Metallics JTEK2PV 8 x 3/4 in. ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.19
$0.19
Metallics JTEK2PV 8 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty

Metallics JTEK2PV 8 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JTEK2PV
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.19
$0.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
8 x 3/4 in. Pan Head Phillips Self-Drilling & Tapping Screws - #2 Drill Point - Steel Zinc - 500qty

  • Additional Notes

    • Other sizes and quantities available by request | SAE J78 does not include Specifications for #7 diameter drill screws. | This table is only a guide and does not constitute a warranty of any type.

  • Features

    • Pan Head with Phillips Drive
    • #2 Drill Point
    • 8 Diameter, 3/4" Length
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
500 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ASME B18.6.3-2010
Division:
Electrical H1
Drill Point Size:
#2
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Color:
Silver
Fastener Head Height:
0.105 - 0.115 in.
Fastener Head Type:
Pan
Fastener Head Width:
0.306 - 0.322 in.
Fastener Length:
4-Mar
Hardness:
Rockwell C32-40
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Hd_Phil_Self-Drill_TS_Steel_and_SS.pdf
Order Minimum Imperial:
500
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Panel Thickness:
0.035 - 0.100 IN
Phillips Recess Diameter:
0.175
Product Group:
Fasteners
Product Height:
2.7 in
Product Length:
3 in
Product Weight:
2.35 lbs
Product Width:
3 in
Recess Penetration Gaging Depth:
0.071 - 0.097
Screw Point Type:
Drill Point
Sub Division:
Electrical-E H2
Thread Per Inch:
18
Thread Standard:
SAE J78 - 2013
Thread Type:
UNC
Torsional Strength:
42 lb-in minimum
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Type BSD Self-Drilling & Tapping Screw
Type2:
Type BSD Self-Drilling & Tapping Screw
Series:
JTEK
Product Finish:
Zinc
Product Details:
Type BSD Self-Drilling & Tapping Screw
Product Material:
Steel Zinc

Metallics JTEK2PV – Frequently Asked Questions

1) Do I need to pre-drill a pilot hole for the Metallics JTEK2PV screw?
No. It's a Type BSD self-drilling and tapping screw with a drill point, so it cuts its own hole and forms its own thread in one pass within the 0.035 to 0.100 in. panel range. One driver, no pilot, no tapping step.
2) What driver bit do I need for these Metallics pan head Phillips self-drilling screws?
A #2 Phillips bit. The recess is a Phillips with a 0.175 in. recess diameter and a gaging depth of 0.071 to 0.097 in., so a #2 seats fully. A #1 will cam out and chew the recess; a #3 will not bottom.
3) How much does the pan head on these #8 screws stick up, and will it clear a flush-mounted plate?
Head height runs 0.105 to 0.115 in. with a head width of 0.306 to 0.322 in. That is a low-profile pan, so it clears most cover plates and trim, but it is not flush. If you need the head buried, you want a flat or trim head instead.
4) How many Metallics JTEK2PV screws come in a pack, and how are they packaged?
They ship 500 per jar, which is the order minimum. Total packed weight is 2.35 lbs.
5) Are these zinc self-drilling screws OK for outdoor or damp locations?
The JTEK2PV is steel with a zinc finish, which is a dry-interior corrosion coating. It's fine inside enclosures, panels, studs and drop ceilings. For exterior, wet, coastal or washdown work, specify a stainless self-drilling screw rather than zinc-plated steel.
6) Will these Metallics screws meet a Buy American or ARRA requirement on a federal job?
Both the ARRA Compliant and Buy American Compliant flags on the JTEK2PV read C, compliant. Country of origin is listed as multiple, so if your spec requires documented single-source origin, request the mill paperwork for the lot you receive.
7) What standards and thread spec do these #8 self-drilling tapping screws meet?
Thread is 18 threads per inch, UNC, built to SAE J78 - 2013, with head dimensions to ASME B18.6.3-2010. Note that SAE J78 does not cover #7 diameter drill screws, so a submittal calling for #7 will not reference this standard.
8) Will these screws snap in an impact driver or a high-torque screw gun?
Torsional strength is 42 lb-in minimum, with case hardness at Rockwell C32-40. That's standard for a #8 drill screw. Run a screw gun with the clutch set, or an impact driver at low speed, and back off once the head seats, since overdriving past seat is what shears these.
How fast can I get the Metallics JTEK2PV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTEK2PV come with a warranty?
Absolutely. The Metallics JTEK2PV is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTEK2PV?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTEK2PV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!