Codelock Replacement Dual Backset Deadbolt, Stainless Steel Finish

The Codelocks CL-DBDB dual backset deadbolt is the replacement bolt for the CL210, the CL210 Key Override, and the CL2210. If you are replacing the bolt in any other Codelocks model, this is not the matching part.

Just the bolt. The CL-DBDB is the deadbolt latch assembly only, sold as a service part for CL210 and CL2210 locks. The code keypad, cylinder, and escutcheons are not included, so if the lock body itself has failed you need a complete lock rather than this bolt.

No. The Codelocks CL-DBDB is a dual backset deadbolt built as a replacement latch for the CL210, CL210 Key Override and CL2210 code locks, and it throws a deadbolt rather than a spring latch. The Corbin Russwin 867F21 is a deadlocking latch with a square corner 1-1/8 inch front sized for a 2-3/4 inch backset in a mechanical lockset - a latchbolt with an auxiliary deadlocking plunger, not a deadbolt, and it is not made to mate with a Codelocks code lock chassis. If you are servicing a CL210 or CL2210, the CL-DBDB is the correct part.

Yes. The replacement dual backset deadbolt is rated for both internal and external use, with a stainless steel finish over a zinc alloy body, so it holds up on a weather-facing opening as well as an interior one.

Codelocks lists the CL-DBDB as a commercial part, and it suits internal and external doors. For a heavier commercial mortise or cylindrical lock rebuild you would be looking at a different class of latch entirely, such as the Corbin Russwin 2-3/4 deadlocking latch with the square corner 1-1/8 inch front.