ACSI K-131 Request To Exit Swi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$90.00
$85.07
ACSI ACSI K-131 Request To Exit Switch Kit for Falcon 1690, 1790 Series ACSI-K-131

ACSI K-131 Request To Exit Switch Kit for Falcon 1690, 1790 Series

(No reviews yet) Write a Review

Model: K-131
From the 1500 Series Collection

In Stock (leaves warehouse same day if ordered before 3pm ET)

$90.00
$85.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

ACSI K-131 REQUEST TO EXIT SWITCH KIT FOR FALCON 1690, 1790 SERIES OVERVIEW

  • K-131 Request To Exit Switch Kit for Falcon 1690, 1790 Series. ACSI Series K Switch Kits are field installed in exit devices. Series K Switch Kits include a SPDT (Single Pole Double Throw) switch assembly with long wire leads and easy-to-follow installation instructions. K Switch Kits may be used to:
  • Provide instant release of magnetic locks for free egress.
  • Activate a door alarm.
  • Signal a control console when the push bar of an exit device is depressed.
  • Shunt a door alarm to allow free egress.
  • Buy the ACSI K-131 Switch Kit for Falcon 1690, 1790 Series for easy installation and dependable door hardware solution.

ACSI K-131 REQUEST TO EXIT SWITCH KIT FOR FALCON 1690, 1790 SERIES PRODUCT FEATURES

  • Function: Part/Component
  • Product Type: Access Control Part/Accessory
  • ADA Compliant: No
  • Contact Ratings: 3A @ 125VAC; 2A @ 30VDC
  • Function Family: Part/Component
  • Features: SPDT Monitor Switch; Authorized Egress
  • For Use With: Falcon 1690 and 1790 Series; First Choice 3600 and 3700 Series
  • Manufacturer Parent: ACSI
  • Sub-Series: K-131

ACSI ELECTRIC EXIT DEVICE SWITCH KITS COLLECTION

  • ACSI ACSI K-100 Request To Exit Switch Kit for Von Duprin 33A, 35A, 98, 99 Series
    ACSI K-200 Request To Exit Switch Kit for Von Duprin 33A, 35A, 98, 99 DPDT Series
    ACSI K-101 Request To Exit Switch Kit for Von Duprin 55 Series
    ACSI K-102 Request To Exit Switch Kit for Von Duprin 88 Series
    ACSI K-103 Request To Exit Switch Kit for Sargent 80 Series Series
    ACSI K-203 Request To Exit Switch Kit for Sargent 80 Series DPDT Series
    ACSI K-104 Request To Exit Switch Kit for Sargent 9600, 9700, 9800, 9900 Series
    ACSI K-105 Request To Exit Switch Kit for Sargent 9300, 9400, 9500 Series
    ACSI K-106 Request To Exit Switch Kit for Adams Rite 8000, 3000 Series
    ACSI K-107 Request To Exit Switch Kit for Corbin Russwin 8000 and Yale 2100 Series
    ACSI K-108 Request To Exit Switch Kit for Jackson 1085, 1095 Series
    ACSI K-109 Request To Exit Switch Kit for Yale 7000 and Corbin Russwin ED4000, ED5000 Series
    ACSI K-110 Request To Exit Switch Kit for Monarch 18, 19 Series
    ACSI K-111 Request To Exit Switch Kit for Doromatic 990, 1090 Series
    ACSI K-112 Request To Exit Switch Kit for Doromatic 1490, 1590 Series
    ACSI K-124 Request To Exit Switch Kit for Precision 2000 Series Series
    ACSI K-125 Request To Exit Switch Kit for Dorma 9000 Series
    ACSI K-126 Request To Exit Switch Kit for Hager 4500, 4600 and PDQ 6200 and Stanley Commercial QED100, 200, 300 Series
    ACSI K-226 Request To Exit Switch Kit for Hager 4500, 4600 and PDQ 6200 and Stanley Commercial QED100, 200, 300 DPDT Series
    ACSI K-128 Request To Exit Switch Kit for Design 1000 Series
    ACSI K-129 Request To Exit Switch Kit for Falcon 24, 25 Series
    ACSI K-130 Request To Exit Switch Kit for Jackson 20 Series
    ACSI K-131 Request To Exit Switch Kit for Falcon 1690, 1790 Series
    ACSI K-123 Latch Bolt Monitor Switch Kit for Von Duprin 33A, 35A, 98, 99 Series
    ACSI K-127 Latch Bolt Monitor Switch for ACSI 1500K-VD ELR Kit on Von Duprin 33A, 35A. 98, 99 Series

Product Specs

Subcategory:
Electric Exit Device Switch Kits
Series:
1500 Series
Collection:
1500 Series
Product Type:
Exit Device Field Install Kits
Compatibility:
Falcon 1690, 1790 Series
Commercial/Residential:
Commercial
Electronic:
Yes
Lock Function:
Part/Component
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Parts and Accessories Type:
Installation Accessories
Product Attribute:
Parts and Accessories
Product Function:
Part/Component
Fire Rating:
No
Product Category:
Electronic Access Control
Department:
Door Hardware

ACSI K-131 – Frequently Asked Questions

1) Will the ACSI K-131 switch kit work in a Falcon 1690 exit device?
Yes. The K-131 request-to-exit switch kit is built for Falcon 1690 and 1790 Series exit devices, and it also fits First Choice 3600 and 3700 Series devices. It's a field-installed kit, so it goes into a device that's already hung on the door rather than requiring a factory-ordered electrified device.
2) What kind of switch is in the ACSI K-131 kit, and what can I wire it to?
The K-131 carries a single SPDT (single pole double throw) switch assembly with long wire leads. Because it's double throw you get both a normally open and a normally closed contact off one switch, so it can drop a mag lock for free egress, shunt or trip a door alarm, or send a signal to a control console when the push bar is pushed. If your design needs two independent circuits switched at once, this kit won't do it, ACSI builds separate DPDT versions (the K-200, K-203 and K-226) for other device families.
3) Can the K-131 request-to-exit switch handle a 24VDC mag lock circuit directly?
The switch is rated 3A at 125VAC and 2A at 30VDC, so a 24VDC mag lock drawing well under 2 amps can be switched directly through it. Anything above those ratings, or a higher-voltage load, needs to go through a relay with the K-131 driving the relay coil instead.
4) Do I need to buy a new electrified exit device, or can I add request-to-exit to the Falcon device already on the door?
You can add it to the device you already have. The Series K kits are field installed into an existing exit device and ship with installation instructions, so a Falcon 1690 or 1790 that's already mounted gets its RX signal without pulling the device and reordering it electrified. That's the usual retrofit path when a mag lock or an access control head end is added to an opening after the fact.
5) Is the K-131 switch kit approved for use on a fire-rated exit device?
No fire rating is carried on the K-131 kit, and it is not ADA compliant as a component. Treat it as a commercial electronic accessory: on a labeled opening, the fire rating rides with the exit device and the door assembly, and any field modification to a labeled device has to stay within what the device manufacturer permits.
6) Does the K-131 monitor whether the latch bolt is actually secured, or only that the push bar was pressed?
Only the push bar. The K-131 signals when the push bar of the exit device is depressed, which is what an access control panel needs for authorized egress and mag lock release. For latch bolt position monitoring, that's a different part in the ACSI line: the K-123 latch bolt monitor switch kit for Von Duprin 33A, 35A, 98 and 99, and the K-127 latch bolt monitor for the ACSI 1500K-VD ELR kit on those same devices.
7) I'm standardizing request-to-exit across a building with mixed exit device brands. Can I use one ACSI kit everywhere?
No, you order by device family, but you can standardize on the ACSI Series K line and keep the same SPDT switch behavior and wiring throughout. Falcon 1690/1790 openings take the K-131, Falcon 24/25 the K-129, Von Duprin 33A/35A/98/99 the K-100, Von Duprin 55 the K-101, Von Duprin 88 the K-102, Sargent 9300/9400/9500 the K-105, Yale 7000 and Corbin Russwin ED4000/ED5000 the K-109, Precision 2000 the K-124, Dorma 9000 the K-125, and Hager 4500/4600 with PDQ 6200 and Stanley QED100/200/300 the K-126. Walk the doors, list the device series, then pick the kit per series.
How fast can I get the ACSI K-131 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ACSI K-131 come with a warranty?
Absolutely. The ACSI K-131 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ACSI K-131?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the ACSI K-131 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!