You may also like
B-Line Eaton series strut fittings and accessories, 1.37" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Two hole z-support, Fits channel type B32,
Model: BLN-B106-32GRN
Eaton B-Line series strut fittings and accessories, 1.37" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Two hole z-support, Fits channel type B32, DURA GREEN
B-LINE
$5,481.83
B-Line B116-32ZN Eaton series strut fittings and accessories, 1.37" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 32, Electro-plated
Model: BLN-B116-32ZN
Eaton B-Line series strut fittings and accessories, 1.37" Height, 5.43" Length, 1.62" Width, .84lbs, Steel, Three hole u support, Thickness 1/4 in, Fits channel type 32, Electro-plated
B-LINE
$136.35
$115.73
B-Line B105ZN Eaton series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22, Electro-plated
Model: BLN-B105ZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Offset size 1-5/8 in, Three hole z-support, Thickness 1/4 in, Fits channel type B22,...
B-LINE
$78.68
$38.57
B-Line B106-42ZN Eaton series strut fittings and accessories, 1" Height, 3.5" Length, 1.62" Width, .44lbs, Steel, Offset size 1 in, Two hole z-support, Thickness 1/4 in, Fits channel type B42, Electro-plated
Model: BLN-B106-42ZN
Eaton B-Line series strut fittings and accessories, 1" Height, 3.5" Length, 1.62" Width, .44lbs, Steel, Offset size 1 in, Two hole z-support, Thickness 1/4 in, Fits channel type B42, Electro-plated
B-LINE
$88.54
$52.09
B-Line B106-52ZN Eaton series strut fittings and accessories, .811" Height, 3.5" Length, 1.62" Width, .40lbs, Steel, Offset size 13/16 in, Two hole z-support, Thickness 1/4 in, Fits channel type B42, Electro-plated
Model: BLN-B106-52ZN
Eaton B-Line series strut fittings and accessories, .811" Height, 3.5" Length, 1.62" Width, .40lbs, Steel, Offset size 13/16 in, Two hole z-support, Thickness 1/4 in, Fits channel type B42,...
B-LINE
$88.48
$52.09
Eaton B-Line series strut fittings and accessories, 1.37" Height, 3.5" Length, 1.62" Width, .51lbs, Steel, Two hole z-support, Fits channel type B32, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- Fits channel type B32
- Product Height:
- 1.37 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- .51 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Two hole z-support
- Product Finish:
- Electro-plated
- Product Details:
- Two hole z-support
- Product Material:
- Steel
- Product Length:
- 3.5 in
B-LINE B106-32ZN – Frequently Asked Questions
1) What is a two hole z-support used for on strut channel?
A z-support is an offset bracket: the two bolt holes sit on different planes so you can pick up a strut run or a piece of equipment that is set back from the mounting surface. The B106-32ZN is the two hole version, so it carries one fastener at each leg. Use it where a flat plate would leave a gap or where the load has to stand off from the wall or structure.
2) Is the electro-plated finish on the B106-32ZN okay for outdoor or damp locations?
Electro-plated zinc is a thin indoor-grade coating. The B106-32ZN is steel with an electro-plated finish, which suits dry interior electrical and mechanical work. For exterior, wash-down, or corrosive service, specify a hot-dip galvanized or stainless fitting in the same B32 channel family instead.
3) How much room does the B106-32ZN z-support take up in a tight ceiling space?
Its footprint is 3.5 inches long, 1.62 inches wide, and 1.37 inches high, so it needs a little over an inch and a third of clearance off the mounting face plus the strut and hardware stacked on top. At about half a pound each (.51 lb), a bag of them adds very little to the hanger load.
4) Does the B106-32ZN come with the channel nuts and bolts to mount it?
The B106-32ZN is the z-support fitting on its own. Channel nuts, bolts, and washers are ordered separately, so size your hardware to the B32 channel you're fastening into and to the hole size in the fitting before you head to the job.
5) What is the exact part number to order this Eaton B-Line z-support?
Order it as B106-32ZN from Eaton's B-Line series. The ZN suffix is the electro-plated zinc finish and the 32 ties it to B32 channel, so B106 in another finish or another channel size is a different part.
6) Is the B-Line B106-32ZN listed or certified to any standard?
No listing or certification is carried on the B106-32ZN; it is a mechanical strut fitting, steel with an electro-plated finish, rather than an electrically rated device. Spec it on the mechanical merits, channel type B32 and the load your engineer signs off on.
How fast can I get the B-LINE B106-32ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B106-32ZN come with a warranty?
Absolutely. The B-LINE B106-32ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B106-32ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B106-32ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.