You may also like
Eaton 95 Series Replacement Coil for Shoe Brake and Solenoid Assemblies
The Eaton 95 Series Replacement Coil is a renewal part engineered to restore Eaton shoe brake and solenoid assemblies to full working condition. Offered in a range of coil voltages to match rated equipment, it is designed as a direct-fit renewal accessory for Eaton motor control and brake assemblies. As a genuine Eaton replacement component, it helps maintain reliable, code-compliant operation of shoe brake and solenoid systems in industrial and commercial electrical equipment, making it a practical choice when an original coil has failed or worn out over time.
Key Features
- Matched Voltage Rating: Available in coil voltages selected for compatibility with rated shoe brake and solenoid assemblies.
- Proper Fit: Dimensioned to seat correctly within the applicable brake and solenoid housing.
- Renewal Part: Classified as a Renewal Parts/Accessories item, purpose-built to replace a worn or failed original coil.
- Direct Compatibility: Designed as a replacement coil for compatible Eaton shoe brake and solenoid assemblies.
- 95 Series Design: Part of the Eaton 95 Series coil lineup used across compatible brake and solenoid assemblies.
- Simple Servicing: Sized and rated to swap in place of the original coil, helping minimize downtime during motor control maintenance.
Technical Specifications
- Warranty: Not Applicable
- Product Type: Coil
- Type: Renewal Parts/Accessories
- Series: 95 Series
- Compatible Equipment: Eaton Shoe Brake and Solenoid Assemblies
Typical Applications
- Replacement and Renewal of Eaton Shoe Brake Coils
- Solenoid Coil Replacement on Compatible Solenoid Assemblies
- Industrial Motor Control and Brake Maintenance
- Panelboard and Motor Starter Servicing
- Commercial and Industrial Electrical Maintenance Programs
- Preventive Maintenance on Eaton 95 Series Equipment
Why Eaton?
Eaton renewal parts are built to match the original fit, form, and electrical rating of the equipment they service, helping ensure your shoe brake and solenoid assemblies continue operating reliably after replacement. Choosing a genuine Eaton 95 Series coil, matched to the original voltage and dimensional specification, supports consistent, code-compliant performance for professional electrical and industrial maintenance work.
Variant Specifications
| Coil Voltage | Model | SKU | MPN |
|---|---|---|---|
| 208V/60Hz | 958517 | 9-585-17 | 958517 |
| Other voltages (95853, 95911) | 95853 | 9-585-3 | 95853 |
| Other voltages (95853, 95911) | 95911 | 9-591-1 | 95911 |
Manufacturer Resources
Product Specs
- Department:
- Electrical
- Product Type:
- Coil
- Certifications:
- Not Applicable
- Warranty:
- Not Applicable
- Product Length/Depth:
- 3 in
- Product Group:
- Circuit Protection
- Product Subgroup:
- Circuit Breakers
- Product Length:
- 3 in
Eaton 9-591-1 – Frequently Asked Questions
1) Will this Eaton 95 Series coil fit my 511 shoe brake or 10370 solenoid?
It is sold as a renewal coil for Eaton shoe brake and solenoid assemblies, including the 511 shoe brake and 10370 solenoid, and is dimensioned to seat in the applicable housing. Match the voltage by model (958517 for 208V/60Hz, otherwise 95853 or 95911) rather than assuming any 95 Series coil drops in.
2) I have a 208V control circuit on an Eaton shoe brake, which coil do I order?
The 958517 is the one rated 208V at 60Hz. Ordering 95853 or 95911 instead gets you a different voltage coil, and a voltage mismatch on a brake coil either fails to pick up or burns out.
3) Can a Square D Type S replacement coil be used in place of an Eaton 95 Series coil on a 511 shoe brake?
No. The Eaton 95 Series coil is a renewal part dimensioned to seat in Eaton shoe brake and solenoid assemblies, and it is sold in models 95853, 95911 and 958517. The Square D Type S replacement coil, 31041400 series, is built for Square D Type S magnetic starters in NEMA size 00, 0 and 1. The two are different coil families for different magnet assemblies, so match the coil to the brand and assembly it is going into rather than crossing between them.
4) Is the Eaton 95 Series coil a genuine Eaton part or an aftermarket copy?
It is a genuine Eaton renewal part, built to match the fit, form, and electrical rating of the original coil in Eaton motor control and brake assemblies. That matters on maintenance work where the panel has to stay as originally specified.
5) What kind of maintenance work is the Eaton 95 Series coil used for?
It is a renewal item for industrial and commercial electrical maintenance: replacing a failed or worn coil on an Eaton shoe brake, swapping a solenoid coil on a compatible solenoid assembly, and servicing motor starters and motor control gear during scheduled preventive maintenance.
How fast can I get the Eaton 9-591-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton 9-591-1 come with a warranty?
Absolutely. The Eaton 9-591-1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton 9-591-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Eaton 9-591-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.