Burndy BIT350 Multi-Tap Connec...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$18.70
Burndy BIT350 Multi-Tap Connector

Burndy BIT350 Multi-Tap Connector

(No reviews yet) Write a Review

Model: BIT-2/0

In Stock (leaves warehouse same day if ordered before 3pm ET)

$18.70
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Burndy BIT350 Multi-Tap Connector, 2-Port Clear Insulated, #10 AWG-350 kcmil

The Burndy BIT350 is a clear Plastisol-covered aluminum multiple tap connector engineered for reliable branch and tap connections on code conductors. Part of Burndy's UNITAP™ series, this 1-side entry, 2-port connector accepts a conductor range of #10 AWG-350 kcmil and is Al/Cu rated, meaning it is suitable for use with both aluminum and copper conductors. The clear insulated Plastisol housing lets installers visually confirm proper conductor seating before energizing the circuit, and the connector is UL486B Listed for code-compliant electrical work in commercial and industrial settings.

Key Features

  • Conductor Range: Accommodates #10 AWG-350 kcmil conductors, giving electricians a wide working range for branch and tap circuits from a single connector body.
  • Durable Construction: Aluminum connector body with a clear Plastisol covering that provides electrical insulation while allowing visual inspection of the conductor connection underneath.
  • 1-Side Entry, 2-Port Design: Multiple tap configuration with single-side conductor entry simplifies run/tap installations where access is limited to one side of the connector.
  • Al/Cu Rated: Rated for use with both aluminum and copper code conductors, adding flexibility when tapping mixed-metal conductor runs.
  • Clear Insulated Housing: The transparent Plastisol cover is a defining feature of the BIT350, letting installers verify that conductors are fully seated and properly torqued.
  • UNITAP™ Series: Part of Burndy's Unitap multi-tap connector line, built for dependable, code-compliant run/tap connections.

Certifications & Compliance

  • UL486B Listed

Technical Specifications

  • Conductor Range: 10-AWG
  • Product Material: Copper
  • Insulated: Yes
  • Series: Unitap
  • Connector Type: Multi Tap
  • Conductor - AL Str Size Range: 10 AWG - 350 kcmil
  • Conductor - Copper Str Size Range: 10 AWG - 350 kcmil
  • Product Type: Run/Tap
  • Trade Name: UNITAP™

Typical Applications

  • Electrical Branch and Tap Circuit Connections
  • Commercial and Industrial Electrical Installations
  • Panelboard and Junction Box Wiring
  • Aluminum-to-Copper Conductor Transitions
  • Code Conductor Run/Tap Applications

Why Burndy?

Burndy is a recognized name in electrical connector manufacturing, and the BIT350 reflects that standard with UL486B Listed performance, Al/Cu rated versatility, and a clear insulated Plastisol housing that supports confident, verifiable installations. The UNITAP™ series construction gives electrical professionals a dependable multi-tap solution for code-compliant run and tap connections on #10 AWG-350 kcmil conductors.

Manufacturer Resources

Spec Sheet

Product Specs

Insulated:
Yes
Series:
Unitap
Connector Type:
Multi Tap
Conductor - AL Str Size Range:
10 AWG - 350 kcmil
Conductor - Copper Str Size Range:
10 AWG - 350 kcmil
Product Type:
Run/Tap
Trade Name:
UNITAP™
Product Material:
Copper
list_batch:
BUR-20260916
Department:
Electrical
Product Subgroup:
Lugs & Terminals
Product Group:
Wire Connectors & Terminals

Burndy BIT-2/0 – Frequently Asked Questions

1) Can the Burndy BIT350 Unitap connector be used on aluminum conductors as well as copper?
Yes, the BIT350 is Al/Cu rated, so it takes aluminum or copper stranded conductors and can be used where an aluminum feeder is tapped to copper branch wire. Both the aluminum and copper stranded ranges are 10 AWG to 350 kcmil, so you don't have to derate the opening depending on which metal goes in it.
2) What wire sizes will the Burndy BIT350 multi-tap connector accept?
Each port accepts stranded conductor from #10 AWG up to 350 kcmil, the same range for aluminum and copper. That covers a 350 kcmil run conductor with small branch taps out of the same body, which is why one connector can serve a range of circuits instead of stocking a separate lug per size.
3) How many ports does the Burndy BIT350 have and which side do the conductors enter?
It's a 2-port, 1-side entry connector. Both conductors land from the same face, which matters when the body is mounted tight against a panel wall or in the back of a junction box where you can only get a screwdriver in from one direction.
4) Is the Burndy BIT350 insulated, or do I have to tape and boot it after landing the wires?
It comes insulated. The aluminum body is covered in clear Plastisol, so no separate boot or tape build-up is needed for the cover itself. Because the cover is transparent you can still see the conductors in the ports and confirm they are fully seated under the setscrews before the circuit is energized, which is the main reason inspectors and electricians pick the clear version over an opaque cover.
5) What is the difference between the BIT-350 and the BIT-2/0 Unitap connectors?
They are two different sizes of the same Unitap multi-tap body, ordered by wire size. BIT-350 is the 350 kcmil-class connector covering #10 AWG to 350 kcmil, and BIT-2/0 is the smaller 2/0 AWG-class body. Pick by the largest conductor you need to land, usually the run conductor.
6) Should I use a multi-tap connector like the BIT350 or a standard compression lug for a branch tap?
A multi-tap connector is the mechanical, setscrew answer: two ports on one side, no crimp tool, no die set, and the conductor can be removed and re-landed later. A compression lug is a one-shot crimp that needs the matching tool and die and terminates a single conductor to a pad. For tapping a branch off a feeder inside a panel or box where you want serviceability and no tooling, the BIT350 Unitap is the right type. If you are bolting a single conductor to a breaker or bus pad, use a lug instead.
7) Where do the Burndy BIT350 Unitap connectors get used on a job?
Typical use is branch and tap connections on code conductors inside panelboards and junction boxes, and aluminum-to-copper conductor transitions. Electrical contractors and MRO crews use them where a feeder needs to feed a smaller circuit without cutting and splicing the run.
8) Where can I get the manufacturer spec sheet for the Burndy BIT350?
Hubbell publishes the BIT350 spec sheet at https://hubbellcdn.com/specsheet/BRDY-BIT350-SPEC-EN.pdf. That is the document to attach when a spec requires submittal data for the connector.
How fast can I get the Burndy BIT-2/0 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Burndy BIT-2/0 come with a warranty?
Absolutely. The Burndy BIT-2/0 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Burndy BIT-2/0?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Burndy BIT-2/0 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!