You may also like
Anchors 5/8 X 5 Wedge Ancr SS (Box 25)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Box
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Anchors
Metallics TS505SS – Frequently Asked Questions
1) Is the Metallics TS505SS anchor stainless steel, and can I use it outdoors?
Stainless steel, which is why it gets specified for exterior pads, rooftop equipment curbs, pool decks, parking structures and wash-down areas where a plated carbon steel wedge anchor would rust at the stud and stain the concrete.
2) Can I use a 5/8 x 5 wedge anchor in block or brick instead of concrete?
No. Wedge anchors like the TS505SS are for solid, cured poured concrete only. The clip needs solid, uniform material to expand against, and hollow block or brick will crumble or let the anchor spin. For block, use a sleeve anchor or a screen tube with threaded rod and epoxy.
3) How many anchors come in a box of Metallics TS505SS?
They ship as a box of 25 anchors. Each anchor comes with its nut and washer, which is normal for a wedge anchor, so a box covers 25 anchor points with no separate hardware to buy.
4) How much material thickness can a 5/8 x 5 inch wedge anchor hold down?
With a 5 inch overall length, the anchor splits between embedment and the fixture you are clamping. A 5/8 inch wedge anchor needs several inches in the concrete to develop its values, so plan on fastening material in the range of an inch or two thick plus nut and washer, and verify your required embedment for the load. If your base plate or curb is thicker, step up to a longer 5/8 inch anchor rather than shortening embedment.
5) Can a wedge anchor be removed or reused once it is set?
No. The TS505SS sets permanently once the clip expands against the hole wall. You can back the nut off and remove whatever is bolted down, but the anchor body stays in the concrete, and it cannot be pulled and reused. If you need a removable fastener for repeat equipment changes, use a female-threaded drop-in or a machine screw anchor instead.
6) What is the Metallics part number to order for a 5/8 inch stainless wedge anchor?
Order Metallics TS505SS. That is the single catalogue designation for the 5/8 x 5 inch stainless steel wedge anchor, sold by the box of 25, with no finish or length options to specify.
How fast can I get the Metallics TS505SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics TS505SS come with a warranty?
Absolutely. The Metallics TS505SS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics TS505SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics TS505SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.