Adams Rite 4066 - Thumbturm C...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$53.00
$29.62
Brand:
Adams Rite
Category:
Parts and Accessories
Product Group:
Parts and Accessories
Model:
4804
Subcategory:
Cylinder and Accessories
Product Subgroup:
Cylinders
Product Type:
Cylinders
Commercial/Residential:
Commercial
Keyed:
No
Keyed Function:
Non-Keyed

Model: 4066-01-130

Adams Rite 4066 - Thumbturm Cylinder for Deadlocks or Deadlatches, Non-Keyed

(No reviews yet) Write a Review
$53.00
$29.62
Selected Finish is
Adding to cart… The item has been added
FREE SHIPPING for orders over $149
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
FREE KEYING services available on all locks
Brand:
Adams Rite
Category:
Parts and Accessories
Product Group:
Parts and Accessories
Model:
4804
Subcategory:
Cylinder and Accessories
Product Subgroup:
Cylinders
Product Type:
Cylinders
Commercial/Residential:
Commercial
Keyed:
No
Keyed Function:
Non-Keyed

4066 THUMBTURN

The 4066 Thumbturn operates deadlocks or deadlatches without a key.

FUNCTION

4066: To operate deadlock or deadlatch without key. Interchanges with standard1" [25.4 mm] length, 1-5/32" [29.4 mm] diameter mortise cylinder. Cams are available to suit the particular Adams Rite deadlock or deadlatch. See next page for cam specifications.

FEATURES

ShellChoice of three finishes: 130 to match 628 Clear anodized, 313 Dark bronze anodized, 335 Black anodized.

Trim Ring: Furnished. 1/4" [6.4 mm] thick, suitable for 1-3/4" [44.5 mm] thick doors. Available by special order for other door thicknesses.

Shipping Weight: 1/2 lb [0.23kg]

CYLINDERS BY OTHERS

Adams Rite deadlocks and deadlatches are designed to accept standard 1" [25.4 mm] length, 1-5/32" [29.4 mm] diameter mortise cylinders of all popular makes. This means that the entrance can be keyed to match the system used throughout the building on other types of doors. Care must be taken, however, to specify the proper cam for each type of lock, as these are not generally interchangeable. The cam shapes shown are available from the listed cylinder manufacturers and will be supplied by them with the cylinder when specified or available separately. Because of variations in the attachment of cams to cylinders and other construction differences, it is advisable to NOT attempt using one manufacturer's cylinder with another manufacturer's cam.

DOCUMENTS

 

4036, 4066 Catalog Page

4036_4066 Cam Dimensions Document