Eaton BR Series BRP Main Lug Load Center (MLO), Single-Phase 120/240V
The Eaton BR Series BRP main lug load center (MLO) distributes single-phase 120/240V power in residential and light commercial installations. The panel accepts Type BR 1-inch breakers, carries a 10 kAIC interrupt rating, and is available in 125A and 200A ratings with 12, 16, 24, 30, or 40 spaces. Enclosure options include indoor, outdoor, and configurations with pre-installed ground bars.
Key Specifications
- Voltage Rating: 120/240V single-phase
- Amperage: 125A or 200A (select by variant)
- Spaces: 12, 16, 24, 30, or 40 (select by variant)
- Interrupt Rating: 10 kAIC
- Compatible Breakers: Type BR 1-inch breakers
- Bus Material: Aluminum
- Mounting: Surface or flush
- Enclosure: Metallic, indoor or outdoor (select by variant)
- Ground Bars: Pre-installed on select variants; verify at time of selection
- Cover: Included
- Configuration: Main lug only (MLO)
Typical Applications
- Residential service panels and sub-panels
- Light commercial electrical distribution
- Multi-unit residential and apartment properties
- Workshop, garage, and outbuilding sub-panels
- Electrical system upgrades requiring MLO configuration
Variant Specifications
| Amperage | Number of Spaces | Enclosure Option | Box Size Option | Spaces / Max Circuits | SKU |
|---|---|---|---|---|---|
| 125A | 12 | Indoor | X0 | Standard | BRP12L125 |
| 125A | 12 | Ground bars installed | X0 | Standard | BRP12L125G |
| 125A | 12 | Outdoor | X0R | Standard | BRP12L125R |
| 200A | Standard | Outdoor | X1R | 46/15 | BRP12L200R |
| 125A | 16 | No ground bar installed | X1 | Standard | BRP16L125 |
| 125A | 16 | Ground bars installed | X1 | Standard | BRP16L125G |
| 125A | 16 | Outdoor | X1R | Standard | BRP16L125R |
| 125A | 24 | No ground bar installed | X3 | Standard | BRP24L125 |
| 125A | 24 | Ground bars installed | X3 | Standard | BRP24L125G |
| 200A | Standard | Indoor | X4 | 24/48 | BRP24L200 |
| 125A | 30 | Indoor | X5 | Standard | BRP30L125 |
| 200A | Standard | Indoor | X5 | 30/60 | BRP30L200 |
| 200A | Standard | Outdoor | X5 | 30/60 | BRP30L200G |
| 200A | Standard | Indoor | X5R | 30/60 | BRP30L200R |
| 200A | Standard | Indoor | X6 | 40/80 | BRP40L200 |
| 200A | Standard | Ground bars installed | X6 | 40/80 | BRP40L200G |
| 200A | Standard | Outdoor | X6R | 40/80 | BRP40L200R |
Manufacturer Resources
Product Specs
- Enclosure Material:
- Metallic
- Phase:
- Single-phase
- Bus Material:
- Aluminum
- Department:
- Electrical
- Number Of Poles:
- Single-pole
- Product Type:
- Load Center
- Product Color:
- Grey
- Voltage Rating:
- 120/240V
- Interrupt Rating:
- 10 kAIC
- Mounting Method:
- Surface, flush
- Used With:
- Type BR 1-inch breakers
- Product Group:
- Power Distribution
- Cover Type:
- Cover included
- Product Details:
- Main Lug Only (MLO)
- Product Subgroup:
- Panelboards & Load Centers
Eaton BRP12L125 – Frequently Asked Questions
1) Will an Eaton BR loadcenter take my existing breakers, or do I need Type BR?
Type BR 1-inch breakers only. The bus in a BR Series loadcenter is stamped for Eaton's BR footprint, so Cutler-Hammer CH breakers (1-inch classified as a different bus) and other brands are not the right fit. If you are standardizing a building on BR panels, every branch breaker you stock should be Type BR.
2) What does MLO mean on the Eaton BR loadcenter, and can I use it as my service panel?
MLO is main lug only, meaning there is no main breaker in the panel. Wire lands directly on the lugs, so overcurrent protection has to come from upstream. That makes the BR Series MLO unit right for a subpanel or a downstream distribution panel fed from a main disconnect elsewhere. If you need the panel itself to serve as service equipment with a main disconnect, order a main breaker version instead.
3) Is the Eaton BR loadcenter rated for outdoor use?
Both. The BR Series MLO comes in indoor and outdoor enclosure versions, and the outdoor boxes carry an R in the box size code (X0R, X1R, X5R, X6R). If the panel is going on an exterior wall, a pedestal, or in an unconditioned space exposed to weather, pick an R box. The indoor codes (X0, X1, X3, X4, X5, X6) are for protected interior locations.
4) Does the Eaton BR loadcenter come with a ground bar, or do I order that separately?
Depends which version you order. The enclosure option axis includes "Ground bars installed" as its own choice, alongside plain indoor, outdoor, and a no-bar version. On a subpanel you need the ground bar isolated from the neutral, so specify a ground-bar version and keep the bonding screw out. Ordering the wrong one means a trip back for a ground bar kit.
5) How many circuits do the Eaton BR main lug panels hold?
Space counts run 12, 16, 24, and 30 spaces on the 125A units. The 200A units are listed by space and maximum circuit count: 24/48, 30/60, and 40/80, meaning a 30-space panel accepts up to 60 circuits when tandem breakers are used in the spaces that allow them. Count your circuits, then add spares before you pick, because a panel with no room left is the reason electricians end up adding a second subpanel.
6) Will the Eaton BR loadcenter work on a 120/240V single-phase service?
That is exactly what it is built for. The BR Series MLO panel is single-phase, 120/240V, which is standard residential and light commercial service in North America. It gives you 120V from either hot leg to neutral and 240V across both for ranges, dryers, water heaters, and compressors. It is not a three-phase panel, so a 208Y/120 or 480V three-phase distribution job needs a different product.
7) Should I get the 125A or the 200A Eaton BR loadcenter?
Size it to the feeder, not the number of circuits. The 125A BR MLO units cover subpanels and smaller distribution: garage, workshop, an apartment unit fed from a house panel. The 200A units are for a full-size distribution panel downstream of a 200A service disconnect, and they are the ones that carry the larger space counts (up to 40 spaces, 80 circuits). The lug rating has to match or exceed the overcurrent device feeding it.
8) Can the Eaton BR loadcenter be recessed into a wall, or does it have to surface mount?
Either. The BR Series MLO enclosure is rated for surface or flush mounting, so you can hang it on finished block or drywall, or set it between studs and trim it out flush. Flush mounting works best on new construction or an open wall; on a retrofit into finished drywall, surface mounting saves you the patching.
9) I manage apartments with Eaton BR panels already. Can I standardize new units on this loadcenter?
Yes, and that is the practical argument for it. Every unit takes the same Type BR 1-inch breakers, so one breaker stock covers the whole property regardless of which panel size went into which unit. The range spans 12-space subpanels up to 40-space 200A distribution panels, indoor and outdoor, on the same bus and the same 120/240V single-phase configuration. Maintenance crews learn one panel.
10) Is the bus in the Eaton BR loadcenter copper or aluminum?
Aluminum bus. That is the standard construction on BR Series loadcenters and it is what most residential and light commercial panels use. Practical consequence on the job: use the right antioxidant and torque values on aluminum feeder conductors landing at the lugs, and torque the lugs to spec rather than by feel, since loose aluminum terminations are the usual cause of hot lugs in a panel.
11) What does the enclosure and cover look like for a BR panel going in a finished space?
Metallic enclosure in grey, with the cover included. For a tenant hallway, an office, or a finished basement the grey painted steel box reads as standard electrical equipment and takes paint if the space calls for it. Since the cover ships with the panel, you are not sourcing a separate trim or door to close it out.
How fast can I get the Eaton BRP12L125 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton BRP12L125 come with a warranty?
Absolutely. The Eaton BRP12L125 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton BRP12L125?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Eaton BRP12L125 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.