Deltana SSP2410 24" Contemporary Pull, Single Side

Single side means one pull, mounted on one face of the door. If you want a matching pull on both faces (typical on a glass entry where you pull from outside and push from inside), you order the back-to-back version rather than two single-side units, because the mounting hardware differs. For a single-face application, one SSP2410 is the whole job.

The Deltana SSP2410 is a straight contemporary pull with a 1 inch thickness in stainless steel, offered in Paint Black, Polished Stainless and Brushed Stainless. The nearest straight-bar equivalents are the ABH AB3300 straight flat end pull handle at 1.00 inch diameter, and the Ives 8103HD heavy duty straight door pull, a 1 inch round bar with through bolt mounting. All three give you the same straight-bar profile at the same 1 inch grip diameter; the ABH AB3300 and the Ives 8103HD are commercial pulls specified by diameter, while the SSP2410 is sold as a finished contemporary pull in a stainless finish range.

The Deltana SSP2410 is a straight single side pull with a 1 inch thickness. When the opening needs measured hand clearance behind the bar, the Ives 8102HD heavy duty straight door pull is built on a 3/4 inch round bar with 1-1/2 inch clearance. If the grip needs to sit off the door at an angle instead, the Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware, and the Ives 8169 is a C style offset solid pull at 1 inch diameter. The offset pulls change the approach angle of the hand; the SSP2410 keeps a straight vertical bar.

The Deltana SSP2410 is a 24 inch contemporary stainless steel pull for commercial use, supplied for door thicknesses of 1-3/8 inch to 1-7/8 inch. Where the submittal calls out ADA compliance by name, the Ives 8145EZHD is the pull in the set carried as ADA compliant, a 45 degree offset pull in the EZ series with heavy duty mounting hardware. Specify the 8145EZHD when the drawing requires the compliance callout, and the SSP2410 when the 24 inch contemporary straight bar is what the elevation shows.

The pull is 1 inch thick and 24 inches long, so it gives a slim contemporary profile with enough hand room for a gloved grip. That 1 inch bar matches the diameter of common commercial round pulls like the ABH AB3300 and the Ives 8103HD, so it will not look undersized next to existing hardware in the same building.

Three: Brushed Stainless, Polished Stainless, and Paint Black. Brushed is the usual choice when you are matching existing commercial hardware, polished for a brighter storefront look, and paint black for dark-framed glass entries.

It is a commercial pull, built from solid stainless steel throughout, which is why it holds up in entry traffic rather than just on an interior residential door.

No. Deltana builds the Contemporary Stainless Steel pull in three lengths, and the SSP2410 is the 24 inch one. If 24 inches is too long for your stile or too short for the look you want on a tall glass entry, one of the other two lengths in the same series will carry the identical profile and finish, so a building can mix lengths without a finish mismatch.

The SSP2410 is a straight contemporary bar. Offset pulls such as the ABH AB3310 flat end offset and the Ives 8169 C style offset put a bend in the handle, which buys knuckle clearance where the pull sits close to a frame or a mullion. On a flush glass or wood door with open face space, the straight bar is the cleaner install. If you need documented ADA compliance on the pull itself, the Ives 8145EZHD offset is the one in that group carrying that claim.

The SSP2410 is a full 24 inch entry pull and it is the wrong shape for those jobs. For a restroom door where the user grips with a forearm or a towel, the Trimco 1035 Ultimate Restroom Pull is the purpose-built part. For a cylinder pull over a night latch, look at the Cal-Royal PUL-175, a 3-1/2 inch high stainless night latch cylinder pull.

Two items sit close to the Deltana SSP2410 in the pull family and do something different. The Cal-Royal PUL-175 is a night latch cylinder pull at 3-1/2 inch height in stainless steel, a pull built around a rim cylinder rather than a door grip. The Trimco 1035 Ultimate restroom pull is a heavy duty pull for restroom door use, and the Trimco 1041 half round push plate at 8 by 16 inches is a push side plate, not a pull at all. The SSP2410 is a 24 inch stainless steel grip pull, single side, for door thicknesses of 1-3/8 inch to 1-7/8 inch.

The Deltana SSP2410 is the 24 inch length of the contemporary stainless steel pull family, which is built in three lengths. When the opening calls for a length outside that, the ABH AB3330 series offset round end pull is offered with custom length options. The AB3330 is an offset round end profile rather than the straight bar of the SSP2410, so confirm the elevation accepts the offset before you standardize a building on it.

Stainless steel is both the material and the substrate, so the polished and brushed versions are the metal itself, not a plating over a base metal. That matters on an exterior entry where a plated finish would eventually wear through at the grip point. The Paint Black version is a coating over that same stainless body.

Probably not. The SSP2410 is a 24 inch straight stainless bar in a contemporary profile. The Emtek pulls ZenSupply carries in this range, Art Nouveau, Arts and Crafts, Baden, and Brisbane, are 8 inch decorative pulls, a different length class and a different design language. If you are matching existing Emtek trim, stay in the Emtek series; if you are specifying new contemporary hardware, the Deltana is the straight-bar option.

The Deltana SSP2410 is supplied single side, so the back of the door is left to a separate plate. The Trimco 1001-1 heavy duty push plate at 3 by 12 inches and the Trimco 1041 half round push plate at 8 by 16 inches both cover the push face, and the Trimco 1070 series classic push and pull plates at 3-1/2 by 15 inches pair a push and pull plate in one series for both faces of the leaf. Pick the plate size against the door stile width before ordering.

The ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter, and the ABH AB3310 is the offset flat end door pull in commercial grade surface mount. Ordering the AB3300 and AB3310 together lets you keep one flat end look across doors that need a straight bar and doors that need an offset. The Deltana SSP2410 is the straight contemporary pull at 24 inches and 1 inch thickness, matched to the same 1 inch grip as the AB3300.