ACSI ED5800-W036 Corbin Russwi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3,817.00
$3,431.20
ACSI ACSI ED5800-W036 Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device with Electric Latch Retraction, 24 Volt AC/DC ACSI-ED5800-W036

ACSI ED5800-W036 Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device with Electric Latch Retraction, 24 Volt AC/DC

(No reviews yet) Write a Review

Model: ACSI-ED5800-613-RHR-W036-1550K
From the 1500 Series Collection
$3,817.00
$3,431.20
Selected Finish is
Selected Handing is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3,817.00
$3,431.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ACSI ED5800-W036 CORBIN RUSSWIN ED5000 PUSHPAD SERIES CONCEALED VERTICAL ROD EXIT DEVICE WITH ELECTRIC LATCH RETRACTION, 24 VOLT AC/DC OVERVIEW

ED5800-W036 Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device with Electric Latch Retraction, 24 Volt AC/DC.

Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device with Electric Latch Retraction, 24 Volt AC/DC, 36"" Door Width, Handed.

Buy the ACSI ED5800-W036 Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device with Electric Latch Retraction, 24 Volt AC/DC for easy installation and dependable door hardware solution.

ACSI-ED5800-W036 ELECTRIC MOTOR LATCH RETRACTION AVAILABLE CONFIGURATION

ACSI ED5800-W036 Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device with Electric Latch Retraction, 24 Volt AC/DC
ACSI ED5800-613-LHR-W036-1550K Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device Left Hand Reversible 613 - Satin Bronze Oil-Rubbed
ACSI ED5800-613-RHR-W036-1550K Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device Right Hand Reversible 613 - Satin Bronze Oil-Rubbed
ACSI ED5800-630-LHR-W036-1550K Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device Left Hand Reversible 630 - Satin Stainless
ACSI ED5800-630-RHR-W036-1550K Corbin Russwin ED5000 Pushpad Series Concealed Vertical Rod Exit Device Right Hand Reversible 630 - Satin Stainless

Product Specs

Series:
1500 Series
Collection:
1500 Series
Product Type:
Exit Device Trim
Features:
Device is Handed But Easily Field Reversible
Subcategory:
Electric Motor Latch Retraction
Latch Throw:
Top: 3/4"; Bottom: 5/8"
ANSI/BHMA:
ANSI A156.3, Type 8, Grade 1, ANSI A117.1, California State Fire Marshal pursuant to section 13144.1, NFPA 101 Life Safety Code
Commercial/Residential:
Commercial
Product Group:
Exit Devices and Trim
Product Subgroup:
Exit Devices - Vertical Rod
Electronic:
Yes
Grade:
Grade 1
Stile Type:
Wide Stile
Product Size:
36
Dogging Configuration:
Hex Key Dogging
Product Category:
Exit Devices and Trim
Department:
Door Hardware

ACSI ACSI-ED5800-613-RHR-W036-1550K – Frequently Asked Questions

1) Will a concealed vertical rod exit device work on a pair of doors with no center mullion?
Yes. The ACSI ED5800-W036 is a concealed vertical rod device, so it latches at the head and at the threshold rather than into a strike on a mullion. That is the reason to pick it over a rim device on a pair: a rim device latches into the frame or into a removable mullion, so on a mullion-free pair you either add something like the Detex 90 Series keyed removable mullion or go vertical rod. Latch throw is 3/4 inch at the top and 5/8 inch at the bottom.
2) Is the ACSI ED5800 handed, and do I have to order left or right hand?
Handed, yes, but reversible in the field. Order it left hand or right hand, and if the opening turns out to be the other way the device can be reversed on site without a different part number. Both handings are offered in 613 oil rubbed bronze and 630 satin stainless steel.
3) What door width does the ED5800-W036 exit device cover?
The W036 suffix is the 36 inch door width. If your leaf is a different width, that suffix is the thing to change on the order, not the base model.
4) Does this exit device meet Grade 1 and life safety code for an institutional egress door?
It is ANSI A156.3, Type 8, Grade 1, and carries ANSI A117.1, California State Fire Marshal listing pursuant to section 13144.1, and NFPA 101 Life Safety Code. That covers the specification language most school, healthcare, and government egress schedules are written to.
5) What power supply do I need for the electric latch retraction on the ED5800?
It is a 24 volt AC/DC motorized latch retraction device, so the power supply feeding it has to be 24V. Motor retraction draws an inrush at the moment it pulls the latches, which is why these are normally run off a supply sized for latch retraction rather than a general purpose 24V transformer.
6) Will the ED5800 latch into the strikes already in my frame and threshold?
Top latch throws 3/4 inch, bottom throws 5/8 inch. If your existing top strike pocket and floor strike were cut for a vertical rod device with those throws, it drops in; if the door was previously on a rim device there is no top or bottom strike to reuse and both have to be prepped. The concealed rods also mean the door leaf itself must be prepped for rods, so this is not a swap onto a door that only ever carried a surface device.
7) What is the closest Corbin Russwin trim option if the opening needs key-only access instead of an electrified device?
The Corbin Russwin K157ET is a Grade 1 key only trim with rose, built for ED2200 and ED2400 series exit devices in a heavy duty classroom function. It is trim for a mechanical device rather than an electrified concealed vertical rod unit, so it serves an opening where access is controlled by a cylinder at the door rather than by a 24 volt latch retraction signal from an access control system. The ED5800-W036 is Grade 1 as well and carries hex key dogging for times when the door needs to stay pushed open.
8) What electronic trim is available if the door needs standalone keypad access rather than wired power?
Two keypad options cover that. The BEST EXZ EZ Series electronic keypad exit device trim includes a key override function, and the Dormakaba E-Plex E5010 is a Grade 1 electronic push button lever trim with key override that fits doors 1-3/8 inch to 2-1/4 inch thick. Both put the credential at the door itself, where the ED5800-W036 takes a 24 volt AC/DC signal for electric latch retraction and needs power run to the opening and a control source to release it.
9) What keyless mechanical trim works on a panic device when no power or wiring is going to the door?
The Lockey 115P is a heavy duty keyless passage lever panic trim supplied with a 1150 lock body, and the Lockey 285P is a keyless mechanical panic trim with a lever handle. Both fit doors 1 3/16 inch to 2 inch thick and use a mechanical pushbutton combination, so no conduit, transformer, or access control panel is involved. The ED5800-W036 is an electrified device operating on 24 volt AC/DC, so the opening has to be powered.
10) Is a blank plate or blank escutcheon trim a substitute for a vertical rod exit device?
No. The Sargent 802 is a blank plate trim in the PE80 Series with GTB design, Grade 1, and the Von Duprin 379L-BE is a Grade 1 heavy duty blank escutcheon for 55 Series rim exit devices. The Detex 03WS is a trim plate with a cylinder hole for 10, 20, 21 and 27 Series. All three are the outside plate only - they cover the through-bolt prep and provide no outside entry - and they mount to a device that already exists on the door. The ED5800-W036 is the complete concealed vertical rod device itself, latching top and bottom with a 3/4 inch top throw and 5/8 inch bottom throw. Note the Sargent 802 is not compatible with wood doors.
11) How do you secure a pair of doors without concealed vertical rods?
A keyed removable mullion is the usual alternative. The Detex 90KR is a 90 Series keyed removable mullion for rim exit devices - it puts a vertical post between the two leaves so each leaf can carry a rim device, and it lifts out when the full clear opening is needed. The ED5800-W036 takes the other route, latching into the head and sill through concealed rods with a 3/4 inch top throw and 5/8 inch bottom throw, so the floor and frame conditions have to accept the strikes.
12) Can I hold this exit device unlocked during business hours without powering it?
Yes, it has hex key dogging. Dog the pushpad down with the hex wrench and the door stays push-pull open with no power involved. The electric latch retraction is the separate path, for access control release or a card reader tie-in. Note that hex dogging is the non fire rated arrangement; a fire rated opening cannot be dogged.
13) Is this the same device as a Corbin Russwin ED5000, or an aftermarket copy?
It is the Corbin Russwin ED5000 pushpad series device, supplied by ACSI with their electric motor latch retraction built in. So the mechanical device, trim interface, and pushpad are ED5000; the electrification is the ACSI part. If your existing openings are standardized on ED5000 pushpads, this matches them.
14) Can I use Corbin Russwin ED7000 or ED2200 lever trim on this ED5000 device?
No. Trim is tied to the device series it was built for. The Corbin Russwin x650ET dummy lever trim is for ED7000 series devices, and the K157ET key only trim is for ED2200 and ED2400 devices. Neither is an ED5000 trim. For an ED5000 pushpad device, specify trim built for the ED5000 chassis.
15) What are my options if I want keypad or keyless entry on the outside of an exit device instead of electric latch retraction?
Electric latch retraction unlocks the whole device from a remote signal, which is what you want for access control, fire alarm release, or an automatic operator. If instead you just want people to punch a code at the door, that is standalone trim: the BEST EXZ EZ Series electronic keypad exit device trim with key override, the Dormakaba E-Plex E5010 push button trim with key override (1-3/8 to 2-1/4 inch doors), or the Lockey 285P keyless mechanical panic trim (1 3/16 to 2 inch doors) for a no-power mechanical code. Those trims mount to a mechanical device and need no wiring.
16) Does the ED5800 include outside trim, or do I order that separately?
Order the outside trim separately and match it to the function the opening needs. Common choices across the trades: classroom function lever trim, storeroom function like the Deltana DDS-36, passage function like the Deltana LTED80LP for a door that is never locked from outside, a night latch pull like the Sargent 814 PSB, or a blank plate such as the Sargent 802 or the Von Duprin 379L-BE where the door is exit only. Exit only is common with latch retraction devices, since entry is granted by the access control system rather than by a key.
17) Why pick concealed vertical rod over surface vertical rod on an exit door?
Concealed rods run inside the door leaf, so nothing is exposed to be kicked, grabbed, or vandalized, and the door face stays clean. The trade is prep: the leaf has to be built or machined for concealed rods, and service means opening the door up. Surface vertical rod mounts on the face and retrofits an unprepped door. Choose concealed on new leaves and in high traffic or public corridors; choose surface when you are retrofitting a door that was never prepped.
18) Will an exit device trim work on a narrow stile aluminum door?
Check the stile before ordering. The ED5800-W036 is built for wide stile doors at 36 inch door width and is handed but easily field reversible, offered left hand and right hand in 613 oil rubbed bronze and 630 satin stainless steel. Among the trims, the Sargent 802 blank plate is not compatible with wood doors, and the Dormakaba E-Plex E5010 covers doors 1-3/8 inch to 2-1/4 inch thick while the Arrow SRX87 is built for 1-3/4 inch doors. Those thickness and material limits decide the fit as much as the function does.
19) Which lever trim matches a storeroom function on an exit device?
The Deltana DDS-36 is a storeroom function lever trim for Exit Device 80, and the Deltana LTED60LST is a storeroom function lever trim for Exit Device 60 - the difference between them is which device family they mount to. For passage, the Deltana LTED80LP is a passage lever trim for Exit Device 80, and for entry the LTED80LS covers that function on the same device 80. All four are mechanical lever trims, a different approach from the ED5800-W036, where the latches are retracted electrically on a signal.
20) What trim should be specified for a classroom opening on an exit device?
The Arrow SRX87 is a classroom function exit device trim with a Sierra lever and rose for the S1150, S1250, ED910 and PEC910 Series, sized for 1-3/4 inch doors. The Detex 08BN is a classroom S-lever trim with a mortise cylinder for the Value Series. Both key the outside lever for classroom control. The ED5800-W036 handles classroom-style control differently: access is granted by the 24 volt latch retraction signal, and the device carries hex key dogging for periods when the door should stay free.
21) What pull trim options exist for an exit device instead of a lever?
Three pulls cover different needs. The Sargent 814 PSB is a heavy duty nightlatch pull trim in the 80 Series, where the pull retracts the latch when the cylinder is turned. The Sargent 862 is a Grade 1 offset pull handle in the P800 Series, a pull with no latch control. The Detex 0A straight pull trim comes with a blank escutcheon for A/AN Series Value Series devices. Pulls suit an opening where the outside is a dummy or key-controlled face; the ED5800-W036 instead releases its top and bottom latches electrically.
22) For a facility standardizing on Grade 1 exit hardware, which comparable devices carry that rating?
The ED5800-W036 meets ANSI A156.3, Type 8, Grade 1, along with ANSI A117.1, California State Fire Marshal pursuant to section 13144.1, and NFPA 101 Life Safety Code. Among the trims, the Corbin Russwin K157ET, the Corbin Russwin x650ET, the Dormakaba E-Plex E5010, the Sargent 802, the Sargent 862 and the Von Duprin 379L-BE are all Grade 1, so a facility standard written to Grade 1 can be held across the device and its trim families.
23) What finishes does the ED5800 come in, and will it match the rest of my building?
Two finishes: 613 oil rubbed bronze and 630 satin stainless steel, each available left hand or right hand. 630 is the usual match for a commercial building already running satin stainless lever and exit hardware; 613 suits dark bronze openings. There is no painted or brass option on this device, so if the rest of the floor is 605 or 626 you will have a visible difference.
24) Is this exit device rated for a commercial or institutional building, or is it light duty?
Commercial, and Grade 1, the heaviest ANSI grade. It is built to ANSI A156.3 Type 8 Grade 1, which is the level specified for schools, hospitals, government buildings, and high traffic multi-family egress. It is not a residential device.
How fast can I get the ACSI ACSI-ED5800-613-RHR-W036-1550K delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ACSI ACSI-ED5800-613-RHR-W036-1550K come with a warranty?
Absolutely. The ACSI ACSI-ED5800-613-RHR-W036-1550K is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ACSI ACSI-ED5800-613-RHR-W036-1550K?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ACSI ACSI-ED5800-613-RHR-W036-1550K from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!