Eaton B-Line series wiring trough, 6" height, 36" length, 6" width, 4XSWT wiring trough, Welded external mounting feet, Hinged cover, NEMA 4X, 304 stainless steel, Seamless poured in-place, Hinged, #4 brushed finish, 14 gauge
Manufacturer Resources
Product Specs
- Certifications:
- CSA C22.2.
- Closure Type:
- Hinged
- Finish Color:
- #4 brushed
- Material Thickness:
- 14 gauge
- Product Height:
- 6 in
- Product Length Depth:
- 36 in
- Product Weight:
- 23.645 lb
- Product Width:
- 6 in
- Special Features:
- Cover heldby semi-hinges,screw clamps,s.s hardware
- Department:
- Electrical
- Product Type:
- 4XSWT wiring trough
- Product Details:
- 4XSWT wiring trough
B-LINE 6636-4XSWT – Frequently Asked Questions
1) Is the Eaton B-Line 6636-4XSWT wiring trough rated for washdown or outdoor use?
The 6636-4XSWT is a NEMA 4X trough in 304 stainless steel with a seamless poured in-place gasket, which is the combination used for washdown, food processing, and corrosive or wet locations. It also carries CSA C22.2 certification.
2) What are the internal cross section and length of the B-Line 6636-4XSWT trough?
It runs 36 inches long with a 6 by 6 inch cross section (6 inch height, 6 inch width). That 6x6 body is the common size for pulling and splicing multiple conductors between panels without exceeding wire-bending room. Shipping mass is about 23.645 lb.
3) Does this stainless wiring trough have a hinged cover or a screw-on lid?
Hinged. The cover on the 6636-4XSWT is held by semi-hinges with screw clamps and stainless steel hardware, so it swings open for pulling and re-clamps without loose lid screws to drop into the enclosure.
4) How does the 6636-4XSWT trough mount to a wall or strut?
It comes with welded external mounting feet, so the body stands off the mounting surface and you fasten through the feet rather than drilling the enclosure wall. Drilling the body would compromise the NEMA 4X seal.
5) Does the wiring trough come with knockouts or do I have to punch my own openings?
The 4XSWT is a sealed NEMA 4X enclosure body, so conduit openings are made in the field to suit your run. Punch with a hole saw or knockout punch and use 4X rated fittings with sealing washers, otherwise the rating is lost at the penetration.
6) Is a stainless 4X trough overkill for an indoor electrical room?
For a dry indoor electrical room a painted steel NEMA 1 trough is the usual choice. The 6636-4XSWT earns its cost where there is hose-down cleaning, humidity, salt air, or chemical exposure, since the 304 stainless body and poured in-place gasket are what hold a NEMA 4X seal in those conditions.
7) What gauge and finish is the B-Line 4XSWT stainless trough?
14 gauge 304 stainless with a #4 brushed finish. The #4 brush is the standard architectural and sanitary finish, so it matches adjacent stainless panels and washes down cleanly.
How fast can I get the B-LINE 6636-4XSWT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 6636-4XSWT come with a warranty?
Absolutely. The B-LINE 6636-4XSWT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 6636-4XSWT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 6636-4XSWT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.