You may also like
Anchors 1/4 X 1-3/4 Wedge Ancr St-zn U (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics JTS1134D – Frequently Asked Questions
1) What size hole do I drill for the Metallics JTS1134D 1/4 inch wedge anchor?
Wedge anchors are drilled with a hole the same nominal diameter as the anchor, so the JTS1134D 1/4 x 1-3/4 inch anchor goes into a 1/4 inch hole drilled with a carbide bit in concrete. Drill the hole deeper than the anchor's embedment so dust can clear, blow it out, then drive the anchor through the fixture and tighten the nut to expand the clip.
2) Is the Metallics JTS1134D wedge anchor OK for outdoor or damp locations?
The JTS1134D is a carbon steel anchor with a zinc plated finish, which is intended for dry interior use. Zinc plating gives limited corrosion protection, so for exterior, wet, or washdown areas use a stainless steel wedge anchor instead.
3) Do I need to buy nuts and washers separately for these 1/4 inch wedge anchors?
No. A wedge anchor of this type ships as an assembly with its nut and washer already on the threaded stud, so the JTS1134D is ready to drive out of the jar. You supply the carbide drill bit, a blow-out bulb or vacuum, and a hammer.
4) Should I use a wedge anchor or a sleeve anchor for fastening into concrete?
Use a wedge anchor like the JTS1134D when you are going into solid, poured concrete and want the highest holding value for the diameter. Switch to a sleeve anchor when the base material is hollow block or brick, since a wedge anchor's single expansion clip needs solid material to bite into. For temporary or removable mounting, a machine screw anchor or a concrete screw is the better choice because a set wedge anchor cannot be backed out.
5) How many anchors come in a jar of Metallics JTS1134D?
Each jar holds 100 of the 1/4 x 1-3/4 inch zinc plated wedge anchors, nuts and washers assembled. The jar pack is what MRO and electrical stockrooms usually keep on the shelf for repeat strap and bracket work.
How fast can I get the Metallics JTS1134D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JTS1134D come with a warranty?
Absolutely. The Metallics JTS1134D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JTS1134D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JTS1134D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.