Eaton Freedom C440 Series NEMA...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$504.20
Eaton Freedom C440 Series NEMA Non-Reversing Motor Starter, Open Type

Eaton Freedom C440 Series NEMA Non-Reversing Motor Starter, Open Type

(No reviews yet) Write a Review

Model: AN19BN0A5E020
$504.20

In Stock (leaves warehouse same day if ordered before 3pm ET)

$504.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Eaton Freedom C440 Series NEMA Non-Reversing Motor Starter, Open Type

The Eaton Freedom C440 Series NEMA Non-Reversing Motor Starter delivers dependable, UL Listed motor control for commercial and industrial power systems. Built on Eaton's established Freedom C440 platform, this open-type starter is engineered for direct-on-line, full voltage non-reversing motor starting duty. The family spans NEMA Sizes 00 through 5, with coil voltages including 120V and 208V and amperage ratings from 9 amperes up to 270 amperes, giving electrical contractors and facility maintenance teams a wide range of full-voltage switching options for fixed-direction industrial motor loads.

Key Features

  • Eaton Freedom C440 Series: Part of Eaton's established Freedom C440 motor control line, built for consistent performance in industrial environments.
  • Full Voltage Non-Reversing Design: Provides direct-on-line start/stop motor control without reversing capability, suited to fixed-direction motor loads.
  • Coil-Driven Operation: Available in a range of coil voltages, including 120V and 208V, for reliable, consistent switching and straightforward integration into standard control circuits.
  • Robust NEMA Construction: Sized to NEMA standards (Sizes 00 through 5) for dependable motor control across a range of full-voltage industrial applications.
  • Wide Amperage Range: Available from 9 amperes up to 270 amperes to match varying motor load requirements.
  • Open Type, Panel-Ready Footprint: Designed for straightforward mounting in motor control panels and enclosures.

Certifications & Compliance

  • UL Listed

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Industrial Motor Control Panels and Motor Control Centers
  • Commercial and Industrial Electrical Installations
  • Full-Voltage, Non-Reversing Motor Starting Systems
  • Panelboard and Control Enclosure Wiring
  • New Construction and Retrofit Motor Control Upgrades
  • Facility Maintenance and Motor Replacement Projects

Why Eaton?

Eaton's Freedom C440 Series motor starters combine UL Listed construction with reliable coil-driven switching to deliver dependable, code-compliant motor control for critical industrial and commercial applications. With coverage across NEMA Sizes 00 through 5 and amperage ratings from 9 to 270 amperes, the Freedom C440 platform gives electrical professionals a trusted full-voltage non-reversing starter engineered for consistent performance in motor control centers and industrial panels alike.

Manufacturer Resources

Product Specs

Product Type:
Motor Starter
Series:
Freedom C440
Listing:
UL Listed
Configuration:
Non-Reversing
Amperage Rating:
9A - 270A
Department:
Electrical
Product Group:
Starters & Contactors

Eaton AN19BN0A5E020 – Frequently Asked Questions

1) Can the Eaton Freedom C440 non-reversing starter run a motor in both directions?
No. The Freedom C440 open-type starter covered here is a full voltage non-reversing device, so it only does direct-on-line start and stop in one fixed direction. If the load needs forward and reverse (a conveyor, hoist, or damper drive), you need a reversing starter with the mechanical and electrical interlock between two contactors instead.
2) What coil voltages does the Eaton Freedom C440 starter come in, and how do I pick the right one?
Two control voltages are offered: 120V and 208V coils. The coil voltage has to match your control circuit, not the motor. If the panel runs a 120V control transformer secondary, take a 120V coil part such as AN19GN0A5E045; if the control circuit is fed at 208V, take a 208V coil part such as AN19GN0E5E045. Putting a 208V coil on a 120V circuit will not pull the contactor in.
3) What amperage range do the Eaton Freedom C440 starters cover?
From 9 amperes up to 270 amperes across the family, with common steps at 9A, 18A, 45A, 90A and 270A. Size to the motor full load amps off the nameplate plus the service factor, then confirm the NEMA size matches the horsepower at your system voltage. A 9 ampere unit such as AN19AN0A5E005 covers small fractional loads; the 270 ampere AN19SN0A5E300 handles the large end.
4) Is the Eaton Freedom C440 starter open type or does it come in an enclosure?
These are open-type starters, built as a panel-ready chassis for mounting inside a motor control panel, MCC bucket, or an enclosure you supply. There is no housing, cover, or pushbutton included, so if the starter is going on a wall or in a wet or dusty area you will need to order a separate NEMA-rated enclosure to put it in.
5) What NEMA sizes are available in the Eaton Freedom C440 non-reversing line?
The family runs NEMA Size 00 through Size 5. Individual part numbers land on specific sizes: AN19BN0A5E005 is a Size 0, AN19DN0E5E020 covers Sizes 0-1, AN19KN0E5E100 covers Sizes 2-3, and AN19NN0A5E140 is a Size 4. NEMA sizing is horsepower-based, so match the size to the motor HP at your line voltage rather than to the ampere figure alone.
6) Is the Eaton Freedom C440 motor starter UL Listed for a code inspection?
UL Listed, yes. That is the rating an inspector or a spec writer on an industrial control panel job is looking for, and it applies across the Freedom C440 non-reversing open-type range.
7) What information do I need before ordering an Eaton Freedom C440 starter?
Three things off the motor and the panel drawing: the motor horsepower and line voltage, which sets the NEMA size (00 through 5); the full load amps, which sets the ampere rating anywhere from 9A to 270A; and the control circuit voltage, 120V or 208V, which sets the coil. Get those and the part number follows. Since these ship open type, also confirm whether the job needs a separate enclosure.
8) Can I use a Freedom C440 starter to replace an existing starter in a motor control center bucket?
That is one of the intended uses. The C440 non-reversing open-type starters are built for motor control centers, industrial control panels, and retrofit motor control upgrades. For a like-for-like swap, match the NEMA size, the ampere rating, and the coil voltage of the unit coming out, and verify the existing bucket's mounting and wiring layout suits the replacement chassis before you pull the old one.
9) Is a Freedom C440 full voltage starter the right choice, or do I need a soft start or VFD?
A full voltage, direct-on-line starter like the C440 throws the motor straight across the line, which is the simplest and cheapest way to run a fixed-speed, fixed-direction load: pumps, fans, compressors, blowers. It draws full inrush on every start. If the application needs speed control, reduced inrush on a weak service, or torque ramping to protect a driveline, a soft starter or a VFD is the correct product instead.
How fast can I get the Eaton AN19BN0A5E020 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Eaton AN19BN0A5E020 come with a warranty?
Absolutely. The Eaton AN19BN0A5E020 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Eaton AN19BN0A5E020?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Eaton AN19BN0A5E020 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!