You may also like
Codelocks CL460 & CL465 Narrow Stile Codelock, Stainless Steel Finish
Model: CDL-46X
CL460 & CL465 Narrow Stile Codelock, Stainless Steel Finish
Narrow stile mechanical Codelock suitable for aluminium doors with threaded cylinder and code free option.
Narrow Stile Codelock complete...
Codelocks
Starting at
$298.39
$285.70
Codelocks CL4210 Electronic Tubular Latchbolt, Stainless Steel Finish
Model: COD-CL4210
CL4210 Electronic Tubular Latchbolt
Fully programmable on the door via the keypad with a multiple range of functions.
The outside lever turns freely without operating the latchbolt. When a valid code...
Codelocks
$484.16
Codelocks CL550 & CL555 Mortise Lock Back-to-Back, Stainless Steel Finish
Model: CDL-CL55X
CL550 & CL555 Mortise Lock Back-to-Back
Heavy duty, mechanical ANSI mortise lock.
A heavy duty ANSI mortise lock. The outside lever handle will retract the latch after a correct code is entered. The...
Codelocks
Starting at
$549.99
Replacement Dual Backset Deadlatch
Technical Specs
- Brand - Codelocks
- Finish - Stainless Steel
- Lock Material - Zinc Alloy
- Suitable For - Internal, External
Manufacturer Resources
Product Specs
- Product Group:
- Parts and Accessories
- Product Subgroup:
- Latches
- Product Type:
- Deadlatches
- Subcategory:
- Accessories
- Commercial/Residential:
- Commercial
- Product Model:
- CL-DBDL
- Product Finish:
- Stainless Steel
- Product Category:
- Parts and Accessories
- Product Substrate:
- Zinc Alloy
- Department:
- Door Hardware
Codelocks DBDL – Frequently Asked Questions
1) What does "dual backset" mean on the Codelocks CL-DBDL replacement deadlatch?
A dual backset deadlatch is built to set to either of the two standard residential/commercial door backsets, 2-3/8 inch or 2-3/4 inch, so one part covers both common door preps. Codelocks sells it as model CL-DBDL in a stainless steel finish.
2) Is this a complete lock or just the latch?
Just the latch. The Codelocks CL-DBDL is a replacement deadlatch mechanism, the latching hardware that goes in the door edge, not a full lockset with trim or keypad. Order it when the latch on an existing Codelocks unit has worn out or when you need the other backset.
3) What deadlatch should I use on a 1-3/4 inch narrow stile aluminum door instead of the Codelocks CL-DBDL replacement dual backset deadlatch?
The Codelocks CL-DBDL is a zinc alloy replacement deadlatch in a stainless steel finish, built as a dual backset latch for Codelocks units. For a 1-3/4 inch narrow stile aluminum door, the Adams Rite 4530 is a standard duty Grade 1 deadlatch from the 4530 Series with a bolt holdback feature and a 1-3/4 inch door thickness range. If the opening needs paddle operation and two-point latching, the Adams Rite 4781 is a standard duty Grade 1 deadlatch built for narrow stile doors at the same 1-3/4 inch thickness.
4) Does this Codelocks latch support electric release or access control?
No, the CL-DBDL is a mechanical replacement deadlatch. If you need a latch that releases electrically for an access control system, the Adams Rite 4510 Series is a standard duty electrified deadlatch with a flat faceplate for 1-3/4 inch doors, and the 4300 Series Steel Hawk offers multi-voltage electrified operation.
5) For a high-traffic commercial entrance, how does the Codelocks CL-DBDL compare to a heavy duty deadlatch?
The CL-DBDL is a commercial-rated replacement dual backset deadlatch in zinc alloy with a stainless steel finish, suitable for internal and external doors. Where the opening calls for a heavy duty latch on a 1-3/4 inch door, the Adams Rite Steel Hawk 4300 is a heavy duty Grade 1 unit, while the 4510 and 4530 are both standard duty Grade 1 at the same door thickness.
6) Is the BEST 6KL deadlocking latch a substitute for the Codelocks CL-DBDL?
They are not interchangeable. The BEST 6KL is a Grade 2 deadlocking latch of steel construction in the 6K Series, intended for BEST cylindrical lock openings. The CL-DBDL is a Codelocks replacement dual backset deadlatch in zinc alloy with a stainless steel finish, sized to serve as the latch for a Codelocks unit. Match the latch to the lock body it came out of rather than crossing brands.
7) What is this Codelocks deadlatch made of and will it hold up in a high-traffic entry?
The lock body is zinc alloy with a stainless steel finish, and Codelocks lists it for commercial use on both interior and exterior openings. For heavy-duty commercial entrances where you want a graded latch, the Adams Rite 4300 Series electrified deadlatch is a Grade 1, heavy duty option.
How fast can I get the Codelocks DBDL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Codelocks DBDL come with a warranty?
Absolutely. The Codelocks DBDL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Codelocks DBDL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Codelocks DBDL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.