You may also like
AL SLOTTED COMP TERM 3/0 BLK 1SLOT
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- Mexico (MX)
- Insulation Material:
- None
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Terminal Lug Slotted Tang
- Selling Unit Of Measure:
- each
- Surface Finishing:
- Bare
- Type2:
- Wire connectors
- Wire Size:
- 3/0 STR AWG4/0 SOL AWG
- Department:
- Electrical
- Product Subgroup:
- Connectors
Blackburn LAC30 – Frequently Asked Questions
1) What wire size does the Blackburn LAC30 compression lug take?
The LAC30 is sized for 3/0 AWG stranded conductor, and 4/0 AWG solid. If your cable is a different size, you need a different lug in the series, because a compression lug only crimps correctly on the conductor size it is rated for.
2) How many bolt slots does the LAC30 lug have, and what does that mean for my landing pad?
One slot. The LAC30 is a single-slot slotted tang lug, so it lands on a single bolt or stud. The slot (rather than a round hole) gives you some slide to line up with existing bus or breaker pad spacing, but if your pad requires two-hole mounting for anti-rotation, you need a two-hole lug instead.
3) Does the LAC30 need a crimp tool, or can it be tightened with a wrench?
It is a compression lug, so it must be crimped with a die-type compression tool, not set with a setscrew or wrench. Mechanical lugs with setscrews are the alternative if you do not have a crimper on site; compression terminations are what most commercial specs call for on feeder conductors.
4) Can I use the Blackburn LAC30 lug on copper wire, or is it aluminum only?
The LAC30 is an aluminum-body lug. Blackburn lists it as an AL slotted compression terminal, so treat it as an aluminum connector and confirm your conductor material and any dual-rated requirement on the drawing before you crimp.
5) Is the Blackburn LAC30 insulated, or do I need to tape or boot it after crimping?
No insulation on this one. The LAC30 ships bare with no insulating sleeve, so in any application needing conductor coverage at the termination you add tape, heat shrink, or a separate boot yourself.
6) Is the Blackburn LAC30 sold individually or in a bag?
Sold each. Order one LAC30 per termination, so count your phases, neutral, and ground landings and buy accordingly rather than assuming a multi-pack.
7) Where is the Blackburn LAC30 lug made?
Mexico. That is the stated country of origin, which is the detail institutional and government buyers usually need for domestic-preference or Buy America documentation on a submittal.
How fast can I get the Blackburn LAC30 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn LAC30 come with a warranty?
Absolutely. The Blackburn LAC30 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn LAC30?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn LAC30 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.