ABUS K925 Safety Lockout Tagout Personal Electrical Toolbox Kit

The K925 electrical toolbox kit ships with three 74/40 padlocks, three 1 inch hasps, three breaker lockouts, one large plug lockout, one small plug lockout, one gate valve lockout sized for 1 inch to 2-1/2 inch valves, ten tags, ten ties, and the lockout toolbox itself. It covers one electrician working on breakers, cord-and-plug equipment, and small valves without buying pieces separately.

Yes. The gate valve lockout included covers handwheel valves from 1 inch through 2-1/2 inch. A 2 inch valve falls inside that range. Anything above 2-1/2 inch needs a larger-diameter valve cover ordered on its own.

It's built as a personal kit. With three padlocks and three hasps in the box, it suits one authorized worker locking out up to three energy points, or a small job where one electrician needs redundancy. For a crew where every worker applies their own lock to a single point, you'd add padlocks beyond what the kit carries, since the three 1 inch hasps each accept multiple locks but the kit only supplies three.

Yes, that's what the two plug lockouts are for. The kit has one large and one small plug lockout, so you can capture the plug end of a cord-and-plug tool or machine rather than working at the panel. If the point of isolation is the breaker instead, the three breaker lockouts in the kit handle that.

The three hasps are 1 inch scissor-style lockout hasps, which is the standard group-lockout device: one hasp goes on the isolation point and each authorized worker hangs his own padlock in the openings, so the point cannot be re-energized until the last lock comes off. The 1 inch jaw sets what it will close around.

The tags are unrippable vinyl with a matte surface made to hold up to moisture, so a wet mechanical room or an outdoor panel won't pulp them the way card stock tags do. The matte face is what lets you write on them legibly. Ten tags and ten ties are included.

The K925 is classed as commercial. It's the kind of kit an MRO or facilities group issues to electricians and maintenance techs for energy isolation on breakers, plug-connected equipment, and valves across a plant, hospital, or campus.

The kit's plastic components, including the lockout toolbox, are recycled plastic made in the USA. That matters if you are buying to a recycled-content or domestic-sourcing requirement on a government, education, or healthcare procurement.