B-Line AW126PP Eaton series panels and panel accessories, NEMA 1 rated, White powder coated steel, JIC flat perforated panel, Panels and panel accessories, Perforated panel

The AW126PP is a JIC flat perforated back panel sized for a 12 x 6 inch enclosure interior, and it measures 10.87 x 6 x 4.875 inches as listed. Measure the mounting studs or brackets inside your box against those dimensions before ordering, since the panel has to sit flat against them.

No. The AW126PP carries a NEMA 1 rating, which is indoor use only, protecting against incidental contact and falling dirt with no provision for water, oil or dust. For washdown, wet locations or outdoor mounting you need a panel and enclosure rated NEMA 4, 4X or 12 instead.

A perforated panel like the AW126PP gives you a grid of holes so terminal blocks, DIN rail, relays and small controls can be fastened anywhere on the field without drilling and without metal chips falling into live gear. A solid JIC panel is the choice when you want to lay out your own hole pattern or need an unbroken surface behind the components. For most control panel work being built out in the field, perforated saves the drill work.

The panel is steel with a white powder coat finish. The white coating makes wire runs and labels easy to read inside the box, and it is the standard interior finish on JIC control enclosures.

Order Eaton B-Line part number AW126PP. It is a single catalog number with no finish or size options to specify, so repeat orders across a facility come back identical.

The AW126PP is supplied as the perforated panel itself. Enclosure back panels normally mount to studs or weld nuts already inside the box, so plan on using the fasteners that came with your enclosure or ordering matching panel mounting screws separately.