Eaton B-Line series open frame racks, 810 lb load capacity, Steel, Telco gray powder coat finish, Heavy duty caster base
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Load Capacity Dynamic:
- 810 lb
- Product Height:
- 24.31 in
- Product Length Depth:
- 24.31 in
- Product Weight:
- 51 lb
- Product Width:
- 23 in
- Department:
- Electrical
- Product Model:
- Heavy duty caster base
- Product Finish:
- Telco gray powder coat
- Product Material:
- Steel
- Product Length:
- 24.31 in
- Product Length:
- 24.31 in
B-LINE SB59823TG – Frequently Asked Questions
1) How much weight can the B-Line SB59823TG caster base carry under a loaded open frame rack?
The SB59823TG heavy duty caster base is rated for an 810 lb dynamic load, meaning that is what it will carry while the rack is being rolled, not just parked. Size your gear total against that figure before you move a populated rack.
2) What footprint do I need to allow for a B-Line caster base under a two-post rack?
Plan for 23 in wide by 24.31 in deep, with the base itself standing 24.31 in high. That depth is the number that matters in a tight closet or when the rack sits near a wall, since the base extends beyond the rack uprights for stability.
3) Is the B-Line SB59823TG a complete rack or just the base?
It is the caster base only, ordered as model SB59823TG, and it weighs 51 lb on its own. You still need the open frame rack uprights and any hardware, panels or cable management separately.
4) Will the Telco gray finish on this B-Line caster base match my existing open frame racks?
The base is finished in Telco gray powder coat, the standard gray B-Line uses across its open frame rack line, so it reads the same as existing Telco gray racks and accessories in the same room. Black-finished racks will show a clear difference.
5) Is this caster base steel, and will it hold up in a working MDF or shop environment?
Construction is steel with a powder coat finish, which is what you want for an indoor equipment room, MDF or service shop where the base gets knocked and kicked. Powder coat over steel takes contact better than a painted finish.
6) Do I need a lift or two people to set this B-Line caster base in place?
At 51 lb it is a one-person carry for most installers, though setting a rack frame down onto it is easier with two. Plan the handling for the assembled rack, not the base.
How fast can I get the B-LINE SB59823TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB59823TG come with a warranty?
Absolutely. The B-LINE SB59823TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB59823TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB59823TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.