You may also like
DynaLock 7000 Series Keyswitches
Model 7035 Electronic Time Delay, 0-60 Sec., SPDT, Two-Gang
Keyswitches may be used to control electric locks, shunt or activate security
panels, consoles or any similar requirements. The assembly is supplied with
face plate, bracketry, cylinder locknut and one or two switches depending on
model ordered. The user typically supplies the mortise cylinder and cam when
master keying a system.
Switch contacts rated 6 Amps @ 125VAC and are available momentary or
maintained, SPDT or DPDT. Switch assembly requires 1-1/2” depth clearance
and is shipped on single, double or narrow gang plates.
Standard Finish: US32D
Cylinder Requirements: 1-1/8” or 1-1/4” Mortise Cylinder with “bat” type cam.
Standard Features
• Compatibility: Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam.
• Multiple Switch Functions: Switches are available in momentary or maintained functions, with single or double pole contacts and may be ordered in varying combinations.
• Maintained Contact: Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position.
• Momentary Contact: Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position.
• Tamper Resistant: All visible screws are spanner head.
• Heavy-Duty Switching: Switch capacity 6 amps at 125 volts.
• Factory Prewired Switches: Are shipped with 6” long factory wired color-coded 18 ga. leads.
• Standard Finish: US32D Brushed Stainless Steel
Manufacturer Resources
Product Specs
- Subcategory:
- Key Switches
- Series:
- 7000
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Sensors, Switches, Relays and Timers
- Product Type:
- Switches / Push Buttons
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Duty Level:
- Heavy Duty
- Product Model:
- 7035
- Product Finish:
- Brushed Stainless Steel (US32D)
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
DynaLock 7035 – Frequently Asked Questions
1) Does the DynaLock 7035 keyswitch come with a mortise cylinder, or do I have to supply my own?
The cylinder is an ordering option on the 7035. The switch assembly ships with face plate, bracketry, cylinder locknut and the switch itself, and you can add a mortise cylinder as an option or leave it off. Most locksmiths leave it off and supply their own cylinder so the keyswitch keys into the building's existing master key system. If you do supply your own, it has to be a 1-1/8 inch or 1-1/4 inch long mortise cylinder fitted with a bat type cam.
2) How much depth do I need behind the wall for a DynaLock 7035 keyswitch?
Plan on 1-1/2 inches of clearance behind the plate for the switch assembly. That is the governing dimension on a hollow wall or a shallow back box, so check your box depth before you cut the plate in. The 7035 mounts on a two-gang plate.
3) What does the 0-60 second time delay on the DynaLock 7035 actually do?
Turning the key triggers an electronic time delay that holds the contact transferred for an adjustable interval anywhere from 0 to 60 seconds, then drops it back on its own. That is what you want on an unlock-to-enter or unlock-to-exit opening where nobody is going to come back and re-key the switch to relock the door. Contacts are SPDT, so you get one normally open and one normally closed leg off a common.
4) Can the 7035 keyswitch switch a maglock directly, or do I need a relay?
Contacts are rated 6 amps at 125VAC, which is well above the draw of a typical 12 or 24VDC electromagnetic lock, so the keyswitch can break lock power directly on most single-lock openings. Where you are switching a bank of locks, a fire alarm interface, or anything past that 6 amp rating, run the switch into a relay instead and let the relay carry the load.
5) What is the closest key-operated alternative to the DynaLock 7035 keyswitch?
The ACSI 1310-1 mortise keyswitch is the nearest key-operated peer. Like the DynaLock 7035, it is a mortise-cylinder keyswitch, so it relies on a cylinder turned by a key rather than a pushbutton to change switch state. The DynaLock 7035 accepts any standard 1-1/8 inch or 1-1/4 inch long mortise key cylinder fitted with a bat type cam, carries electronic time delay adjustable 0 to 60 seconds with SPDT contacts rated 6 amps at 125VAC, and comes in US32D brushed stainless steel. Confirm your cylinder length and cam style against whichever you specify.
6) If I do not need key control, what is a simpler switch to release an electric lock than the DynaLock 7035?
A pushbutton is the simpler route. The Securitron PB3 series push buttons and the Securitron PB5 medium round illuminated push button both actuate by hand with no cylinder to buy or key, and the RCI 950 series round push plate with handicap symbol is a momentary switch in satin stainless steel for barrier-free openings. The DynaLock 7035 differs in that it is keyed: the user typically supplies the mortise cylinder and cam, which is what makes it suitable when only keyholders should be able to operate the lock.
7) I need an emergency egress release, not a keyed switch. What should I use instead of the DynaLock 7035?
For egress, look at devices built and marked for that purpose: the Securitron EEB emergency exit push button with interchangeable LED lenses, or the ACSI 1320-1-MOM-ER pushbutton switch marked Emergency Release. The RCI 908 series electronic exit button carries red EXIT text and maintained operation. The DynaLock 7035 is a mortise keyswitch that requires a key to operate, so it is intended for authorized control of electric locks, security panel shunting or console functions rather than for free egress.
8) What options do I need to decide on before ordering a DynaLock 7035 keyswitch?
Four choices go on the order: whether to include an anti-tamper switch, whether to add the bi-color red/green LED (12/24VDC), whether you want the mortise cylinder supplied or will provide your own, and the two-gang plate. All sixteen combinations of those four are orderable, so you can spec it bare and key it yourself, or take it complete with cylinder, LED and tamper switch.
9) Is a keyswitch or a push button the right release for my door?
Use a keyswitch like the DynaLock 7035 where release has to be restricted to people holding a key, and where you want the opening to relock itself after a set interval. Use a push button where anyone on that side is allowed to release the door, typically an egress or ADA-access side. ZenSupply carries push-button alternatives including the Securitron PB3 and PB5, the RCI 950 round push plate with the handicap symbol, and the RCI 908 electronic exit button with red EXIT text. Those give no access control at all, so they belong on the free-egress side, not the secure side.
10) What else does ZenSupply carry if I want a mortise keyswitch from a different brand?
The ACSI 1310-1 mortise keyswitch from the 1300 Series is the cross-brand mortise keyswitch option. The Trine 342 is a narrow style electric door switch, which is the one to look at when the mounting location is too tight for a two-gang plate like the 7035 uses.
11) The DynaLock 7035 ships on a two-gang plate. What is a narrower switch for a tight frame or mullion?
The Trine 342 is a narrow style electric door switch, and the RCI 909 series is a flush mount momentary rocker switch rated 250VAC 10A in a beige finish, both of which suit tight mounting locations. The DynaLock 7035 switch assembly requires 1-1/2 inch depth clearance behind the plate and is shipped on single, double or narrow gang plates, with a two-gang plate available as an ordering option, so check both the width you have and the depth behind it before choosing.
12) Is a rotary release button like the RCI 919 the same thing as the DynaLock 7035 keyswitch?
No. The RCI 919 series rotary release button is turned by hand and is offered with maintained operation in a satin aluminum finish, so anyone at the door can operate it. The DynaLock 7035 also uses a rotary action, but through a mortise key cylinder the user supplies, and the key is removable in the vertical position, which restricts operation to keyholders. They look similar on the wall and are not interchangeable where key control is the requirement.
13) I want an illuminated status indication at the switch. How does the DynaLock 7035 compare to an illuminated pushbutton?
The Securitron PB4L series pairs an illuminated halo with a stainless push button, and the Securitron PB5 is a medium round illuminated push button. The DynaLock 7035 can be ordered with a bi-color red/green LED for 12/24VDC, so you can get lock status indication alongside keyed operation rather than choosing between them. The 7035 remains a keyed device requiring a 1-1/8 inch or 1-1/4 inch mortise cylinder with a bat type cam.
14) Which switch should I standardize on across a facility if tamper resistance matters?
The DynaLock 7035 is built for that duty: all visible screws are spanner head, an anti-tamper switch can be added as an ordering option, and it is a heavy duty commercial device finished in US32D brushed stainless steel. Among the peers, the Securitron PB3 push buttons and the RCI 950 round push plate are hand-operated devices with no key cylinder, so where you need the switch itself protected against removal and operation limited to keyholders, the 7035 is the one that addresses both.
15) What finish does the DynaLock 7035 keyswitch plate come in?
US32D brushed stainless steel is the standard finish, which is what matches most commercial lever trim, push plates and frames already in a building. All visible screws are spanner head, so the plate cannot be pulled with a common driver on the unsecure side.
16) Will the DynaLock 7035 hold up in a high-traffic building entrance?
It is a heavy duty commercial device, not a residential one. Contacts are rated for 6 amps at 125VAC, switches are factory prewired with 6 inch color-coded 18 gauge leads, and the plate uses spanner head screws throughout to resist tampering. For a property manager standardizing entrances across a portfolio, the US32D brushed stainless plate is the finish that matches most existing commercial trim.
How fast can I get the DynaLock 7035 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the DynaLock 7035 come with a warranty?
Absolutely. The DynaLock 7035 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the DynaLock 7035?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the DynaLock 7035 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.