You may also like
Anchors 1/2" Hand Drive Pins St-zn (Jar 50)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JDPL1 – Frequently Asked Questions
1) What length are the Metallics JDPL1 pins?
Half an inch. That is a short pin, meant for thin items held tight to the substrate, like a one hole strap or a clip. If you are shimming, going through furring, or fastening anything with meaningful standoff, the 1/2 inch pin will not reach enough embedment and you want a longer drive pin or a screw anchor.
2) Do I need a powder actuated tool for Metallics JDPL1 pins?
No. These are hand drive pins, set with a hammer, so there is no powder tool, no cartridge and no operator certification involved. If your spec calls for a powder actuated fastening, this is not that product.
3) What are Metallics JDPL1 hand drive pins used for?
The JDPL1 is a 1/2 inch hand drive pin, a masonry anchor pin you set by hammer rather than by drilling and threading a fastener. Electrical trades use this size for tacking straps, clips and small boxes to concrete or block. It is sold under model number JDPL1.
4) How many Metallics JDPL1 drive pins come in a pack, and how are they packaged?
Fifty pins per jar. The jar pack keeps loose pins contained on a service truck or gang box, which is the usual reason a contractor buys this size in bulk rather than in a small card pack.
5) Are the JDPL1 drive pins steel, and are they coated against corrosion?
Steel with a zinc plating. That plating suits dry interior work such as conduit strap and box mounting; for wet, exterior or corrosive environments a stainless or hot dip anchor is the better call.
6) Is JDPL1 the part number to quote for these Metallics drive pins?
Yes. Metallics JDPL1 is the manufacturer part number, and it covers the 1/2 inch zinc plated steel hand drive pin supplied 50 to a jar. There is a single configuration, so there is no finish, length or pack option to specify on the order.
How fast can I get the Metallics JDPL1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDPL1 come with a warranty?
Absolutely. The Metallics JDPL1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDPL1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDPL1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.