You may also like
Anchors 1 x 12 Wdg St-zn (Box 5)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics TS6712D – Frequently Asked Questions
1) Can I use the Metallics TS6712D wedge anchor in block or brick instead of poured concrete?
Wedge anchors are a solid-concrete fastener. They rely on a clip wedging against the wall of a drilled hole in dense, solid base material, so hollow block, brick with voids, and mortar joints are the wrong substrate. For hollow masonry use a sleeve anchor or a screen tube and threaded rod in epoxy instead.
2) What drill bit size do I need for a 1 inch wedge anchor like the TS6712D?
Wedge anchors are drilled with a carbide bit matching the anchor's nominal diameter, so a 1 inch anchor takes a 1 inch hole in a hammer drill. The hole is drilled deeper than the embedment so dust can clear, then the anchor is driven through the fixture into the hole and the nut tightened to expand the clip.
3) Is a zinc plated wedge anchor like the TS6712D OK for outdoor or wet locations?
Zinc plated carbon steel, which is what the TS6712D is, is a dry interior finish. It will corrode in exterior exposure, in washdown areas, or anywhere chlorides are present. For those installs step up to a stainless or hot dip galvanized wedge anchor of the same 1 inch diameter.
4) How many anchors come in a box of Metallics TS6712D?
Five anchors per box. That is a working quantity for a single heavy base plate or a short run of equipment mounts, so count your hole pattern before ordering a single box on a larger layout.
How fast can I get the Metallics TS6712D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS6712D come with a warranty?
Absolutely. The Metallics TS6712D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS6712D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS6712D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.