Burndy Unitap Multi-Tap Connec...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.59
Burndy Unitap Multi-Tap Connector, Aluminum

Burndy Unitap Multi-Tap Connector, Aluminum

(No reviews yet) Write a Review

Model: 1PLD2/03

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Burndy 1PLD7508 Unitap 8-Port Insulated Multi-Tap Connector

The Burndy 1PLD7508 is a Unitap series multi-tap connector engineered for splicing and tapping electrical conductors ranging from #2 AWG to 750 kcmil. Built with an aluminum connector body and finished in UV rated black insulation, this double-sided entry connector provides 8 independent ports for terminating multiple conductors at once, making it well suited for power distribution points that require dependable copper and aluminum conductor connections. An oxide inhibitor is pre-installed at the factory to help maintain a clean, low-resistance connection point over the life of the installation.

Key Features

  • 8-Port, Double-Sided Entry: Provides 8 independent ports with double-sided entry, allowing conductors to be landed and tapped from either side of the connector body.
  • Conductor Range: Accepts conductors from #2 AWG up to 750 kcmil, spanning the listed size ranges for both copper and aluminum conductors.
  • Aluminum Body Construction: Aluminum connector body designed for the mechanical demands of multi-conductor tap and distribution applications.
  • UV Rated Black Insulation: UV rated black insulating cover helps resist degradation from prolonged sunlight exposure in outdoor or exposed installations.
  • Pre-Installed Oxide Inhibitor: A factory pre-installed oxide inhibitor helps prevent corrosion at the conductor interface and supports a stable, low-resistance connection.
  • Unitap Series: Part of Burndy's Unitap family of multi-tap distribution connectors used for run/tap electrical connections.

Technical Specifications

  • Conductor Range: 2-AWG
  • Ports: 8
  • Product Material: Copper
  • Insulated: Yes
  • Series: Unitap
  • Connector Type: Multi Tap
  • Conductor - AL Str Size Range: 2 AWG - 750 kcmil
  • Conductor - Copper Str Size Range: 2 AWG - 750 kcmil
  • Product Type: Run/Tap

Typical Applications

  • Electrical Power Distribution and Conductor Splicing
  • Copper and Aluminum Conductor Tap Connections
  • Outdoor and Exposed Conductor Installations
  • Commercial and Industrial Electrical Systems
  • Underground and Utility Distribution Wiring

Why Burndy?

Burndy connectors are built for dependable electrical connections in demanding power distribution applications. The 1PLD7508 pairs an aluminum connector body with UV rated black insulation and a pre-installed oxide inhibitor to support corrosion-resistant, low-resistance performance across both copper and aluminum conductors. As part of the Unitap series, this 8-port multi-tap connector reflects the consistent build quality electrical professionals rely on from Burndy.

Manufacturer Resources

Product Specs

Series:
Unitap
list_batch:
BURNDY-20260915
Product Type:
Run/Tap
Connector Type:
Multi Tap
Department:
Electrical
Product Subgroup:
Lugs & Terminals
Product Group:
Wire Connectors & Terminals

Burndy 1PLD2/03 – Frequently Asked Questions

1) What wire sizes will the Burndy Unitap multi-tap connector accept?
Each port takes conductors from #2 AWG up to 750 kcmil, and the same range applies to both stranded copper and stranded aluminum. So you can land a 750 kcmil feeder run and tap down to #2 branch conductors in the same block.
2) Can I mix copper and aluminum conductors in the same Burndy Unitap connector?
Yes. The Unitap multi-tap block is rated for both copper and aluminum stranded conductors over the same 2 AWG to 750 kcmil range, and an oxide inhibitor is installed at the factory to keep the conductor interface corrosion free and low resistance. That is what makes it usable where an aluminum service feeder taps to copper branch runs.
3) How many ports does the Burndy Unitap 1PLD come in, 3 or 8?
Two port counts are sold: the 3-port 1PLD2/03 and the 8-port 1PLD7508. Pick by how many conductors you have to land at the distribution point, including the incoming run. An 8-port block gives you seven taps off one feeder if one port carries the run.
4) Is the Burndy 1PLD7508 insulated, or do I need to tape and boot it?
It ships insulated. The 1PLD7508 has a UV rated black insulating cover over the connector body, so no separate boot or tape build-up is needed to cover the block itself.
5) Can this multi-tap connector be used outdoors or in direct sunlight?
The insulating cover is UV rated, which is why the Unitap block is listed for outdoor and exposed conductor installations as well as underground and utility distribution wiring. In an exposed pull box or a rooftop disconnect the cover resists sunlight degradation rather than chalking and cracking.
6) Can I feed conductors into a Unitap block from both sides?
Yes, it is a double-sided entry design, so conductors can be landed and tapped from either side of the body. That matters in a tight gutter or trough where your feeder comes in one end and the taps leave the other.
7) Is a Unitap block the right choice instead of crimp splices for a power distribution tap?
A multi-tap run/tap block is what you use when several conductors have to come off one run at a single point and you want each one removable later. Crimp or compression splices are one-to-one and permanent. The Unitap gives you 3 or 8 independent mechanical ports over a 2 AWG to 750 kcmil range with the oxide inhibitor already in place, so a gutter tap or a distribution point is done in one device instead of a bundle of splices.
How fast can I get the Burndy 1PLD2/03 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Burndy 1PLD2/03 come with a warranty?
Absolutely. The Burndy 1PLD2/03 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Burndy 1PLD2/03?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Burndy 1PLD2/03 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!