You may also like
Metallics JSBH27D Bolts 3/8-16 x 1-3/4 HXBT SS (Jar 100)
Model: MET-JSBH27D
Bolts 3/8-16 x 1-3/4 HXBT SS (Jar 100)
Features
Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may...
Metallics
$58.23
$11.57
Bolts 3/8-16 X 3/4 Hxbt SS (Jar 100)
Additional Notes
- Other sizes and quantities available by request
Features
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Fastener Head Height:
- 15/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.551 - 0.562 in.
- Fastener Height:
- 0.226 - 0.243
- Fastener Length:
- 4-Mar
- Fastener Width:
- 0.628 - 0.650
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell B95-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_Dom_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- JR
- Outside Diameter:
- 0.3690 - 0.3750 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 4.57 in
- Product Length:
- 3 in
- Product Weight:
- 1619 g
- Product Width:
- 76.2 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 100000 - 150000 psi minimum
- Thread Per Inch:
- 16
- Yield Strength:
- 65000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 18-8 Stainless Steel
Metallics JSBH44 – Frequently Asked Questions
1) What thread size and pitch is the Metallics JSBH44 hex bolt, and will it thread into a standard 3/8-16 tapped hole?
The JSBH44 is a 3/8-16 hex bolt, 16 threads per inch, with a measured outside diameter of 0.3690 to 0.3750 inch. That is standard 3/8-16 UNC, so it threads into any 3/8-16 tapped hole, strut nut, or channel nut. Shank length is 3/4 inch, so figure your clamped material plus nut engagement against that.
2) Is the Metallics JSBH44 bolt 18-8 or 316 stainless, and will it hold up outdoors?
It is 18-8 stainless steel, an austenitic alloy suited to general atmospheric corrosion resistance, which covers typical outdoor and damp indoor use along with chemical and food-processing equipment. Aggressive chemical exposure or marine salt service is where you step up to 316 instead.
3) How strong is a 3/8-16 18-8 stainless hex bolt like the JSBH44?
Tensile strength runs 100,000 to 150,000 psi minimum with a yield of 65,000 psi minimum, and hardness is Rockwell B95 to C32. That is typical austenitic stainless territory, below a plated Grade 5 or Grade 8 carbon bolt, so if a structural drawing calls out a grade rather than stainless, check the spec before substituting.
4) Are Metallics JSBH44 stainless bolts acceptable on a Buy American or ARRA-funded job?
No. The JSBH44 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. For federally funded work carrying domestic sourcing requirements you will need a domestic-origin fastener instead.
5) How many bolts come in a jar, and can I buy fewer than 100?
These ship as a jar of 100, and the jar is the minimum order unit, so 100 pieces is the smallest quantity. Other sizes and quantities are available by request.
6) Do nuts or washers come with the Metallics JSBH44 bolts?
The jar contains hex bolts only, 100 of them. Nuts, flat washers, and lock washers are separate line items, so add 3/8-16 nuts and 3/8 washers to the order if the connection needs them.
7) What are 3/8-16 x 3/4 stainless hex bolts normally used for on an electrical or mechanical job?
Typical use is electrical, plumbing, heating and air conditioning work: strut and channel assembly, hanger and bracket attachment, panel and enclosure mounting, and equipment where corrosion resistance matters more than maximum strength. The 3/4 inch length suits thin-to-moderate stack-ups such as strut plus a fitting.
How fast can I get the Metallics JSBH44 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSBH44 come with a warranty?
Absolutely. The Metallics JSBH44 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSBH44?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSBH44 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.