You may also like
Anchors 1/4 X 1-1/4 Hand Drv Pin St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JDP4 – Frequently Asked Questions
1) Can I use the Metallics JDP4 in drywall or hollow block?
No. A hand drive pin anchor needs solid base material, concrete, solid masonry, or brick, to grip as the pin expands the body. In drywall use a toggle or self drilling wall anchor; in hollow block cells, use a toggle or a sleeve type anchor that spans the void.
2) Is the JDP4 anchor rated for overhead or hanging electrical loads?
Hand drive pin anchors like the JDP4 are light duty fasteners for attaching straps, clips, conduit hangers, and boxes to concrete, block, or brick. They are a one shot, non removable fastener. For anything carrying real or overhead weight, use a wedge anchor or a screw anchor sized to the load instead.
3) Are JDP4 anchors corrosion resistant enough for a damp basement or parking garage?
The JDP4 is steel with a zinc plating, which handles interior and normally dry or damp conditions. Zinc plating is not a substitute for hot dip galvanizing or stainless in exterior, coastal, or chemically washed areas, so pick a stainless fastener for those.
4) How thick a fixture can I fasten with a 1-1/4 inch drive pin anchor?
Total length is 1-1/4 inches, and that length has to cover the thickness of what you are fastening plus the embedment in the concrete. For a thin conduit strap or box ear it leaves adequate embedment; if you are going through furring, a sleeper, or any standoff, step up to a longer anchor so you are not losing embedment to the fixture.
5) How many anchors come in a jar of Metallics JDP4?
Each jar holds 100 of the 1/4 x 1-1/4 hand drive pin anchors. The jar pack is handy on a service van since the anchors stay contained rather than loose in a bin, and 100 covers a full day of conduit strap or box mounting.
6) What part number do I order for the 1/4 x 1-1/4 Metallics drive pin anchor?
Order Metallics JDP4. That is the manufacturer part number for the 1/4 inch by 1-1/4 inch zinc plated hand drive pin anchor supplied in a 100 count jar.
How fast can I get the Metallics JDP4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JDP4 come with a warranty?
Absolutely. The Metallics JDP4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JDP4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JDP4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.