Design Hardware X76 Privacy Le...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$167.82
$83.26
Design Hardware X75 Passage Lever Lockset, Flat Lever

Design Hardware X76 Privacy Lever Lockset, Flat Lever

(No reviews yet) Write a Review

Model: DH-X-76-F-26D
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$167.82
$83.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
DESIGN HARDWARE  X SERIES LOCKSET
 

Specifications:

ANSI: Meets ANSI - A156.2, Series 4000, Grade 1 Standards
UL Listings: UL Listed for “A” Label 3 Hour Fire Doors
ADA Compliance: Meets ADA and ANSI A117.1 accessibility codes
Lock Chassis: Steel, Zinc dichromated for corrosion resistance
Clutching: Clutching levers standard for vandal resistance on locking functions
Trim: 5” Solid zinc diecast levers, 3 3/8” wrought brass roses
Lever Return: Anti-sag mechanism with independent lever return springs to prevent lever sag
Handing: Non-handed - Completely reversible (S-A & S-B lever styles are handed)
Backset & Latchface: 2-3/4” backset std. with 1-1/8” x 2-1/4” latchface, 2-3/8” backset is available with 1” x 2-1/4” latchface both with self adjusting front for square or beveled edge doors
Latchbolt: Stainless Steel with 1/2” projection, Deadlocking on keyed functions & exit latch
Cylinder Options: 6 Pin Brass, C Kwy, with 2 Keys std, Prepared for Small format IC core (less core)
Strikes: 4-7/8” x 1 1/4” ASA standard - T strike & Full lip strikes available
Door Preparation: ANSI A115.2 - 2-1/8” crossbore with (2) 3/8” thru bolt holes
Door Thickness: Factory Set for 1 3/4” - 1 3/8” require shims, can be adjusted to fit up to 2” thick
Lever Designs: Flat (standard, shown above), Curved, Half Curved, S-A & S-B
Standard Finishes: US3 PVD*, US4, US10B, US15, US26 PVD*, US26D (PVD = Lifetime Finish)
Marine Grade Option: Marine Grade 316 Stainless steel lever and rose cover upgrade available
Fasteners: Combination screws for wood or metal doors & frames
Warranty: Limited lifetime warranty

 

RESOURCES & DOWNLOADS

Installation Instruction

Template

Manufacturer Resources

Product Specs

Series:
X Series
Features:
Clutching Levers Standard for Vandal Resistance on Locking Functions, Anti-Sag Mechanism With Independent Lever Return Springs to Prevent Lever Sag
Grade:
Grade 1
Keyed Function:
Non-Keyed
ANSI/BHMA:
ANSI A156.2, UL Listed
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Product Type:
Leversets
Subcategory:
Lever Lockset
Keyed:
No
Commercial/Residential:
Commercial
Handle Type:
Lever
Lock Function:
Privacy
Product Attribute:
Cylindrical Locks
Product Function:
Privacy/Bed/Bath
Door Thickness Range:
1-3/4"
Latch Specification:
Deadlocking
Door Strike:
1-1/4" x 4-7/8", ASA Strike, Square Corner
Product Category:
Mechanical Locks
Backset (Distance):
2-3/4"
Department:
Door Hardware

Design Hardware DH-X-76-F-26D – Frequently Asked Questions

1) What door prep does the Design Hardware X76 lever lockset need?
Standard ANSI A115.2 prep: a 2-1/8 inch crossbore plus two 3/8 inch thru-bolt holes. Backset is 2-3/4 inches standard with a 1-1/8 x 2-1/4 inch latchface, and a 2-3/8 inch backset version is offered with a 1 x 2-1/4 inch latchface. The front is self-adjusting, so it seats on either a square or a beveled door edge without ordering a separate latch.
2) Will the X76 privacy lever latch into the strike already in my frame?
If the frame has the common ASA prep, yes. The X76 ships with a 1-1/4 x 4-7/8 inch ASA square corner strike, which is the standard commercial hollow metal frame cutout, and the stainless latchbolt has a 1/2 inch projection. T strikes and full lip strikes are also available if the existing cutout is a different shape. If your frame is prepped for a small radius corner residential strike, the frame will need to be modified.
3) Do I have to specify handing on the Design Hardware X76 lever?
Not with the flat lever. The X76 is non-handed and completely reversible, so one part number works on a left or right hand door. Handing only becomes a question if you switch to the S-A or S-B lever styles, which are handed. Curved and half curved levers are also offered and, like the flat, are non-handed.
4) Can a privacy lever be used on a fire rated door?
The X76 is UL Listed for A label 3 hour fire doors and meets ANSI A156.2 Series 4000 Grade 1. Privacy function has no keyed cylinder, so on a bed or bath opening inside a rated corridor assembly it is the right choice. It is non-keyed, so it is not a substitute anywhere the door must be secured against entry.
5) Will the X76 drop into the holes left by an old Grade 2 lever without redrilling?
If the old lock was a standard cylindrical lockset on a 2-3/4 inch backset with a 2-1/8 inch crossbore, the X76 goes into the same prep. Watch two things: the 2-3/4 inch backset is standard here and a 2-3/8 inch backset is a separate order, and the 3-3/8 inch rose has to cover whatever the previous rose left behind. Sets like the Cal-Royal AG00 and Kwikset 200BRNL use a 2-3/8 inch backset, so an opening bored for one of those wants the 2-3/8 version of the X series latch.
6) Is the Design Hardware X76 ADA compliant for a restroom door?
The X76 meets ADA and ANSI A117.1 accessibility codes. It is a lever, not a knob, so it operates without grasping or twisting, and the 5 inch solid zinc diecast lever sits on a 3-3/8 inch wrought brass rose. That combination is what an inspector looks for on a public restroom or bed and bath opening.
7) How well does a Grade 1 privacy lever hold up in an apartment building or dorm?
The X76 is built for that traffic. Grade 1 to ANSI A156.2 Series 4000, a steel chassis that is zinc dichromated against corrosion, and an anti-sag mechanism with independent lever return springs so the lever does not droop after a few years of use. Clutching levers are standard on locking functions, so forcing a locked lever spins it rather than breaking the chassis. There is also a marine grade 316 stainless lever and rose cover upgrade for coastal or pool area openings.
8) Should I use a privacy lever or a passage lever on a bathroom door?
Privacy is the one with the inside push button or turn and an emergency release outside. The X76 is the privacy or bed and bath function, non-keyed. If the door just needs to latch with no locking at all, such as a hall or closet, a passage function is what you want instead, like the Corbin Russwin CL3110 in Grade 1 or the Falcon K101 Grade 1 passage lever. Neither of those locks; both simply retract the latch from either side.
9) What is a comparable Grade 1 privacy lock to the Design Hardware X76?
For a knob instead of a lever in the same function, the Arrow MK02-TA is a Grade 1 privacy bed and bath cylindrical lock with a Tudor knob, fire rated, for 1-3/4 to 2 inch doors. On the lighter side, the Hager 2540 is a Grade 2 privacy with the Withnell lever for 1-3/8 to 2 inch doors, and the Kwikset 300BRNL Breton is a Grade 3 privacy lever for 1-3/8 to 1-3/4 inch doors. The X76 is the Grade 1 lever version, and a knob will not meet ADA where a lever is required.
10) I need to match X series levers across a building but some doors need keys. What else is in the line?
The X series shares the same chassis, trim and lever designs across functions, so a keyed function in the series will match the X76 privacy visually on adjacent openings. Keyed X series functions use a 6 pin brass cylinder in the Schlage C keyway with two keys standard, and are also prepped for a small format interchangeable core less core if the building is on an SFIC system. The X76 itself is non-keyed.
11) Does the X76 lockset work on a metal door, and are screws included?
Yes on both counts. Combination screws for wood or metal doors and frames come with the lockset, so a hollow metal door with a 2-1/8 inch crossbore and two 3/8 inch thru-bolt holes needs nothing extra in the way of fasteners. It is a commercial rated set, not a residential one.
How fast can I get the Design Hardware DH-X-76-F-26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Design Hardware DH-X-76-F-26D come with a warranty?
Absolutely. The Design Hardware DH-X-76-F-26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Design Hardware DH-X-76-F-26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Design Hardware DH-X-76-F-26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!