You may also like
Anchors 1/4X1-3/4 QDrv St-zn (Jar100)
Manufacturer Resources
Product Specs
- Minimum Purchase:
- 100 units
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Family:
- Electrical Supplies
- Sub Division:
- Electrical-E H2
- Product Type:
- Self Tapping Screw
- Product Group:
- Fasteners
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics QCSH20 – Frequently Asked Questions
1) Do I need to install an expansion plug or shield with these 1/4 inch Metallics anchors?
No separate plastic or lead shield is needed. The QCSH20 is a self-tapping screw anchor, so it cuts its own thread into a properly sized pre-drilled hole in concrete or masonry and holds directly. You still drill the hole first, and you drive it with a quick-drive (hex/socket style) bit rather than a screwdriver.
2) How many Metallics QCSH20 anchors come in a jar?
They ship 100 to a jar. That is the pack type for the QCSH20, so ordering one unit gets you a 100-piece jar rather than a loose count.
3) Is a zinc-plated Metallics anchor screw OK for outdoor or damp locations?
Zinc plating on steel is a mild corrosion coating, fine for dry interior work and protected areas. For exterior exposure, wet locations, or coastal jobs, spec a stainless or hot-dip galvanized anchor instead, because plating alone will eventually rust in standing moisture.
4) What are electricians using these 1/4 x 1-3/4 Metallics anchors for?
Typical use is fastening electrical work to concrete block or poured walls: strut and channel, panel and enclosure backs, conduit straps and clamps, junction and device boxes. At 1-3/4 inches overall, the usable embedment is short, so it suits thin-mounted items rather than deep standoffs or thick backing plates.
How fast can I get the Metallics QCSH20 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics QCSH20 come with a warranty?
Absolutely. The Metallics QCSH20 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics QCSH20?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics QCSH20 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.