You may also like
Metallics JSBH27D Bolts 3/8-16 x 1-3/4 HXBT SS (Jar 100)
Model: MET-JSBH27D
Bolts 3/8-16 x 1-3/4 HXBT SS (Jar 100)
Features
Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may...
Metallics
$58.23
$11.57
Bolts 3/8-16 X 1-3/4 Hxbt SS (Jar 100)
Additional Notes
- Other sizes and quantities available by request
Features
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Height:
- 15/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.551 - 0.562 in.
- Fastener Height:
- 0.226 - 0.243
- Fastener Length:
- 1/3/04
- Fastener Width:
- 0.628 - 0.650
- Hardness:
- Rockwell B95-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_Dom_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.3690 - 0.3750 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 7.25 in
- Product Length:
- 4.5 in
- Product Weight:
- 2935 g
- Product Width:
- 114.3 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 100000 - 150000 psi minimum
- Thread Per Inch:
- 16
- Yield Strength:
- 65000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 18-8 Stainless Steel
Metallics JSBH27 – Frequently Asked Questions
1) What thread does the Metallics JSBH27 hex bolt use, and will it take a standard 3/8-16 nut?
The JSBH27 is a 3/8-16 hex bolt, 16 threads per inch, which is the standard UNC coarse thread for 3/8 inch diameter. Any standard 3/8-16 coarse nut or tapped hole will take it. Shank outside diameter runs 0.3690 to 0.3750 inch.
2) Will 18-8 stainless hex bolts hold up in a food processing or washdown area?
18-8 stainless is the grade used where you need general atmospheric corrosion resistance, including chemical and food processing equipment. It is an austenitic alloy, so it is non-hardenable by heat treat and non-magnetic in the annealed state. Aggressive chemical exposure or chlorides is where 18-8 falls short, and 316 stainless is the move there.
3) How strong is the Metallics JSBH27 stainless bolt compared with a plated steel grade 5?
Tensile strength is 100,000 to 150,000 psi minimum with a 65,000 psi minimum yield, and hardness runs Rockwell B95 to C32. That puts it below a Grade 5 steel bolt on yield, so if your drawing calls out a graded steel fastener torque spec, do not substitute stainless without checking the load. You buy 18-8 for corrosion resistance, not for strength.
4) Do these Metallics stainless hex bolts qualify for Buy American or ARRA funded work?
The JSBH27 is flagged Buy American compliant and ARRA compliant. Country of origin is listed as multiple, so if your contract requires documented origin on a specific lot, get that confirmed against the shipment paperwork.
5) How many bolts come in the Metallics JSBH27 package?
It ships as a jar of 100 pieces, and 100 count is the order minimum, so one jar is the smallest buy. That is the shop-stock pack rather than a bulk box.
6) Are nuts and washers included with the JSBH27 bolt jar?
No. The jar contains 100 hex bolts only. Order 3/8-16 stainless hex nuts and 3/8 inch stainless flat and lock washers separately, and keep them in the same alloy family so you are not pairing stainless with plated steel in a wet location, which invites galvanic corrosion.
7) Is the JSBH27 a full hex head cap screw or a carriage style bolt?
Hex head, driven with a wrench or socket, not a smooth dome. Head type is hex and the part is a hexagonal bolt, so it needs wrench access on both the head and the nut unless you are threading into a tapped hole.
How fast can I get the Metallics JSBH27 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSBH27 come with a warranty?
Absolutely. The Metallics JSBH27 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSBH27?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSBH27 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.