You may also like
B-Line B236LZN Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Electro-plated
Model: BLN-B236LZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Electro-plated
B-LINE
$96.84
$55.98
B-Line Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90
Model: BLN-B236LGRN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, DURA GREEN
B-LINE
$5,830.05
B-Line B236LSS4 Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Stainless steel type 304
Model: BLN-B236LSS4
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Stainless steel type 304
B-LINE
$196.67
$174.71
B-Line B236LSS6 Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Stainless steel type 316
Model: BLN-B236LSS6
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Stainless steel type 316
B-LINE
$312.92
$312.11
B-Line Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90
Model: BLN-B236RHDG
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Hot-dipped galvanized
B-LINE
$7,558.55
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Left hand three hole offset bent angle, 90 deg, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 2.06 in
- Product Weight:
- .65 lb
- Product Width:
- 1.87 in
- Department:
- Electrical
- Product Type:
- Left hand three hole offset bent angle, 90 deg
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Left hand three hole offset bent angle, 90 deg
- Product Material:
- Steel
- Product Length:
- 2.06 in
B-LINE B236LHDG – Frequently Asked Questions
1) Is the B-Line B236LHDG a left hand or right hand offset angle fitting?
The B236LHDG is the left hand version of the three hole offset bent angle, bent at 90 degrees. Handing matters on an offset fitting: the leg steps off to one side, so a left hand piece mirrors the right hand piece and they are not interchangeable if the strut run has to land on a specific side. If your offset needs to break the other direction, order the right hand equivalent in the same B236 family.
2) Can the B236LHDG strut fitting be used outdoors or in a damp location?
Yes. The fitting is steel with a hot-dipped galvanized finish, which is the finish normally specified for exterior runs, wash-down areas, parking structures and other damp or corrosive locations. For dry indoor work an electro-galvanized fitting would do, but hot-dip gives the heavier zinc coating.
3) Do bolts and channel nuts come with the B236LHDG angle fitting?
No. The B236LHDG ships as the bare galvanized steel fitting only. Hardware is ordered separately, so plan on strut nuts and bolts for each of the three holes, and match the hardware finish to the fitting if the run is outdoors.
4) When do I use an offset bent angle instead of a plain 90 degree angle bracket on strut?
Use the offset version when the two strut members or the strut and the mounting surface do not sit in the same plane and you need the connection to step over by a set amount. A flat 90 degree angle assumes both faces meet flush. The B236LHDG carries that offset built into the bend, with three bolt holes and a 90 degree turn, so you are not shimming the joint to make it up on site.
5) What is the exact part number to order for the B-Line left hand offset angle?
Order Eaton B-Line part number B236LHDG. The LH in the number is the left hand handing and the DG is the hot-dipped galvanized finish, so the same base fitting appears under other suffixes for other finishes and the opposite hand.
How fast can I get the B-LINE B236LHDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B236LHDG come with a warranty?
Absolutely. The B-LINE B236LHDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B236LHDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B236LHDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.