Deltana SSP1210 12" Contemporary Pull, Single Side

It does. Deltana Contemporary Stainless Steel pull kits include the installation hardware required for glass and wood doors, so a glass front installer does not have to source separate through-bolts or gaskets to hang it. Note the SSP1210 is the single side version, meaning one pull mounted on one face of the door, not a back to back pair.

Single side means the SSP1210 mounts on one face of the door only. Use it where the other face gets a push plate or a panic device, which is the usual storefront and entry setup. If you want a pull on both faces, mounted through the door in a matched pair, you need the back to back version rather than this one. Both faces of a glass door pulled at once is a back to back job.

For a high traffic opening where the pull takes abuse, the Ives 8103HD is a heavy duty straight pull with a 1 inch round bar and through bolt mounting, and the Ives 8102HD is the heavy duty straight pull with a 3/4 inch bar and 1-1/2 inch hand clearance. The Deltana SSP1210 is the flatter contemporary stainless profile; the Ives heavy duty pulls are the round bar answer where the spec calls for a heavier grip. If the drawing calls for an offset, the Ives 8145EZ is the 45 degree offset version.

No. The SSP1210 is a plain 12 inch grab pull with no cylinder cutout. A night latch pull has a hole and a raised boss to carry the rim cylinder on a storefront door, and for that you want the Cal-Royal PUL-175 night latch cylinder pull, 3-1/2 inches high in stainless steel. Fitting the Deltana over an existing cylinder is not something it is cut for.

Both. The kit ships with the installation hardware needed for glass and wood doors, so the same 12 inch pull covers an aluminum framed glass entry and a solid wood door on the same job, as long as the leaf falls between 1-3/8 and 1-7/8 inches thick.

The ABH AB7200 is the nearest straight-bar equivalent: a solid stainless steel flat end pull handle in 7/8 inch diameter with through-bolt mounting. The Deltana SSP1210 is a 12 inch stainless steel contemporary pull in single-side configuration with a 1 inch thickness, so the two are close in material and profile, with the AB7200 running a 7/8 inch bar and using through-bolt mounting. The ABH AB3300 is another straight flat end commercial door pull at 1.00 inch diameter if you want to match the Deltana's 1 inch section more exactly.

The Deltana SSP1210 is a straight 12 inch contemporary pull, so for an offset shape look at the ABH AB3310 offset flat end door pull, which is a commercial grade surface mount, or the ABH AB3330 offset round end pull, which is offered with custom length options. The Ives 8169 is a C style offset solid door pull in 1 inch diameter with heavy duty mounting, and the Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware and is ADA compliant.

The Deltana SSP1210 is the one built for it: the Deltana Contemporary stainless steel pull kits include the installation hardware required for glass and wood doors, and the SSP1210 is the 12 inch single side version in stainless steel. The comparable commercial pulls are specified for through-bolt or surface mounting on standard doors, such as the ABH AB7200 with through-bolt mounting, the ABH AB3310 commercial grade surface mount, and the Ives 8103HD with through bolt mounting, so they do not carry the glass door hardware the Deltana kit does.

The Deltana SSP1210 is a plain 12 inch contemporary pull with no cylinder provision; it mounts single side on doors 1-3/8 inch to 1-7/8 inch thick. For an opening where the cylinder passes through the pull, the Cal-Royal PUL-175 is a night latch cylinder pull at 3-1/2 inch height in stainless steel construction, which is a short cylinder-prepped pull rather than a full-length grasping bar.

The Ives 8145EZHD 45 degree offset door pull is listed as ADA compliant and ships with heavy duty mounting hardware. The Deltana SSP1210 is a 12 inch stainless steel contemporary pull for commercial openings with a 1 inch thickness, sold in Paint Black, Polished Stainless, and Brushed Stainless. If the ADA callout is on the drawing, the 8145EZHD is the one in the group that states it.

The SSP1210 has a 1 inch thickness on a 12 inch overall length, giving a slim contemporary profile rather than the bulky offset grip you get on a heavy duty pull. That matters on a narrow stile aluminum door where a deep pull can foul a closer arm or a jamb return.

Commercial. The SSP1210 is a solid stainless steel pull, stainless right through the substrate rather than a plated finish over a softer core, which is what holds up on a door cycled all day and cleaned with commercial product. Stainless is also the material to specify near a coastal or washroom environment where a brass or bronze pull will discolour.

Deltana's Contemporary Stainless Steel pulls run in three lengths, and the SSP1210 is the 12 inch. For a property manager standardizing a fleet of doors, that lets you keep one family and one finish across entries of different heights and stile widths while the look stays consistent. Order the 12 inch by model SSP1210.

The Deltana Contemporary line covers three lengths and the SSP1210 is the 12 inch. If the opening needs a length outside that family, the ABH AB3330 Series offset round end pull is offered with custom length options, which is the route to take when the drawing calls for a pull dimension that stock lengths do not cover. ABH also lists the AB3300 straight flat end pull at 1 inch diameter and the AB7200 solid stainless flat end pull at 7/8 inch diameter with through bolt mounting.

They do different jobs on the door. The Deltana SSP1210 is a grasping pull, single side, 12 inches long in stainless steel. The Trimco 1001-1 is a heavy duty push plate measuring 3 inches by 12 inches and the Trimco 1041 is a half-round push plate at 8 inches by 16 inches, both flat plates for the push side. If you want both actions on one opening, the Trimco 1070 Series classic push/pull plates at 3-1/2 inches by 15 inches combine the pull and plate into one piece, which the SSP1210 does not do.

The ABH AB3330 Series offset round end pull is offered with custom length options. The Deltana SSP1210 is fixed at 12 inches, though the Deltana Contemporary stainless steel pulls are made in three lengths. If the opening needs a length outside those, the AB3330 is the one in the group that is built to a specified length, with the tradeoff that it is an offset round end shape rather than the SSP1210's straight contemporary profile.

The Trimco 1035 Ultimate Restroom Pull is the purpose-built restroom part, carrying a heavy duty designation. The Deltana SSP1210 is a general purpose 12 inch stainless steel contemporary pull for commercial openings and is not configured specifically for restroom use. For a restroom door that also needs a night latch cylinder, the Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, in stainless steel construction.

The Deltana SSP1210 has a 1 inch thickness. Among the comparables, the ABH AB3300 straight flat end pull is 1.00 inch diameter and the Ives 8169 C style offset pull is 1 inch diameter, so both grip the same as the Deltana. The ABH AB7200 runs a 7/8 inch diameter bar and the Ives 8102HD uses a 3/4 inch round bar with 1-1/2 inch clearance, which are slimmer sections.