You may also like
IXIO-DT1
MOTION & PRESENCE SENSOR FOR AUTOMATIC SLIDING DOORS
TECHNOLOGY: Radar & Active Infrared
BEA’s IXIO-DT1 is a dual technology motion and presence sensor, combining microwave activation and infrared presence detection for the automatic sliding door industry.
This solution is highly flexible and user-friendly for sliding doors, industrial doors, vehicle gate detection and off-door automation.
The IXIO-DT1 can be adjusted into ANSI compliance and has earned a comprehensive list of credentials and certifications, including FCC and IP54.
The IXIO-DT1 ensures convenience, safety and energy efficiency for BEA customers and end users.
REFERENCE
-
IXIO-DT1 Quick Start Guide DOWNLOAD
-
IXIO-DT1 User Guide DOWNLOAD
-
IXIO-DT1 Cut Sheet DOWNLOAD
-
IXIO-DT1 Architectural Spec Sheet DOWNLOAD
-
BEA Zip Code Troubleshooting Guide DOWNLOAD
-
Sliding Door Solutions Comparison Sheet DOWNLOAD
-
Application Note - Monitoring by Voltage DOWNLOAD
-
Application Note - Sliding Door Wiring Matrix DOWNLOAD
-
Application Note - Zip Code DOWNLOAD
Manufacturer Resources
Product Specs
- Product Type:
- Motion and Presence Sensor
- Series:
- IXIO-DT1
- Subcategory:
- Sensors, Switches, Relays and Timers
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Technology:
- Radar & Active Infrared
- Collection:
- IXIO-DT1
- Product Category:
- Electronic Access Control
BEA 10IXIODT1 – Frequently Asked Questions
1) What types of automatic sliding doors is this BEA motion sensor compatible with?
This BEA 10IXIODT1 works with most commercial automatic sliding door systems. It's designed for single or bi-parting doors in retail, office, and institutional applications. Verify your door controller accepts standard motion sensor inputs before installation.
2) How does the ten-level microwave sensitivity adjustment work?
The sensor offers ten microwave sensitivity settings from 1 (minimum) to 10 (maximum). Lower settings reduce false activations from wind or small objects. Higher settings increase detection range for heavy traffic areas. Adjust via onboard controls during commissioning.
3) What are the three infrared safety immunity settings for?
The three IR immunity levels help prevent false safety triggers from sunlight, artificial lighting, or reflective surfaces. Level 1 provides basic immunity, level 3 maximum immunity. Adjust based on your installation environment and lighting conditions.
4) How does it distinguish between approaching and departing traffic?
The sensor uses dual-zone microwave detection to determine direction of movement. It tracks motion patterns to identify whether people are approaching the door or walking away. This prevents unnecessary door activations from departing traffic.
5) What power requirements does this motion sensor need?
Check the sensor specifications for exact voltage and current requirements. Most BEA sensors operate on low voltage DC power supplied by the door controller. Verify your door system can provide adequate power before ordering.
6) Where should this sensor be mounted for optimal performance?
Mount the sensor above the door opening per manufacturer specifications. Typical height is 8-12 feet with proper angle adjustment. Avoid mounting near HVAC vents, bright lights, or reflective surfaces that could cause false activations.
7) Can this sensor work in outdoor applications?
Verify the IP rating and temperature specifications for outdoor use. Some BEA sensors are rated for exterior applications while others are indoor-only. Consider weather protection and adjust sensitivity settings for outdoor conditions like wind and precipitation.
8) What's the typical detection range and coverage area?
Detection range varies with sensitivity settings and mounting height. Typical coverage includes the door opening plus approach zones on both sides. Consult the installation template for specific coverage patterns and adjust sensitivity as needed.
9) How do you wire this sensor to the door controller?
Connect per the wiring diagram provided with the sensor. Typical connections include power, activation output, and safety output terminals. Use proper low-voltage wiring methods and test all functions before final commissioning.
10) What maintenance does this motion sensor require?
Clean the sensor lens periodically with a soft cloth. Check mounting hardware for tightness. Test detection patterns monthly and adjust sensitivity if needed. Replace the sensor if detection becomes erratic or unreliable.
11) Are there similar BEA sensors with different features?
BEA offers various motion sensors with different sensitivity ranges, mounting options, and feature sets. Browse our BEA products or door hardware section for alternatives that match your specific application needs.
How fast can I get the BEA 10IXIODT1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA 10IXIODT1 come with a warranty?
Absolutely. The BEA 10IXIODT1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA 10IXIODT1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the BEA 10IXIODT1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.
