Burndy UNITAP Aluminum Multi-T...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$39.29
Burndy UNITAP Aluminum Multi-Tap Run/Tap Connector

Burndy UNITAP Aluminum Multi-Tap Run/Tap Connector

(No reviews yet) Write a Review

Model: 1PL2/03

In Stock (leaves warehouse same day if ordered before 3pm ET)

$39.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Burndy UNITAP Aluminum Multi-Tap Run/Tap Connector

The Burndy UNITAP Aluminum Multi-Tap Run/Tap Connector family provides clear plastisol-covered, insulated splicing and tapping solutions for aluminum and copper conductors in service entrance and distribution work. This connector series is available in configurations ranging from a 3-Port, 1-Sided Entry design accepting 2/0-14 AWG conductors up to a 6-Port, 2-Sided Entry design accepting 14-4 AWG conductors, letting installers select the port count and wire range that fits the run. Every UNITAP connector in this family shares an aluminum body and aluminum hardware, Al/Cu conductor compatibility, a pre-installed oxide inhibitor, and a minimum 600V rating, with UL Listing and CSA Certification for code-compliant installations.

Key Features

  • Port Count & Entry Configuration: Choose from a 3-Port, 1-Sided Entry connector or a 6-Port, 2-Sided Entry connector to match your branching requirements.
  • Wire Range Options: Options span 2/0-14 AWG on the 3-Port version to 14-4 AWG on the 6-Port version, covering a broad range of Al/Cu conductor sizes across the family.
  • Aluminum Construction: Aluminum body and aluminum hardware throughout the series, rated Al/Cu for mixed conductor runs.
  • Clear Insulation: Clear plastisol covering insulates every connection while allowing visual inspection of the splice.
  • Pre-Installed Oxide Inhibitor: Factory-applied inhibitor on every connector in the family guards against aluminum oxidation at the termination point.
  • Voltage Rating: Rated 600V minimum across the family for service entrance and distribution applications.
  • Hardware: Screw hardware with a hex key drive for secure termination, sized to the connector configuration.
  • Connector Type: UNITAP Multi Tap / Run-Tap configuration for branching taps off a single conductor run.

Certifications & Compliance

  • UL Listed
  • UL468A-468B Industry Standard
  • CSA Certified
  • RoHS Compliant

Technical Specifications

  • Product Material: Aluminum
  • Insulated: Yes
  • Min Voltage Rating: 600
  • Industry Standards: UL468A-468B
  • CSA Certified: Y
  • UL Listed: Y
  • Type of Hardware: Aluminum
  • Type of Plating: Unplated
  • Connector Type: Multi Tap
  • Product Type: Run/Tap
  • Trade Name: UNITAP™
  • Port & Wire Range Options: 3-Port, 1-Sided Entry (2/0-14 AWG) or 6-Port, 2-Sided Entry (14-4 AWG)

Typical Applications

  • Electrical Service Entrance Connections
  • Distribution Panel and Load Center Wiring
  • Grounding and Bonding Connections
  • Commercial and Industrial Power Distribution
  • Aluminum-to-Copper Conductor Splicing and Tapping

Why Burndy?

Burndy's UNITAP family combines aluminum construction, a pre-installed oxide inhibitor, and clear plastisol insulation for a corrosion-resistant Al/Cu connection across every port and wire-range option. Backed by UL Listing to UL468A-468B and CSA Certification, this connector family delivers reliable, code-compliant performance for professional electrical installations.

"

Manufacturer Resources

Spec Sheet

Product Specs

Wire Size:
14-4 AWG
Ports:
6
Insulated:
Yes
ROHS Compatible:
Compliant
Min Voltage Rating:
600
Industry Standards:
UL468A-468B
CSA Certified:
Y
Number of Screws:
6
Rated for Direct Burial:
N
UL Listed:
Y
Plated (Yes or No):
N
Insulation Type:
Plastisol
Type of Hardware:
Aluminum
Width (in):
1.50
Type of Plating:
Unplated
CULUS:
N
Number of Ports:
6
UPC:
781810223871
UL Recognized:
N
Height (in):
1.25
Length (in):
2.83
Copper Stranded (Range):
14 AWG-4 Str
Aluminum Size (Range):
8 AWG-4 AWG
Hex Size (Key):
1/8
Screw Size:
1/4
Connector Type:
Multi Tap
Conductor - AL Str Size Range:
8 AWG-4 AWG
Conductor - Copper Str Size Range:
14 AWG - 4 AWG
Product Type:
Multi-Tap Connector
Trade Name:
UNITAP™
list_batch:
BUR-20260916
Product Material:
Aluminum
Voltage Rating:
600V
Listing:
UL Listed
Standards:
UL468A-468B
Series:
UNITAP
Department:
Electrical
Product Subgroup:
Lugs & Terminals
Product Group:
Wire Connectors & Terminals

Burndy 1PL2/03 – Frequently Asked Questions

1) Can I land both aluminum and copper conductors in the Burndy UNITAP multi-tap connector?
Yes. The UNITAP run/tap connectors are rated Al/Cu, so aluminum and copper can go in the same block. On the 6-port BIBD46 the stranded aluminum range is 8 AWG to 4 AWG and the stranded copper range is 14 AWG to 4 AWG, so copper reaches smaller sizes than aluminum does. A factory pre-installed oxide inhibitor is already in each port, which is what you want for the aluminum terminations.
2) Should I get the 3-port or the 6-port UNITAP connector?
It comes down to how many taps you are pulling and how big the conductors are. The 3-port, 1-sided entry version (1PL2/03) accepts 2/0 through 14 AWG, so it is the one to use when a larger service or feeder conductor has to land. The 6-port, 2-sided entry version (BIBD46) handles 14 through 4 AWG only, but gives you six ports with wires entering from both sides, which suits branching several small circuits off a run inside a panel or load center. If you need a 1/0 or 2/0 conductor in the block, the 6-port will not take it.
3) Can I use this Burndy UNITAP connector in a direct-buried or underground splice?
No. The UNITAP aluminum multi-tap connector is not rated for direct burial. Keep it inside an enclosure, panel, load center or gutter. For a buried splice you need a connector specifically listed for direct burial along with a submersible or buried-rated enclosure.
4) Does this Burndy multi-tap connector meet code for a 600V service entrance tap?
It is UL Listed and CSA Certified to UL 468A-468B, with a 600V rating, which is what an inspector looks for on a service entrance or distribution tap. It is also RoHS compliant. Note the listing is UL and CSA separately rather than a cULus mark.
5) What size hex key do I need to tighten a Burndy UNITAP connector?
A 1/8 inch hex key drives the screws on the 6-port UNITAP block, which uses 1/4 inch screws, one per port for six total. No proprietary tool, but the ports are recessed under the plastisol cover, so a long-arm or ball-end hex wrench makes the work easier in a crowded gutter.
6) Will a 6-port Burndy UNITAP connector fit inside my panel gutter?
The 6-port BIBD46 body measures 2.83 inches long, 1.50 inches wide and 1.25 inches high. Check that against your gutter space and remember to allow bending radius for six conductors entering from two sides before you commit to the location.
7) Is the Burndy UNITAP connector insulated, or do I still have to tape the splice?
It comes insulated. A clear plastisol cover encloses the connector body, so no additional taping is needed and you can still see the conductor seated in the port for inspection later. Rating is 600V minimum.
8) Is the body or hardware tin plated on this Burndy UNITAP connector?
No plating. Both the body and the screw hardware are bare aluminum, unplated. That is why the pre-applied oxide inhibitor in the ports matters: it is the corrosion barrier at the aluminum termination. If your spec calls for a tin-plated body, this is not the connector for it.
9) Can I use a Burndy UNITAP block for a grounding or bonding tap?
Yes, grounding and bonding connections are among the intended uses for the UNITAP run/tap family, along with service entrance and panel distribution wiring. Match the wire range to the version you order: 14 to 4 AWG on the 6-port block, 2/0 to 14 AWG on the 3-port.
How fast can I get the Burndy 1PL2/03 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Burndy 1PL2/03 come with a warranty?
Absolutely. The Burndy 1PL2/03 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Burndy 1PL2/03?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Burndy 1PL2/03 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!