Deltana SSP4215 42" Extra Large Contemporary Pull, Single Side

No. The SSP4215 is built for a 3-1/2 inch door thickness, which is what its mounting hardware is sized to. On a standard 1-3/4 inch commercial door or a 1-3/8 inch interior door, the fasteners will be far too long. For a normal-thickness door, an Ives 8103HD straight pull with through-bolt mounting or an ABH AB7200 solid stainless pull is the right direction.

Center to center is 42 inches, overall length 43-1/2 inches. That gives you 3/4 inch of material past each mounting point, so lay out your two bores 42 inches apart and allow 43-1/2 inches of clear stile height for the pull itself. Grip bar is 1-1/2 inches thick.

Single side. You get one 42 inch pull for one face of the door. Deltana offers the extra large contemporary pulls in back-to-back kits as well, so if you need matching pulls on both faces of a glass or entry door, order the back-to-back version rather than two singles, since the through-bolt hardware differs.

The Deltana SSP4215 is a stainless steel contemporary pull with 42 inch center to center spacing and a 43-1/2 inch overall length, sold as a single side unit. If a round bar section suits the door better, the Ives 8103HD is a heavy duty straight door pull with a 1 inch round bar and through bolt mounting, and the Ives 8102HD is a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance. Both Ives pulls are straight-run pulls like the SSP4215; the difference is bar shape and diameter rather than the pulling action.

The SSP4215 is built for larger doors at 42 inch center to center and 43-1/2 inch overall. For a standard leaf where that length overruns the stile, the ABH AB7200 is a solid stainless steel flat end pull handle in 7/8 inch diameter with through-bolt mounting, and the ABH AB3300 is a straight flat end commercial door pull in 1 inch diameter. The ABH AB3330 series offers custom length options with an offset round end, which lets the pull be sized to the opening rather than taking a fixed 42 inch run.

The Ives 8145EZHD is a 45 degree offset door pull with heavy duty mounting hardware and is described as ADA compliant in the EZ series. The Deltana SSP4215 is a stainless steel contemporary pull specified for commercial use with 42 inch center to center spacing, and its published data covers dimensions, material and door thickness rather than an accessibility designation. Where the drawing calls out an ADA pull by name, specify the 8145EZHD.

Two: Paint Black and Brushed Stainless. Brushed Stainless is the one that matches typical US32D satin stainless hardware already on commercial openings, so that is the choice if you are adding a pull to a building that is already standardized on satin stainless. Paint Black is the option for dark storefront and contemporary entry packages.

Stainless steel throughout, both the material and the substrate. Stainless is the usual choice for exterior entrances and high-traffic lobbies because it does not rust like plated steel and takes constant hand contact without wearing through a coating. The Brushed Stainless finish shows fingerprints less than a polished one on a door touched all day.

Commercial. Deltana lists the extra large contemporary pulls as the heavy duty alternative for larger doors, in stainless steel, which is why it turns up on office and institutional entrances rather than interior residential doors. If you need a commercial pull in a smaller size, the Ives 8102HD and 8103HD are heavy duty straight pulls and the ABH AB3300 is a 1 inch diameter straight flat end commercial pull.

The SSP4215 is a contemporary straight bar pull, 1-1/2 inches thick, 42 inches center to center. If your opening calls for an offset shape (common where the pull has to clear a frame or where an angled grip is specified), look at the ABH AB3310 flat end offset, the ABH AB3330 round end offset, the Ives 8169 C style offset, or the Ives 8145EZHD 45 degree offset.

The SSP4215 is a straight contemporary pull, 1-1/2 inch thick stainless bar with 42 inch center to center, mounted single side. The Ives 8169 is a C style offset solid door pull in 1 inch diameter with heavy duty mounting, and the ABH AB3310 is an offset flat end door pull for surface mount commercial use. An offset pull carries the grip away from the door face on angled returns, while the SSP4215 runs parallel to the face along its full 43-1/2 inch length - a difference in grip standoff geometry, not in duty.

No - those are plates, not bar pulls. The Trimco 1070 series is a classic push/pull plate at 3-1/2 inch by 15 inch and the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch; both mount flat against the door face. The Deltana SSP4215 is a 1-1/2 inch thick stainless bar standing off the door with a 42 inch center to center grip. A door prepped for the SSP4215 has two through-bolt points 42 inches apart, which a 15 inch plate will not span or cover.

No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, stainless steel construction - a short pull built around a cylinder for night latch service. The Deltana SSP4215 is a 42 inch center to center stainless pull with a 1-1/2 inch thick bar and no cylinder provision. If the door needs both a cylinder pull and a long grip, they are two separate pieces of hardware.

No handing on the SSP4215. It is a symmetrical straight bar, 42 inches center to center with a 43-1/2 inch overall, so the same part works on a left or right hand door and on either leaf of a pair. All you specify is the finish, Paint Black or Brushed Stainless. Handed pulls do exist in decorative lines, the Emtek Art Nouveau 8 inch pull is ordered by hand, but that is not the case here.

They are different halves of the same opening. The Trimco 1041 is a heavy duty half-round push plate at 8 inch by 16 inch, mounted on the push side. The Deltana SSP4215 is a single side pull with 42 inch center to center spacing, mounted on the pull side of the leaf. On a pair, a push plate and a long pull are commonly specified together rather than one replacing the other.

The Trimco 1035 Ultimate Restroom Pull is a heavy duty pull made specifically for restroom doors. The Deltana SSP4215 is a stainless steel commercial pull at 42 inch center to center, sized as the heavy duty option for larger doors, so on a standard restroom leaf it is longer than the application calls for. Where the specification is a restroom opening, the 1035 is the purpose-built choice.

The Deltana SSP4215 is stainless steel in Paint Black and Brushed Stainless, at 42 inch center to center for larger doors. For the shorter openings in the same building, the ABH AB7200 is solid stainless steel with through-bolt mounting, the Cal-Royal PUL-175 is stainless steel construction for night latch cylinder locations, and the ABH AB3330 series allows custom lengths so intermediate doors can be matched to a single profile family. That gives a stainless program across long, short, and cylinder-pull openings.