Ball Tip for 6" x 6" Hinges
Deltana Solid Brass finials are available in an array of fine finishes. the DSBTL model fits our 6 inch Solid Brass Hinges.
- U/M (Unit of Measure): each - (Price displayed is per unit)
- Height: 3/4"
- Diameter: 5/8"
- Material: Solid Brass
- Thread: 10 x 1mm
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Subcategory:
- Hinges and Pivots
- Product Group:
- Door Hinges and Pivots
- Product Type:
- Hinge Tips and Finials
- Product Subgroup:
- Parts and Accessories
- Commercial/Residential:
- Commercial
- Bearing Type:
- Plain Bearing
- Non-Removable Pin (NRP):
- No
- Series:
- DSB6 Series
- MAP Policy:
- Yes
- Product Model:
- DSBTL
- Product Size:
- 6" x 6"
- Product Dimension:
- 6" x 6"
- Product Material:
- Brass
- Product Category:
- Door Trim & Accessories
- Product Substrate:
- Brass
- Department:
- Door Hardware
Deltana DSBTL10B – Frequently Asked Questions
1) Is the DSBTL finial sold as a pair or individually?
Each finial is sold individually. A hinge takes two tips (top and bottom of the pin), so order two per hinge, or four per door if you are dressing a pair of hinges.
2) What finishes does the Deltana DSBTL ball tip come in so I can match my existing hinges?
Nine finishes: PVD Polished Brass, Polished Brass, Unlacquered Brass, Antique Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, Polished Chrome and Brushed Chrome. Order the same finish code as the hinge body. Unlacquered brass will darken over time, and PVD polished brass holds its shine longer than standard lacquered polished brass.
3) Can I swap a flat button tip for a ball tip on my existing Deltana 6 inch hinges without pulling the door?
Yes, as long as the hinge is a Deltana 6 inch solid brass hinge with the 10 x 1mm threaded pin. The tips unscrew from the pin ends, so you change the look without removing the pin or taking the door down. Note the DSBTL is for standard removable-pin hinges, not a non-removable-pin (NRP) setup.
4) What thread does the Deltana DSBTL hinge finial use?
It threads on 10 x 1mm. That is the metric thread on the Deltana DSB6 Series 6 inch solid brass hinge pins, so the tip screws directly onto the top and bottom of the pin with no adapter.
5) How big is the Deltana DSBTL ball tip once it is installed?
The ball stands 3/4 inch tall and is 5/8 inch in diameter. That adds about 3/4 inch above the top of the hinge barrel, which matters if your door has tight head clearance or a casing that runs close to the hinge.
6) Is the Deltana DSBTL finial solid brass or plated pot metal?
Solid brass through the body, with the finish applied over it. That matters on a high-traffic opening where a plated zinc tip would chip at the edges; the brass takes the knocks and can be polished.
How fast can I get the Deltana DSBTL10B delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Deltana DSBTL10B come with a warranty?
Absolutely. The Deltana DSBTL10B is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Deltana DSBTL10B?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Deltana DSBTL10B from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.