You may also like
B-Line Eaton series strut fittings and accessories, 3.5" Height, 24" Length, 1.62" Width, 4.12lbs, Steel, Bracket, channel opening upward, Uniform loa
Model: BLN-B293-24ZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 24" Length, 1.62" Width, 4.12lbs, Steel, Bracket, channel opening upward, Uniform load capacity 300 lb, Electro-plated
B-LINE
$28,883.95
B-Line Eaton series strut fittings and accessories, 3.5" Height, 12" Length, 1.62" Width, 2.52lbs, Steel, Bracket, channel opening downward, Uniform l
Model: BLN-B293A-12HDG
Eaton B-Line series strut fittings and accessories, 3.5" Height, 12" Length, 1.62" Width, 2.52lbs, Steel, Bracket, channel opening downward, Uniform load capacity 600, Hot-dipped galvanized
B-LINE
$23,620.45
B-Line Eaton series strut fittings and accessories, 3.5" Height, 6" Length, 1.62" Width, 1.44lbs, Steel, Bracket, channel opening downward, Uniform lo
Model: BLN-B293A-6ZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 6" Length, 1.62" Width, 1.44lbs, Steel, Bracket, channel opening downward, Uniform load capacity 1200 lb, Electro-plated
B-LINE
$17,381.60
B-Line Eaton series strut fittings and accessories, 3.5" Height, 18" Length, 1.62" Width, 3.4lbs, Steel, Bracket, channel opening downward, Uniform lo
Model: BLN-B293A-18ZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 18" Length, 1.62" Width, 3.4lbs, Steel, Bracket, channel opening downward, Uniform load capacity 400 lb, Electro-plated
B-LINE
$26,773.80
B-Line Eaton series strut fittings and accessories, 3.5" Height, 12" Length, 1.62" Width, 2.84lbs, Steel, Clevis bracket, channel opening downward, Un
Model: BLN-B198A-12HDG
Eaton B-Line series strut fittings and accessories, 3.5" Height, 12" Length, 1.62" Width, 2.84lbs, Steel, Clevis bracket, channel opening downward, Uniform load capacity 800 lbs, Hot-dipped galvanized
B-LINE
$20,887.78
Eaton B-Line series strut fittings and accessories, 3.5" Height, 24" Length, 1.62" Width, 4.12lbs, Steel, Bracket, channel opening downward, Uniform load capacity 300 lb, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 24 in
- Product Weight:
- 4.12 lb
- Product Width:
- 1.62 in
- Special Features:
- Number of mounting holes (1) 9/16 in diameter
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Bracket, channel opening downward
- Product Finish:
- Electro-plated
- Product Details:
- Bracket, channel opening downward
- Product Material:
- Steel
B-LINE B293A-24ZN – Frequently Asked Questions
1) How much weight can the B-Line B293A-24ZN strut bracket hold?
The B293A-24ZN carries a uniform load capacity of 300 lb. That figure is for uniformly distributed load across the 24 inch span, not a point load hung at the free end, so spread your supported conduit or pipe runs along the channel rather than concentrating everything at one spot.
2) What size anchor or bolt does the B-Line B293A bracket mount with?
There is one mounting hole, 9/16 inch diameter, in the B293A-24ZN bracket. That clears a 1/2 inch bolt, anchor, or threaded rod with room to adjust. Only the single hole is provided, so the mounting surface has to take the full reaction load at one point.
3) Which way does the channel face on the B-Line B293A-24ZN bracket?
The channel opens downward on this bracket. That means your strut nuts, clamps, and hangers drop into the slot from underneath, which is what you want for suspending conduit, cable tray, or pipe below a wall- or column-mounted arm. If you need the slot facing up to sit equipment on top, this is the wrong orientation and you want the channel-opening-upward version.
4) Will standard 1-5/8 inch strut nuts and pipe clamps fit the B-Line B293A-24ZN?
Yes. The channel section is 1.62 inches wide, the nominal 1-5/8 inch strut profile, so the usual spring nuts, conduit clamps, and beam clamps built for that channel size seat in it normally. The fittings are sold separately; the bracket ships as the bracket alone.
5) Is the B-Line B293A-24ZN bracket suitable for outdoor or wet locations?
It is steel with an electro-plated finish. Electro-plated zinc is a thin coating meant for dry indoor service, mechanical rooms, and covered areas. For exterior, washdown, or corrosive environments, specify a hot-dip galvanized or stainless strut bracket instead.
6) What is the exact part number for the 24 inch B-Line downward-opening strut bracket?
Order it as B293A-24ZN from Eaton B-Line. The 24 in the number is the 24 inch arm length and the ZN suffix is the electro-plated zinc finish.
How fast can I get the B-LINE B293A-24ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B293A-24ZN come with a warranty?
Absolutely. The B-LINE B293A-24ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B293A-24ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B293A-24ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.