Eaton B-Line series panels and panel accessories, NEMA 1 rated, White powder coated steel, JIC flat perforated panel, Panels and panel accessories
Manufacturer Resources
Product Specs
- Certifications:
- NEMA
- Degree Of Protection:
- NEMA 1
- Product Category:
- Panels & panel accessories
- Product Height:
- 12.87 in
- Product Length Depth:
- 10.875 in
- Product Weight:
- 2.227 lb
- Product Width:
- 12 in
- Department:
- Electrical
- Product Group:
- Panels & Plates
- Product Subgroup:
- Panel Accessories
- Product Type:
- JIC flat perforated panel
- Product Details:
- JIC flat perforated panel
- Product Material:
- Steel
B-LINE AW1412PP – Frequently Asked Questions
1) What size enclosure does the Eaton B-Line AW1412PP perforated panel fit?
The AW1412PP is sized for a 14 x 12 inch JIC style enclosure. The panel itself measures 12.87 x 12 x 10.875 inches as listed, so confirm your enclosure's mounting stud spacing matches before you order. It is a flat perforated back panel, not a solid subpanel.
2) Is the AW1412PP panel rated for outdoor or washdown enclosures?
No. The AW1412PP carries a NEMA 1 rating, which is indoor, general purpose protection against incidental contact and falling dirt only. It is not for wet, washdown, or outdoor locations. For those you need an enclosure and panel rated NEMA 3R, 4 or 4X.
3) What is the difference between a perforated back panel and a solid steel subpanel?
A perforated panel like the B-Line AW1412PP gives you a grid of holes across the face, so DIN rail, terminal blocks, relays and wire duct can be fastened anywhere without drilling and tapping. A solid subpanel needs layout and drilling for every device, but gives you full surface for cutting your own pattern. If your control layout changes often, or you are adding devices to an existing enclosure, the perforated panel saves the shop time.
4) What exact part number do I order for the B-Line 14 x 12 white perforated JIC panel?
Order Eaton B-Line AW1412PP. That is the manufacturer part number for the NEMA 1, white powder coated steel JIC flat perforated panel.
5) What is the B-Line AW1412PP panel made of and how is it finished?
Steel with a white powder coat finish. The white face makes wire and component marking easier to read inside a control cabinet, and the powder coat gives a non-conductive surface, so bond any device that needs an equipment ground back to the enclosure ground point rather than relying on panel contact.
6) How much does the AW1412PP back panel weigh for a one-man install?
2.227 lb. Light enough to hang on the enclosure studs single handed, which matters when you are working an existing cabinet in a live panel room.
How fast can I get the B-LINE AW1412PP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE AW1412PP come with a warranty?
Absolutely. The B-LINE AW1412PP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE AW1412PP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE AW1412PP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.