You may also like
B-Line B236RZN Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Electro-plated
Model: BLN-B236RZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Electro-plated
B-LINE
$96.84
$55.98
B-Line Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90
Model: BLN-B236LGRN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, DURA GREEN
B-LINE
$5,830.05
B-Line B236LSS4 Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Stainless steel type 304
Model: BLN-B236LSS4
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Stainless steel type 304
B-LINE
$196.67
$174.71
B-Line B236LHDG Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Hot-dipped galvanized
Model: BLN-B236LHDG
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Hot-dipped galvanized
B-LINE
$113.66
$76.34
B-Line B236LSS6 Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Stainless steel type 316
Model: BLN-B236LSS6
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Stainless steel type 316
B-LINE
$312.92
$312.11
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 2.06 in
- Product Weight:
- .65 lb
- Product Width:
- 1.87 in
- Department:
- Electrical
- Product Type:
- Left hand three hole offset bent angle, 90 deg
- Product Finish:
- Electro-plated
- Product Details:
- Left hand three hole offset bent angle, 90 deg
- Product Material:
- Steel
- Product Length:
- 2.06 in
B-LINE B236LZN – Frequently Asked Questions
1) Is the B-Line B236LZN strut fitting left hand or right hand?
The B236LZN is the left hand version of the three hole offset bent angle. Handing matters on an offset bracket: the bend throws the mounting leg to one side, so a left hand piece mirrors the right hand one and will not sit the same way on the strut. Order the hand that matches the direction your run turns.
2) I need to match an existing Eaton B-Line strut bracket on a job. What part number is this?
The manufacturer part number is B236LZN, an Eaton B-Line series strut fitting. The ZN suffix corresponds to the electro-plated steel finish, and the L denotes left hand. If the piece you are matching turns the other direction, you want the right hand counterpart instead.
3) What angle does the B-Line B236LZN bracket turn, and how many bolt holes does it have?
It turns 90 degrees and carries three holes, in an offset bent angle configuration. That gives you a right angle transition between two strut members or between strut and a structure, with the offset stepping the mating leg out of plane rather than meeting flush.
4) Is the electro-plated finish on the B236LZN suitable for outdoor or damp locations?
The B236LZN is steel with an electro-plated finish, which is a light protective plating intended for dry indoor use. For exterior runs, wash-down areas, or corrosive environments, specify a hot dip galvanized or stainless strut fitting instead.
5) Does the B-Line B236LZN come with bolts, nuts, or strut channel nuts?
The B236LZN is supplied as the bracket alone. Fasteners are not part of it, so plan on ordering strut nuts and hex bolts in the size your channel takes, plus whatever anchors the structural side of the connection.
6) When would I use an offset bent angle instead of a flat 90 degree corner angle on strut?
Use the offset version when the two strut members do not meet in the same plane. The bend steps the connection across so the bracket can bolt to the face of one channel and the face of another that sits behind or beside it. If both members are flush in a single plane, a plain flat 90 degree angle is the simpler part. The B236LZN is the offset, three hole, left hand piece.
How fast can I get the B-LINE B236LZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B236LZN come with a warranty?
Absolutely. The B-LINE B236LZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B236LZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B236LZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.