You may also like
Anchors 1 x 12 Wdg St-zn (Box 5)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics TS112 – Frequently Asked Questions
1) What size hole do I drill for a 1 inch wedge anchor like the TS112?
A wedge anchor is drilled to its own nominal diameter, so the 1 inch TS112 goes into a 1 inch carbide bit hole in the concrete. Drill deeper than your intended embedment so debris has somewhere to go, clean the hole, then drive the anchor through the fixture until the threads are through and tighten the nut to expand the clip.
2) Can I use the Metallics TS112 anchor outdoors or in a damp area?
The TS112 is zinc plated steel, which is a mild corrosion coating suited to dry interior concrete and sheltered conditions. For exterior exposure, washdown areas, coastal sites, or anywhere standing moisture is expected, specify a stainless or hot dip galvanized wedge anchor instead.
3) Is a wedge anchor the right choice, or should I use a sleeve or epoxy anchor?
A wedge anchor like the TS112 is a mechanical expansion anchor for solid, uncracked poured concrete, and it is the usual pick for heavy structural attachments where you want immediate load with no cure time. In hollow block, brick, or grout filled CMU a sleeve anchor spreads the load better. For anchoring close to an edge, into cracked concrete, or where you need maximum pullout, an adhesive or epoxy anchor with threaded rod is the alternative.
4) Does the Metallics TS112 anchor come with nuts and washers?
Wedge anchors of this type ship as a complete assembly, with the expansion clip, nut, and washer already on the stud, so each of the five anchors in the box is ready to drive. You supply the 1 inch carbide drill bit, a hammer, and a wrench or socket to tighten.
How fast can I get the Metallics TS112 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS112 come with a warranty?
Absolutely. The Metallics TS112 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS112?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS112 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.