive
    • Steel Ceramic Coated
    • 8 Diameter, 15/8" Length

  • Additional Notes

    • Other sizes and quantities available by request | In the abscence of a single industry standard for Bugle Heads, these dimensions are offered as a guide; slight deviations are acceptable. | In the abscence of a single industry standard for Deck Screws, these dimensions are offered as a guide; slight deviations are acceptable. | There is no single standard for deck screw dimensions. These values are offered as a guide; deviations from these specifications may occur.

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Drive Type:
Square/Phillips
Driver Size:
#2
Fastener Head Height:
0.020 - 0.039 in.
Fastener Head Type:
Bugle
Fastener Head Width:
0.315 - 0.363 in.
Fastener Length:
1/5/08
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Bugle_Hd_Sq_Phil_Type_17_Coarse_Thrd_Deck_Scr.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Phillips Recess Depth:
0.124
Phillips Recess Diameter:
0.176 - 0.201
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.68 lbs
Product Width:
3 in
Screw Point Type:
Type 17
Square Recess Depth:
0.064 - 0.075
Square Recess Width:
0.110 - 0.113
Sub Division:
Electrical-E H2
Thread Per Inch:
8 to 10
Thread Spacing:
Coarse
Thread Type:
UNC
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Deck Screw
Type2:
Deck Screw
Series:
CPD
Product Finish:
Ceramic Polymer Coating
Product Details:
Deck Screw
Product Material:
Steel Ceramic

Metallics JCPD1 – Frequently Asked Questions

1) Can the Metallics JCPD1 deck screw be used in pressure treated lumber?
Yes. The JCPD1 carries a ceramic polymer coating that is rated for use in pressure treated lumber, and Metallics states it resists corrosion roughly twice as long as a dacrotized steel deck screw. It also holds up to UV exposure, which matters on open decks and exterior framing.
2) Do I need to pre-drill with these #8 deck screws, or will they split the board?
The JCPD1 has a Type 17 point, which is the auger-style cutting tip that clears a channel as it drives. That is what lets a coarse thread deck screw start near a board end without pre-drilling and reduces splitting in dense or treated stock. Thread is coarse UNC at 8 to 10 threads per inch for fast pull-down into wood.
3) Are these deck screws Buy American or ARRA compliant for a government job?
No. The JCPD1 is not Buy American compliant and is not ARRA compliant; country of origin is listed as multiple. If your project carries a domestic sourcing requirement, this screw will not satisfy it.
4) What driver bit do I need for the JCPD1 square and Phillips deck screw?
A #2 bit. The head takes a combination square/Phillips recess, so either a #2 square (Robertson) or a #2 Phillips bit drives it. The square recess runs 0.110 to 0.113 inch wide and 0.064 to 0.075 inch deep; the Phillips recess is 0.176 to 0.201 inch diameter at 0.124 inch deep. Crews that already run square drive on decking can keep the same bit.
5) Will a bugle head sit flush in decking, or does it leave the head proud?
Bugle heads are made to self-countersink into wood so the top finishes flush with the surface, which is why they are the standard choice for decking and face-fastened trim. On the JCPD1 the head measures 0.315 to 0.363 inch across with a head height of 0.020 to 0.039 inch. In hardwood or composite, ease off the trigger at the end of the drive so you do not blow past flush.
6) How do Metallics JCPD1 deck screws come packaged and what is the minimum order?
They ship in a jar of 100, and 100 is the order minimum. Jar weight is listed at 0.68 lbs. Handy for a service van or an MRO crib where you want a sealed container rather than a loose bulk box.
7) Should I expect the head dimensions on these bugle head screws to match another brand exactly?
Not exactly. There is no single industry standard for bugle heads or for deck screw dimensions, so Metallics publishes the JCPD1 figures as a guide and slight deviations are acceptable. If you are mixing brands on one visible deck surface, buy one brand for the whole field so the countersinks look consistent.
How fast can I get the Metallics JCPD1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JCPD1 come with a warranty?
Absolutely. The Metallics JCPD1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JCPD1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JCPD1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!