You may also like
Anchors 1/4 X 3-1/4 Hwh 5/16Hd Sl Blu St-zn (Box 1000)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics CSH50FM – Frequently Asked Questions
1) Do I need a separate anchor shield or plug with these, like a plastic sleeve anchor?
No sleeve, shield, or plug is used. A screw anchor like the CSH50FM taps its own thread directly into the drilled masonry hole, so you drill, blow or vacuum the hole clean, and drive the screw. That also means it can be removed and the fixture re-hung, which a wedge or sleeve anchor cannot.
2) How many anchors come in a box of Metallics CSH50FM?
They ship 1,000 per box. That is a bulk pack sized for electricians setting strut, conduit straps, and box hangers across a whole floor rather than a small job count.
3) Is the blue coating on the CSH50FM anchor suitable for damp or outdoor use?
The CSH50FM is steel with a blue zinc coating. Zinc plating handles interior and intermittently damp conditions; for permanently wet exterior work or anything near chlorides, step up to a stainless or mechanically galvanized anchor instead.
4) Hex washer head versus flat head concrete screw, which should I use for conduit strap and strut work?
The hex washer head on the CSH50FM drives with a 5/16 inch socket and bears on a wide integral washer, which is what you want on one-hole straps, strut, and sheet metal brackets because it will not pull through. A flat or Phillips flat head is for applications that must sit flush, such as under a door track or a furring strip.
5) Can I drive these with a cordless impact driver?
Yes. Use a 5/16 inch magnetic hex socket in an impact driver or impact wrench and drive until the washer seats; do not keep hammering after it bottoms, because overdriving a screw anchor strips the thread it just cut in the concrete and the holding value is gone.
6) What is the Metallics part number to reorder these anchors?
Order by manufacturer part number CSH50FM from Metallics. That is the 1/4 by 3-1/4 inch blue steel-zinc hex washer head screw anchor in the 1,000 piece box.
How fast can I get the Metallics CSH50FM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics CSH50FM come with a warranty?
Absolutely. The Metallics CSH50FM is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics CSH50FM?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics CSH50FM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.