You may also like
Eaton B-Line series wireway end, 1.50 inch Knockout, Wireway end, NEMA 1, Steel, ANSI 61 gray painted, 10" X 10"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 10 in
- Product Length Depth:
- 10 in
- Product Weight:
- 2.243 lb
- Product Width:
- 10 in
- Special Features:
- 1.50 inch knockout
- Department:
- Electrical
- Product Type:
- Wireway end
- Product Details:
- Wireway end
- Product Material:
- Steel
B-LINE 1010 HSE – Frequently Asked Questions
1) Will the Eaton B-Line 1010 HSE wireway end fit a 10 x 10 wireway trough?
Yes. The 1010 HSE end plate is sized 10 by 10 inches, so it closes off the open end of a 10 x 10 inch wireway run. It will not cover a 4 x 4, 6 x 6, or 8 x 8 trough, and it is undersized for a 12 x 12, so match the end to the trough dimension you actually installed.
2) Is the B-Line 1010 HSE wireway end rated for indoor NEMA 1 use only?
It is a NEMA 1 degree of protection part, which is indoor, general purpose, no rain or washdown rating. For outdoor or wet locations you need a NEMA 3R rated wireway and end. The 1010 HSE is also UL Listed.
3) Does this wireway end plate come with a knockout for conduit?
Yes, the 1010 HSE end is supplied with a 1.50 inch knockout, so you can land a 1-1/4 inch conduit hub or fitting through the end of the run without drilling the plate. If you need it fully closed, just leave the knockout in place.
4) What color and material is the B-Line 1010 wireway end, and will it match my existing gray trough?
Steel, finished in ANSI 61 gray paint. That is the standard gray used across B-Line wireway and most electrical enclosures, so it matches a typical existing gray trough run visually.
5) What is the Eaton part number for the 10 inch by 10 inch B-Line wireway end?
Order it as 1010 HSE from Eaton's B-Line series. That is the 10 x 10 inch NEMA 1 steel end with the 1.50 inch knockout, ANSI 61 gray.
6) Is a wireway end the same thing as a wireway cover or a closure plate?
No. A wireway end like the 1010 HSE caps the open end of the trough, the flat face at the termination of a run. The cover is the long removable lid along the top or front of the trough body. If you are trying to close a run at a wall or at the last section, the end is the part you want.
7) How heavy is a 10 x 10 wireway end plate for shipping and handling?
The 1010 HSE weighs 2.243 lb. Light enough for one person to hold in place while starting the fasteners, and worth noting if you are ordering a quantity for a large wireway run.
How fast can I get the B-LINE 1010 HSE delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1010 HSE come with a warranty?
Absolutely. The B-LINE 1010 HSE is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1010 HSE?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1010 HSE from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.