B-Line Eaton series open racks, 810 lb load capacity, Steel, Telco gray powder coat, Heavy duty caster base

The SB59819TG heavy duty caster base is rated for 810 lb dynamic load, meaning that is what it will carry while the rack is being rolled. Count the base's own 45 lb into your total when you plan the move, and remember that figure covers the rack frame plus everything mounted in it.

Yes. The SB59819TG base measures 20.31 in high, so every rack unit in the frame sits that much further off the floor once the rack is on it. Check overhead cable tray and ceiling clearance before you commit, particularly with a full-height open frame.

It is finished in telco gray powder coat, the same finish used across the Eaton B-Line open frame rack line, so it blends with existing telco gray frames and relay racks in the room. The base itself is steel under the powder coat.

A caster base like the SB59819TG is the choice when the rack has to move: staging areas, test benches, lab and broadcast rooms, or anywhere you need to pull the frame out to get behind it. It carries 810 lb dynamic. If the rack is permanent, heavily loaded, or in a seismic zone, a fixed floor-mount or seismic base is the right call instead, because rolling hardware is not meant to be the long term anchor.

At 45 lb, one person can move the base, but getting an already populated rack lifted onto it is a two person job. Common practice is to fit the base to the empty frame first and load equipment after.