B-Line Eaton series panels and panel accessories, 1 rated, White powder coated steel, JIC flat perforated panel

No. NEMA 1 is indoor, general purpose only, offering protection against incidental contact and falling dirt with no rating for water, oil, or dust. For a wet, outdoor, or hosedown area you need an enclosure and panel set rated NEMA 3R, 4, or 4X instead.

The perforated version gives you a pre-punched hole pattern so DIN rail, terminal blocks, relays, and mounting feet can be screwed down anywhere on the face without drilling and tapping the steel in the field. A solid flat panel is the better pick when you want full surface area for a large drive or want to lay out holes exactly to a drawing. This one is the perforated type.

The panel is certified to CSA C22.2, which is the Canadian standard family for industrial control enclosures and their components. That is the record we hold on it, alongside the NEMA 1 degree of protection.

It is the panel alone, an accessory for a JIC enclosure. The box, door, and panel mounting studs or clips come with the enclosure itself, so order this when you need a replacement or a second layout panel rather than a complete enclosure.

Order Eaton B-Line model AW1610PP. There is one configuration, so there is no finish or size option to specify.

Steel with a white powder coat. The white finish is standard on B-Line JIC panels because it reflects light inside the enclosure and makes wire labels and component markings easier to read during troubleshooting.

It weighs 2.1 lb, so it handles easily one-handed. Load the components onto the panel on the bench, then set the assembly into the enclosure on its panel mounting studs or brackets, which is the usual reason to buy a spare subpanel rather than wire in place.