Anchors 1/4 X 3/4 Hand Drv Pin St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JDP2 – Frequently Asked Questions
1) Will a 3/4 inch long drive pin anchor hold a conduit strap or box on concrete?
Yes, that is what the JDP2 is for. At 3/4 inch embedment it is a light duty fastener sized for one and two hole conduit straps, box mounting brackets, and similar light electrical attachments to concrete or block. For anything carrying real load or vibration, step up to a sleeve or wedge anchor instead.
2) Are Metallics JDP2 drive pin anchors zinc plated or stainless?
Steel with a zinc plating, not stainless. That suits dry interior work, mechanical rooms, and covered areas. For exterior or damp locations where corrosion is a concern, pick a stainless anchor.
3) Do I need a hammer drill and a setting tool to install these, or just a hammer?
Just a hammer for the anchor itself. The JDP2 is a hand drive pin anchor, meaning the pin is driven with a hammer to expand the body, so no powder charge or setting punch is required. You still need a masonry bit to drill the 1/4 inch hole.
4) How many anchors come in a jar of Metallics JDP2?
100 pieces per jar. The JDP2 ships in jar pack, which is the usual format electricians keep on the van for one-off strap and bracket mounting rather than a bulk box.
5) What is the Metallics part number for the 1/4 x 3/4 drive pin anchor?
Order it as JDP2. That is the Metallics manufacturer part number for the 1/4 by 3/4 inch zinc plated steel hand drive pin anchor in the 100 count jar.
6) Can drive pin anchors like these be removed and reused?
No. A hand drive pin anchor expands permanently when the pin is driven, so it is a one shot fastener. If you expect to take the fixture down and remount it, use a threaded anchor such as a machine screw anchor or a sleeve anchor you can back a bolt out of.
How fast can I get the Metallics JDP2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDP2 come with a warranty?
Absolutely. The Metallics JDP2 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDP2?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDP2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.