B-Line Eaton series panels and panel accessories, 1 rating, White powder coated, Steel, JIC flat perforated panel, Panels and panel accessories, Perf

The AW148PP JIC flat perforated panel measures 12.87 in by 8 in, with a 6.875 in length/depth figure on the spec sheet, and weighs 1.407 lb. Those numbers matter because the panel has to clear the mounting studs inside your enclosure, so compare them against the panel space of the box you're fitting, not the box's outside dimensions.

No. The AW148PP carries a NEMA 1 rating, which is indoor, general purpose protection against incidental contact and falling dirt only. It offers no protection against water, hosedown, oil or dust, so for a wet or outdoor location you want panel hardware matched to a NEMA 4, 4X or 12 enclosure instead.

A perforated panel like the AW148PP gives you a pre-punched hole grid across the whole face, so DIN rail, terminal blocks, relays and wire duct can be bolted anywhere on it without drilling or tapping. A solid steel subpanel is the choice when you need to drill exact hole patterns for large devices or want an unbroken surface behind the components. For general control-panel build-out where layout may change, the perforated version saves layout time.

The AW148PP is certified to CSA C22.2, so it can be specified on Canadian installations where that standard applies. Note the enclosure protection level is NEMA 1, indoor general purpose.

Order by manufacturer part number AW148PP, an Eaton B-Line series JIC flat perforated panel. It's sold as the panel itself; mounting screws or studs are not called out as included, so plan on using the panel mounting hardware that came with your enclosure or ordering it separately.

Steel, with a white powder coat. The white face makes wire markings and component labels easier to read inside the enclosure, and powder coated steel takes drilling and tapping if you need to add mounting holes beyond the existing perforations.