Specifications:
ANSI: Meets ANSI - A156.2, Series 4000, Grade 1 Standards
UL Listings: UL Listed for “A" Label 3 Hour Fire Doors
ADA Compliance: Meets ADA and ANSI A117.1 accessibility codes
Lock Chassis: Steel, Zinc dichromated for corrosion resistance
Clutching: Clutching levers standard for vandal resistance on locking functions
Trim: 5" Solid zinc diecast levers, 3 3/8" wrought brass roses
Lever Return: Anti-sag mechanism with independent lever return springs to prevent lever sag
Handing: Non-handed - Completely reversible (S-A and S-B lever styles are handed)
Backset and Latchface: 2-3/4" backset std. with 1-1/8" x 2-1/4" latchface, 2-3/8" backset is available with 1" x 2-1/4" latchface both with self adjusting front for square or beveled edge doors
Latchbolt: Stainless Steel with 1/2" projection, Deadlocking on keyed functions and exit latch
Cylinder Options: 6 Pin Brass, C Kwy, with 2 Keys std, Prepared for Small format IC core (less core)
Strikes: 4-7/8" x 1 1/4" ASA standard - T strike and Full lip strikes available
Door Preparation: ANSI A115.2 - 2-1/8" crossbore with (2) 3/8" thru bolt holes
Door Thickness: Factory Set for 1 3/4" - 1 3/8" require shims, can be adjusted to fit up to 2" thick
Lever Designs: Flat (standard, shown above), Curved, Half Curved, S-A and S-B
Standard Finishes: US3 PVD*, US4, US10B, US15, US26 PVD*, US26D (PVD = Lifetime Finish)
Marine Grade Option: Marine Grade 316 Stainless steel lever and rose cover upgrade available
Fasteners: Combination screws for wood or metal doors and frames
Warranty: Limited lifetime warranty
RESOURCES and DOWNLOADS